Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.7 LAccepted-AOC ATAL JI KI GALI SHINDE KI CHHAWANI LASHKAR GWALIOR MADHYA PRADESH 474009 | GWALIOR | MADHYA PRADESH | 474009 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹47.8 L+₹2.5 L (5.48%)Rejected-Finance 1ST FLOOR 100 FT ROAD NEAR HERO HONDA AGENCY OPP NARANG CHILDREN HOSPITAL BIBIWALA ROAD NORTH ESTATE | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹48.1 L+₹2.8 L (6.13%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹48.6 L+₹3.3 L (7.29%)Rejected-Finance AT SHRI RAMADHAR YADAV WEST ABHIYANTA NAGAR BAILEY ROAD DANAPUR PATNA BIHAR 801503 | DANAPUR | PATNA | BIHAR | 801503 | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹51.1 L+₹5.8 L (12.8%)Rejected-Finance KAGZI MOHALLA DANAPUR CANTT PATNA 801503 | PATNA | PATNA | BIHAR | 801503 | L5 | Rejected-Finance OTHER THAN LOWEST |
| Sl No | Description | Qty | Unit | ANAHITAS INFOSOLUTIONS PRIVATE LIMITED L4 | RAJ AND SONS L1 | jaglalchoudharyandsons L7 | SINHA CONSTRUCTION L5 | M/S Priya Trading Agency L2 | VAISHNAVI CONSTRUCTION L3 | HARINANDAN RAI SONS L6 | M/S SAROJ KUMAR SINGH L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L in replacement Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed. | 0.5 | Per Qtl | 9,500 ₹4,750 Lowest | 12,000 ₹6,000 | 11,000 ₹5,500 | 12,000 ₹6,000 | 12,500 ₹6,250 | 10,000 ₹5,000 | 11,655 ₹5,827.5 | 18,000 ₹9,000 |
| 2.00 | M&L in replacement 20mm dia stay rod including Stay assembly complete with accessories as shown in electrical plate No. 1 complete all as specified and as directed. | 1 | Each Set | 3,500 ₹3,500 | 2,000 ₹2,000 | 3,200 ₹3,200 | 4,002 ₹4,002 | 1,950 ₹1,950 Lowest | 3,000 ₹3,000 | 4,231 ₹4,231 | 5,000 ₹5,000 |
| 3.00 | M&L in replacement Loop type insulator, vitreous porcelain,white, brown or green Small size, with overall dimensions 65 x 90mm, clearance of hole 16mm complete all as specified and directed. | 1 | Each | 190 ₹190 | 150 ₹150 | 220 ₹220 | 300 ₹300 | 140 ₹140 Lowest | 200 ₹200 | 200 ₹200 | 400 ₹400 |
| 4.00 | Supply and fix in replacement cable jointing kit for 1.1 KV grade cable for straight through/termination joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 50 to 150 sqmm,Outdoor type complete all as specified and directed. | 1 | Each | 9,500 ₹9,500 | 8,000 ₹8,000 | 11,000 ₹11,000 | 9,520 ₹9,520 | 7,800 ₹7,800 Lowest | 10,000 ₹10,000 | 9,000 ₹9,000 | 12,000 ₹12,000 |
| 5.00 | Supply and fix in replacement cable jointing kit for 1.1 KV grade cable for straight through/termination joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 50 sqmm,Outdoor type complete all as specified and directed. | 1 | Each | 11,500 ₹11,500 | 8,000 ₹8,000 | 13,000 ₹13,000 | 10,000 ₹10,000 | 7,800 ₹7,800 Lowest | 12,000 ₹12,000 | 12,000 ₹12,000 | 15,000 ₹15,000 |
| 6.00Supply, laying, jointing & testing in replacemnt of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of following sizes complete all as specified and directed. | |||||||||||
| 6.01 | 3.5 core x 150 Sqmm | 150 | RM | 2,200 ₹3,30,000 | 1,900 ₹2,85,000 | 2,200 ₹3,30,000 | 1,822 ₹2,73,300 | 2,000 ₹3,00,000 | 2,100 ₹3,15,000 | 1,600 ₹2,40,000 Lowest | 2,900 ₹4,35,000 |
| 6.02 | 3.5 core x 95 Sqmm | 300 | RM | 1,578 ₹4,73,400 | 1,350 ₹4,05,000 | 1,600 ₹4,80,000 | 1,322 ₹3,96,600 | 1,320 ₹3,96,000 Lowest | 1,500 ₹4,50,000 | 1,400 ₹4,20,000 | 1,900 ₹5,70,000 |
| 6.03 | 3.5 core x 70 Sqmm | 150 | RM | 1,354 ₹2,03,100 | 1,100 ₹1,65,000 | 1,400 ₹2,10,000 | 1,000 ₹1,50,000 | 1,150 ₹1,72,500 | 1,300 ₹1,95,000 | 955 ₹1,43,250 Lowest | 1,600 ₹2,40,000 |
| 6.04 | 3.5 core x 50 Sqmm | 200 | RM | 879 ₹1,75,800 | 750 ₹1,50,000 | 900 ₹1,80,000 | 622 ₹1,24,400 Lowest | 760 ₹1,52,000 | 850 ₹1,70,000 | 666 ₹1,33,200 | 1,100 ₹2,20,000 |
Tender Value
₹42.8 L
EMD Value
₹85,520
Closing Date
10 Sept 2025, 6:00 pmClosed
GE Danapur
Danapur Cantt
SPECIAL REPAIR REPLACEMENT OF LT DISTRIBUTION SYSTEM SWITCH GEARS FOR MH AND CONNECTED AREA OF MH DANAPUR AND PROVN OF 85 X DESERT COOLER WITH STAND FOR TRG BN AGNIVEERS AT BRC DANAPUR UNDER GE DANAPUR CANTT
2025_MES_726623_1
CA NO GE DNR T49 OF 2025-26
Open Tender
Civil Works
Item Rate
180 days
Danapur Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Danapur
₹85,520
Yes
7 Oct 2025
19 Aug 2025
11 Sept 2025
19 Aug 2025
10 Sept 2025
2 Sept 2025
Amount
M&L in replacement Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.
M&L in replacement 20mm dia stay rod including Stay assembly complete with accessories as shown in electrical plate No. 1 complete all as specified and as directed.
M&L in replacement Loop type insulator, vitreous porcelain,white, brown or green Small size, with overall dimensions 65 x 90mm, clearance of hole 16mm complete all as specified and directed.
Supply and fix in replacement cable jointing kit for 1.1 KV grade cable for straight through/termination joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 50 to 150 sqmm,Outdoor type complete all as specified and directed.
Supply and fix in replacement cable jointing kit for 1.1 KV grade cable for straight through/termination joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 50 sqmm,Outdoor type complete all as specified and directed.
Supply, laying, jointing & testing in replacemnt of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of following sizes complete all as specified and directed.
3.5 core x 150 Sqmm
3.5 core x 95 Sqmm
3.5 core x 70 Sqmm
3.5 core x 50 Sqmm
3.5 core x 35 Sqmm
4 core x 10 Sqmm
Supply ,fabrication, installation and testing in replacemnt of LT Panel out door type factory made , water and vermin proof protection of suitable size made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 40 x 40 x 5 mm vertical frame and legs with mild steel flat iron 40 x 40 x 5 mm in horizontal sides of the frame with front and back side openable,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one complete all as specified and as directed. Note: Rate of earthwork and PCC work are deemed to be inclusive in this item.
INCOMMING
4 Pole MCCB 250 Amps , adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 36 KA breaking capacity including all fixing accessories with both ends spreader links -01 Nos
LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01 set (set of three) Make :- Legrand/L&T/Schneider.
OUTGOING
Copper strip busbar of 500 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 06 Nos
4 Pole MCCB 160 Amps , adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -03 Nos
4 Pole MCCB 100 Amps, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -03 No
LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -04 set (set of three) Make :- Legrand/L&T/Schneider.(For each O/G)
Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of JB for LT -01 No.
Supply, Installation, testing and Commissioning factory fabricated, out door type,LT FEEDER PILLAR BOX Double Door , Both side openable made out of 3.15 mm thick CRCA Sheet of size 07MX0.6mX0.35M with projected Globe roof for rain water protection duly treated through 8 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032 shade colour Dust and Vermin Proof, Double door with both side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System,including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeded with 50X50X6mm Mild Steel Angle Iron Frame and 600 mm above the Normal Ground Level comp -lete with internal connection with suitable size of cable ,cable lugs,and cable glands PCC Foundation in Cement Concrete 1:3:6 (20mm Graded Stone Aggregate) and Testing after Installation complete all as specified and comprising of the following :–
(a) Aluminium bas bar 400 amps - 04 Nos, supported with suitable size of heavy duty porcelain stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coaded (red, yellow and blue) for three phases and black for neutral. (b) MCCB 125 amps, 415 volt,25 KA Breaking capacity 4 pole Electromagnetic release duly connected to Bus Bar As IN COMING - 01 Nos
Excavation in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable and getting out in any type of soil complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.
M & L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable complete all as specified and directed. Note:- Punned thickness shall be measured and paid.
M & L for size sub class ‘B’ bricks, laid in trenches for protection of cable complete all as specified and directed.
M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate for foundation, filling and mass concrete complete all as specified and directed.
M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate for filling & foundation of pole & stay complete all as specified and directed.
M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate for coping of pole complete all as specified and directed.
Supply and fixing in replacement of GI tubing, light grade, 80 mm bore with all fitting laid in trenches / pole / wall for protection of cables complete all as specified and directed.
Supply and laying in replacement GI tubing light grade of size 40 mm for cable protection on road/drain/floor/pole including necessary clamps 40x4mm complete all as specified and directed.
M & L for horizontal boring mechanically across the existing road without disturbing the road surface for inserting 80/40 mm bore GI pipe all complete all as specified and as directed. Note :- GI pipe will be measured and paid under respective item of sch'A'.
Supply, stringing and fixing in replacement of Aluminium conductor steel reinforced (ACSR) OH conductor of any type including binding wire complete all as specified and directed.
S & F hot press moulded SMC junction / terminal box of size with internal diamensions of 200 x 140 x 95 mm with hinged door, incl provision of 4 way connector 415 Volts made out of polycarbonate or bakelite and 1 No MCB of 6 Amps with DIN bar, drilling holes for cable connections, connecting incoming and or out going cables by providing suitable of size of cable lugs/glands, fixied on pole by means of clamps made out of MS flat iron of size 25 mm x 3 mm including dismantling of old unserviceable all as specified and directed.
Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Supplying, erecting and fixing in replacement steel tubular swaged poles with cast iron base plate of size 300mm x 300mm x 6mm, finial taper plug, bolts, nuts & screws for type 410 SP-31 (9.0 mtrs long) including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to embedded portion in PCC and providing 3 Nos of 30cm wide circular bands with black & yellow paint starting from plinth level at a gap of 30 cm in between 2 bands and numbering of poles, in yellow paint over black painted back ground at a height of 2m from bottom of pole with 5 cm large bold letters 2" (inch) wide including taking down old unserviceable PCC poles of any type complete all as specified and directed. Note: Excavation, earth work, PCC in foundation and coping shall be measured and paid separately under relevant item of this schedule.
Supply & fixing in replacement of automatic street light switch using Nature Switch for automatic switching of street lights based on LUX level of natural light the sensor (nature switch) along with suitable power contactors and MCBs (Input-output) should be enclosed in pole/wall mountable enclosure made of rust proof, Electric shock proof, termite proof and FR grade SMC junction box (sintex make) conforming to IP 54.the contactor,MCBs and copper circuit wiring (min.10sqmm) should enough to take: Single-phase load of 5KW;contactor Rating 40Amps; MCB(sp) Rating 40Amps.
M&L for Advance Maintenance Free G.I. SAFE EARTHING Electrode with PIPE of not less than 50 mm outer dia( THICKNESS NOT LESS THAN -2.5MM) and two meter length, The electrode should be of galvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm 7.5 m. The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM).The GI electrode shall be surrounded with 25 kg BackFill compound to provide maximum contact between the electrode and Back Fill Compound. GI Electrode Shall be tested from CPRI.The earting pit should be cover with PCC 1:2:4 type B1 cover,of 450 x 450 mm complete all as specified and directed. Note : After completion earth resistance shall be recorded with earth megger and the record should be submitted to to department duly signed by contractor.
M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one 3 pin,5 Amp socket outlet on independent board , controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.
S & F for switch piano, flush type, 5 amps, single pole, one way, 230 volt complete all as specified and directed.
S & F for 2/3 pin, 5 Amp/ 6 Amp, socket outlet, flush type, 2 in 1 complete all as specified and directed.
M/S Priya Trading Agency (BID ID -3420904)
VAISHNAVI CONSTRUCTION (BID ID -3414968)
ANAHITAS INFOSOLUTIONS PRIVATE LIMITED (BID ID -3416903)
SINHA CONSTRUCTION (BID ID -3420189)
HARINANDAN RAI SONS (BID ID -3421153)
jaglalchoudharyandsons (BID ID -3420056)
M/S SAROJ KUMAR SINGH (BID ID -3419043)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .