CAMOUFLAGE PAINTING TO BUILDINGS IN TECHNICAL AREA AT AF STATION SURATGARH

Amount

BOQ (CAMOUFLAGE PAINTING TO BUILDINGS IN TECHNICAL AREA AT AF STATION SURATGARH.)

M&L for spray painting (by electrostatic process) over Hanger steel surface by applying two coats of synthetic enamel paint in camouflaging patterns(Multi Colour shall be used as approved) over a coat of zinc chrome primer under high pressure at 20MPA through electical pump, having nozzle dia 0.15mm to 0.2mm and max flow 1.8L to 3L per min with air hose length 10m including preparation of old steel surface including brooming down or steel wire brushing scraping down smoke soot, moulds mass ,spots and applying 1 to 1.5mm synthetic zinc oxide putty to recieve smooth finished of steel surface complete all as specified and directed. Note- Spray painting shall be carried out at hanger, quoted rates shall be included for necessay scaffolding of height upto 10 m, safety belt and all other necessary T&P.

M&L for spray painting (by electrostatic process) over Hanger steel surface by applying two coats of aluminium paint under high pressure at 20MPA through electical pump, having nozzle dia 0.15mm to 0.2mm and max flow 1.8L to 3L per min with air hose length 10m including preparation of old steel surface including brooming down or steel wire brushing scraping down smoke soot, moulds mass ,spots and applying 1 to 1.5mm synthetic zinc oxide putty to recieve smooth finished of steel surface complete all as specified and directed. Note- Spray painting shall be carried out at hanger, rates shall be included for necessay scaffolding of height upto 10 m, safety belt and all other necessary T&P.

M & L for Guniting work to RCC work in columns , beams , chajjas, balconies , slabs , landings and roof projection etc by removing loose concrete, cleaning of surfaces with brush and applying one coat of epoxy paint SIKA/fosroc to rusted reinforcement including welded wire mesh fabric of wire not less than 95mm X 95mm X 3mm , adhesive plaster grade for concrete admixture non providing guniting pressure 2.00/2.50 Kgs/sqm with admixture , 1part of cement and 3.25 part of sand with a thickness of 50mm averaging and making the surfaces even and smooth including all necessary form work /scrap folding and applying 5mm thick cement plaster in CM(1:3) complete all as specified and directed by Engr-in-charge.

M&L for painting old steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint of different colour of approved tint including preparation of surfaces, complete all as specified and directed.

M&L for painting old wooden surfaces. exc 10 cm width or girth and applying two coats of synthetic enamel paint of different colour of approved tint including preparation of surfaces, complete all as specified and directed.

Hacking out old broken glass (any thickness , size , quality or description) from metal frame including punching or drilling out old glazing pins /spring clips and provding and fixing new ones, complete all as specified and directed.

S&F 3 mm thick plain sheet glass ordinary quality & glazing with oil putty in square n exc 0.50sqm in each pane, complete all as specified and directed.

S&F figured glass, pin head type 5 mm thick and glazing with beads in squares exceeding 0.5sqm in each pane, complete all as specified and directed.

S&F figured glass, pin head type 5 mm thick and glazing with beads in squares not exceeding 0.5sqm in each pane, complete all as specified and directed.

Dismantling existing water storage tank of capacity 500 ltrs capacity and removing to store, complete all as specified and directed.

S&F 500 liters capacity rotational moulded polyethylene water storage tank ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete all as speceified and directed.

S&F in repairs 20mm bore dia nipple suitable for HDPE water tank. (minimum weight 45gms), complete all as specified and directed.

S&F, in repair 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule, complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces on ceiling / facia /RCC Chhaja etc & finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Rough cast plaster over and including 10 mm thick rendering in CM 1:4 as base coat on external surfaces of brick work finished even and fair complete all as specified and directed.

M&L for applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns , including preparation over new plastered surfaces complete all as specified and directed.

M&L for 3 coats of white washing on newely plastered ceiling surfaces including preparation of surfaces, complete all as specified and directed.

M&L for preparation of old surfaces of walls/ceiling including brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots complete all as specified and directed.

M&L for 1.5 mm thick wall care putty to make surface smooth to receive finishes complete all as specified and directed.

M&L for painting of treated surfaces to receive one coat of oil bound distemper on surfaces of walls ,complete all as specified and directed.

M&L for painting of treated surfaces to receive one coat of oil bound distemper on surfaces of ceiling complete all as specified and directed.

M&L for painting of treated surfaces to receive two coats of distemper oil emulsion on surfaces of walls complete all as specified and directed.

M&L for painting with one coat of synthetic enamel paint on plastered surfaces including preparation of old decorated surfaces of walls/kerb stone etc complete all as specified and directed by Engineer in Charge.

Preparation of surfaces after complete removal of old existing painting from concrete /bituminous surfaces and applying two coats of acrylic water based road marking paint over the lines, dashes, arrows letters etc. on concrete / bituminous pavement exceeding 10 cm width complete all as specified and directed by Engineer-in-Charge.

Preparation of old surfaces of walls/Chajja/cills including brooming down or steel wire brushing scrapping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots and applying one coat of exterior acrylic emulsion paint (antifungal), (in camouflage pattern using number of colours), complete all as specified and directed by the Engineer-in-Charge. Note:- (i) The contractor shall procure 50% quantity of exterior acrylic emulsion paint required in the work within 15 days from the date of commencment and deposit the same in the custody of Engr-in-Charge. Engr-in-Charge shall maintain a record of the material brought and consumed at site in the work and purchase vouchers shall be defaceed and verified by the Engr-in-Charge and same shall be submitted to GE for verification. (ii) Material shall be recorded in MB under proprietary branded material duly signed by all concerned. (iii) Pattern of camouflage shall be approved by GE.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), and removing serviceable tiles to store and rubbish off the premises, complete all as specifed and directed.

M&L for granite tile 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite store including cutting and polishing etc as in flooring laid over 15mm thick screed bed or bedding layer in CM 1:4, complete all as specifed and directed.

M&L for granite tile 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite store including cutting and polishing etc in verticle surfaces such as dado/skirting over 10mm thickrendering in CM 1:4 on fair faces of brick work or concrete surface to receive top layer, complete all as specifed and directed.

M&L for preparation of black top surfaces of road and applying one coat of retro-reflective thermoplastic road marking paint conforming to clause No 803.4 of '' Specification for road & bridge work'' issued by MORT&H (Ministry of Road Transport & Highways, complete all as specified and directed. Make:- APCO MARK of Asian Paints or Equivalent.

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

SHILPI CONSTRUCTION COMPANY

M/s Tiwari & Sons

M/s Shubham Enterprises

M/S Shree Ram Enterprises

Aggarwal brothers and company