Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹5.0 L
EMD Value
₹10,020
Closing Date
25 Oct 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Repair and maintenance civil works for installation of lift in A and T I building at HAL Factory Lucknow
9879
HAL-AD/9904/4596/CE/24/
Works
Accessories Complex - Lucknow Divn - Works - Civil
₹0
₹10,020
25 Oct 2024
3 Oct 2024
3 Oct 2024
25 Oct 2024
Dismantling of brick work / R:C:C: / cement concrete etc. of any description by manual/ mechanical means in flooring or columns, beams etc. including stacking of servicable material and disposal of unserviceable material as per direction, including cleaning and removing the debries upto a lead of 50 mtrs. including cost of all labours, scaffolding, T & P etc,including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Dismantling/ Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge: Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) stacking serviceable and unserviceable material separately including cutting reinforcement bars including cleaning, cost of all labours, scaffolding, T & P etc. all complete at all height as per specification and as directed by Engineer in charge.
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead and depositing to Civil Factory store : Of area 3 sq. metres and below including cost of all materials, labours, scaffoldings, T & P, wastages, cutting as per requriement etc.including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m; All kinds of soil, complete for foundations, column footing, wall foundation, manholes, post holes, trenches etc. returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm. dewatering if requried, dressing the sides, dispoal of exess surplus soil etc including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing & laying PCC: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, under floors or any other similar description of works eg. drains, pipe lines bedding layers, road, chambers etc with mechanical mixing including form work, side shuttering, compaction, curing including , materials, labour, T&P etc, required for proper completion of the work, including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing and laying Reinforced cement concrete / cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, beam, lintel, posts and struts, chajja, fascia , circular column / structure, etc or any other similar description of works etc including mechanical / manual mixing , wastage, compaction, curing also making contraction joints/ grooves, if required etc. above plinth level up to floor five level, including cost of centering, shuttering, finishing : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing & laying cement concrete 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size of Bahratcoop/Dala/Jhansi) in floor, approach roads, for any description of works etc. including mechanical / manual mixing , wastage, compaction, curing also making contraction joints/grooves, if required with all labour, material, T&P etc. all complete as per direction of EIC
Providing and laying Deformed or twisted steel reinforcement ISI marked TMT Bars of approved make SAIL, TISCON, RINL or as approved by EIC, of any dia as per IS 1786 ( latest version) for all type of R.C.C works, straighting, cut to length, bend to shape required, welding, including cranking, bending spirally or hooping providing spacers / chairs and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it, including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing and laying class 'A' old size brick (having crushing strength 75 Kg/cm²) work in cement mortar in CM 1:6 ( 1 cement : 6 coarse sand) in foundation and superstructure, walls, drains, manholes, chambers, ducts etc or any description of similar works, including necessary cutting of bricks as required , wastages, straight or curved, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for facias, kitchen platforms, vanity counters, window sills and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including cutting, rubbing, curing, moulding and polishing of edges to give high gloss finish, chamfering etc. complete at all levels; Area of slab over 0.50 sqm, joints amfered in turning point and pointing the joints with white cement (1:2) using marble dust or suitable filler with admixture of pigment to match with shade of granite etc. including cost of all materials, labours, scaffoldings, T & P, wastages etc. complete at all height as per specification, drawing and as directed by E.I.C.
Providing and fixing ISI marked flush door shutters to door frame (MS/ Wooden) 30 mm thick phenol formaldehyde bonded, core of block board construction conforming to IS : 2202 (Part I) of make Gee doors/Kit ply/ Swastik or other approved make as per EIC, non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges 125mm size with necessary screws all complete as per drawings & specification also provisions for door fittings, making holes/ cutting for fixing fittings, making good including labour, material, T&P, cartage, wastage etc all complete as per direction of EIC.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars, angle etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding, including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing and fixing aluminium tower bolts, 300 x 10 mm ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 )/ powder coated, transparent or dyed to required colour or shade, with necessary screws etc. complete, including labour, material, T&P, cartage, wastage etc all complete as per direction of EIC.
Providing and fixing aluminium sliding door bolts, ISI marked anodised /powder coated (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300 x16 mm, including , materials, labour, T&P etc, required for proper completion of the work etc including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing and fixing aluminium handles, ISI marked, anodised/ powder coated (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm , including , materials, labour, T&P etc, required for proper completion of the work etc including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868)/ powder coated transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper- including , materials, labour, T&P etc, required for proper completion of the work etc including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing, Fabricating & fixing of MS Structural steel work, Roof Truss (framed), trusses, purlins, crain, gantries, rails & fastnings and heavy bracket framing (beam, Tee, angle, channel, tubular , rectangular, square, flat, riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete etc all required sections including distance pieces, cleats, base plates, nut bolts, tie road, foundation bolt etc. at any height including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing and fixing factory made ISI marked steel glazed /sheet doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces or as directed as per site requirement to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete including , materials, labour, T&P etc, required for proper completion of the work etc including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 4.0 mm thick glass panes, including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing, rendering, dubbing out cement plastering 12 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on rough / fair faces of brick wall / concerete surface including plaster at all floors including jambs, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement including cost of all labours, materials, scaffolding and curing and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.
Providing & applying two coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved make & shade such as Asian/Berger/ICI to walls of any description at any height / depth nd of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litreincluding preparation of surface by sand papering, filling holes, cracks with birla putty stopping ,removing oil/smudge marks spreading and removing coverings, to doors, windows, floors,fittings, etc. to protect from splashes, removing and replacing furniture's, moveable cupboards,chicks, blinds, etc. washing floors, cleaning glass,joinery, leaving the premises clean neat and tidy including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing & applying two coats of ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance , weather resistant exterior paint of first quality of approved shade and make like apex of Asian /weather coat long life of Berger/weather shield/ max of ICI etc as approved by EIC, including one coat of Cement primer , preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, indows, fittings, floor, etc. to protect from splashes, removing & replacing oveable furnitures, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffoldingincluding all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Preparation of new / old surfaces two or more coats of Synthetic enamel paint of make and shade of Asian/ Berger/ Nerolac/ ICI or as approved, on steel/ wood/ plaster surface of any description etc. at any height, over a coat of suitable primer for respective surface primer of above brand including surface preparation, cleaning the dirt and other impurities, scrapping smooth and filling crevices with approved filler of approved brand, including cost of all material, labours,ladders/ scaffoldings, brushes, T&P etc. including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing and applying 01mm thick wall care putty(birla , JK or as approved ) on wall and ceiling for making surface smooth & even including preparation of surface by sand paper, wire brushing, washing down, filling holes, removal of nails etcincluding all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Above
HAL-AD/9904/4629/CE/24
Repair and maintenance civil works for installation of lift in A&T(I) building at HAL Factory Lucknow
Description
Name of the Individual / Firm / Company: * Mandatory
Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
Contact details
Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-
List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.
PAN No.:
Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.
Goods and Service Tax ID No.
SAC (Service Accounting code) along with the tax structure.
Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2022 of the previous financial year [ should not be less than 30% of Amount put to tender]
EMD of Rs.10000.00
Latest Solvency Certificate issued from Nationalized/ scheduled Bank issued and NOT before 12 months from the last date of Tender submission
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]
(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.
(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.
(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Details of person holding the power of Attorney (If different from contact person)
DECLARATION I
DECLARATION II
DECLARATION III
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT.pdf
TENDER_DOCUMENT • 0.78 MB
BOQ2.xlsm
TENDER_DOCUMENT • 0.03 MB
TECHNICAL_BID.pdf
TENDER_DOCUMENT • 1.90 MB
PQ.xlsx
TENDER_DOCUMENT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .