85951 E8 PROVN OF DEFICIENT CEILING AND EXHAUST FANS IN SMQs OMQs AND MES KEY PERSONAL MARRIED QUARTERS IMPROVEMENT TO VARIOUS SERVANT QUARTERS AT AF STN MOUNT ABU

Amount

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) as levelling course.

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed cement mortar in CM 1:4 complete all as specified complete all as specified and directed

M&L for coloured printed Ceramic tiles area of each tile exceeding exc 0.18 sqm but n.exc 0.38 sqm in floors etc set and jointed with neat cement slurry pointed with colour cement to match the floor, and including 15 mm thick screed bed cement mortar in CM 1:4 complete all as specified

M&L for digital design glazed ceramic tiles in vertical surface of size of each tile 300 x 450 mm and 7 to 8 mm thick fixed to wall with 10 mm thik cement sand mortar in CM 1: 4 , set and joint in neat cement slurry and pointed in white or coloured cement to match the same complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, moulding on edge and polishing over and including 20mm thick screed bed in CM 1:4 complete all as directed by Engineer-in-Charge.

M&L for machine cut Kota stone slab 20 to 25 mm thick in skirting laid over cement plaster 15 mm in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D-2 (using 40mm grade stone aggregate) as in Sub floors,Sub bases ,flooring etc complete all as specified and directed.

M&L for chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry as in “foot paths” complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar or cement lime mortar complete all as specified and as directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brick wk with sub class 'B' old size bricks straight or curved on plan to any radius built in CM 1:4 as in half brick wall complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including crancking, bending spirally or hooping for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F TMT bars 5mm dia and over upto and including 10mm dia in stirrups, cut to length, bent to shape required including crancking, bending spirally or hooping for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) kitchen platform complete all as specified and as directed.

M&L for Formwork to edges of concrete flats, treads ,opening in concrete wall and side of RCC /PCC bands etc all as specified and directed by Engineer-in-Charge .

M&L for RCC (1:2:4) B0 type nominal mix using of 20 mm graded stone aggregate for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC (1:2:4) B0 type nominal mix using 12.5mm graded stone aggregate as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like complete all as specified and as directed.

M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types nd including 20mm thick screed bed in CM 1:4 complete all as directed by Engineer-in-Charge.

S&F for sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Taking down down cement plaster on brick or stone wall etc incl racking out joints hacking for key, scrubbing down with water etc.complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 surface finished even and smooth without using extra cement with water proofing compound complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately as supply and fix only.

Supply only integral water proofing compound ISI marked complete all as specified and directed.

M&L for 5mm thick cement plaster in CM 1:3 for ceiling finished even & smooth without using extra cement on concrete surface.

M&L for preparing of new surfaces of any description and applying two coats of oil bound distempering walls over a coat of Priming plastered and other surfaces with alkali resistant and thin layer of wall care putty on plastered surfaces, complete all as specified and as directed.

M&L for preparing of new surfaces of any description and applying two coats of cement base paint coloured or tinted over a coat of priming plastred and other surfaces with alkali resistance priming paint on walls complete all as specified and as directed.

M&L for new surface of ceiling by scrapping and washing including preparation of surface by applying three coat of white washing all as specified and as directed.

M&L for preparing old decorative surfaces of any description and applying two coats of white washing on ceiling.

M&L for two coat of oil bound distemper over a coat of primer over thin layer putty on old decorative cement painted walls , pillasters, cornices, etc including necessary preparation of surfaces by washing rubbing down and stopping all as specified and as directed.

M&L for two coat of cement base paint over a coat of alkali resist primer over on old decorative cement painted walls , pillasters, cornices, etc including necessary preparation of surfaces by washing rubbing down and stopping all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 & n.exc. 4 sqm in each complete all as specified & directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mmmade out of 5 mm thick plain colour, PVC sheet reinforced with MS square tube complete all as specified.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tube for top & bottom rails. M.S. frame shall be covered with heat mouleded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixed in the frame at site as per specification clause No.8B.1 to 8B.10 and drawing on page No. 146 of MES SSR-2020 Part-II complete all as specified.

S&F stainless steel butt hinges 100 mm long, for PVC door complete all as specified and directed.

S&F aluminium handles 125 mm long cast type, anodised complete all as specified and directed.

S&F aluminium anodised barrel tower bolts 150 mm long of extrude section and fixed complete all as specified and directed.

Taking down chowkhats or frame n exc 1.50 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F for powder coating min thick ness of powder coating 50micron aluminium frame for doors, windows,ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F for poweder coating min thick ness of powder coating 50micron aluminium windows and ventilators , fixed type without sash bars ,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading ,screwa etc complete all as specified and as directed.

S&F for poweder coating min thick ness of powder coating 50micron aluminium windows and ventilators, side hung type without sash bars ,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading screws anodised aluminium fittings such as peg stays 150mm long(1 No), hinges type B12 100mm long(2 No) suiltable handle (1 No) complete all as specified and as directed.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F 5.5mm thick Sheet glass, ordanary quality and glazing with oil putty in square n exc 0.5 sqm in each pane bracket guard and railing complete all as specified and as directed.

Supply and fixing 3 mm thick Figured glass,pin head type and glazing with oil putty, in square not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

Supply and fixing aluminium fancy type deco grill powder coated 4-5mm thick fixed to firmly aluminium sections, approved by Engineer - in charge .Note:- Necessry cleats/ any type channels etc can be paid and measured separately. Complete all as specified and as directed.

Taking down shutters of any descrption exc 1 sqm but n.exc 2 sqm each as directed.

S&F mild steel framed work as in door chowkats , shutters of angles or other section with gusset plates, rails, braces etc complete drilling welding for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges for steel door fittings (exclusive of steel sheeting or other covering running rails or guides) and hanging also fastening and fixing complete ((Fe-290-Gde-165) all as specified and directed

S&F 30 mm thick, 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as specified and directed.

S&F 35 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc (without sash bars) fitted with cut and mitred securing beads for securing glass etc complete as specified and directed sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a).

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Aluminium alloy anodised sliding door bolt with hasp & staple ( bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed.

S&F 150 mm aluminium anodised hasp and staple complete all as specified and directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm size, Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

M&L preparing new wood & wood based surfaces and applying two coats of synthetic enamel paint over a coat of pink primer, exc 10 cm width or girth complete as specified.

M&L preparation of old painted surfaces of wood/steel and applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F of Harrison rails (Curtain rails) of anodised aluminium alloy chromium with fixing brackets stops, rollers etc complete all as specified and as directed.

Dismantling existing tanks exc 500 but not exc 1000 ltr capacity, removing to store all as specified and as directed.

S&F 500 Ltrs capacity rotational moulded polyethylene storage tanks (cylindrical vertical with closed top Three layer white colour ) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 liters including all accessories complete all as specified.

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20 mm bore size (minimum weight 455 gms) complete all as specified and as directed.

S&F 20 mm dia Gun metal gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified & as directed.

Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified & as directed.

S&F 15 mm dia galvanised steel (GI) tubing medium grade with all fittings and fixed to walls and ceiling concealed pipe work or laid in floors complete all as specified and directed.

S&F 20 mm dia galvanised steel (GI) tubing medium grade with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Refixing old steel GI tubing 15 mm dia obtained from item No.67 in new or old position, etc all as directed.

Refixing old steel GI tubing 20 mm dia obtained from item No.68 in new or old position, etc all as directed.

Cutting Existing steel tubing in position without taking down, 20mm bore of pipe for alterations or additions (each cut measured ) Complete all as specified and directed

S&F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 630 x 450 mm, white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications as specified.

S&F in repair PVC valveless, syphonic action type, flushing cistern 10ltrs capacity, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, excluding 32 mm dia. PVC flushing pipe,complete all as specified.

M&L for Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

Supply & Fixing Vitreous China wash basin (WHB), white, flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets and making good the damaged portion of wall or floor complete all as specified and directed.

Supply only PVC connection 15mm dia 600 mm long with brass fly nut at both ends complete all as specified and directed.

S&F Towel rail 600mm long of brass chromium plated tubular rail 20mm dia D type between flange fixed with including chromium plated brass screws and wooden plastic cleats complete all as specified and as directed.

S&F in repair 125mm dia brass chromium plated over head jet shower rose with arm and wall flange including fixing to steel pipe or union complete all as specified and directed.

S&F in repair pillar taps , cast copper alloy with capstan heads , chromium plated , screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm complete all as specified.

S&F in repair 15 mm bore bib taps, chromium plated cast copper alloy, high pressure screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair concealed stop valve chromium plated, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified.

S&F Waste coupling suitable for 32mm dia bore of discharge pipe of PTMT (half or full threated) for WHB minium weight 45 gms complete all as specified and directed.

S&F Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggreate complete all as specified and directed.

S&F in repair grating doom 100 mm dia of PTMT (minimum weight 25gms ) complete all as specified and directed.

S&F PVC 75 mm dia floor trap plain with grating including jointing with solvent cement complete all as specified and directed

S&F in Repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints laid in trenches complete all as specified and directed

M&L 110 mm cement concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate including necessary shuttering and supports complete all as specified.

S&F PVC (SWR) bends 110mm dia any radius complete all as specified and directed.

S&F PVC (SWR) junction single, equal or unequal 110mm dia complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints laid in trenches complete all as specified and directed.

S&F 75 mm PVC (SWR) bends any radius complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required internal dia of pipe 100mm complete all as specified and directed.

Excavation in post holes in soft/disintegrated rock each n exc 0.50cum getting out,returning in and ramming earth or broken rubble mixed with earth around in layer not exc 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B1 (20mm graded aggregate ) as in wall or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundry pillars and posts and mass concrete complete all as specified and directed.

S&F for steel work in tubular tresses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1998. St -240 complete all as specified and directed.

S&F Fe 410W (Gde E-250) quality A for Roof truses (framed), trussed, purlins, crane grantries, rails and fasternings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, clests etc.

S&F Fe 410W (Gde E-250) quality A for mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment to bottom and top of pipe complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces of any description, not otherwise described over 10cm width or grith after preparation complete.

S&F for Pre painted galvalume aluminium zinc coating GI based coorugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F for Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

Taking down carefully copper/aluminum point wiring (Light/ fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc, stacking at site for reuse or removing materials to store for keeping in for taking credit and making good the disturbed surfaces / walls/ floors etc.

Point wiring with 1.5 Sq. mm (nominal area), multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including 1.5 Sq. mm (nominal area) PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly, drawin in and including rigid non metallic PVC heavy duty concealed conduit, GI terminal boxes 1.2mm thick fixed flush to wall surface, covered with & including 3 mm thick plastic laminated sheet top cover for mounting switch and sockets etc. complete all as specified and directed for following : - (a) One light point/exhaust fan point controlled by one switch or one ceiling fan point controlled by one switch & fan regulator etc.

(b) One socket outlet three pin, 5/6 Amp, on the same board complete all as specified.

(c) One socket outlet three pin, 5/6 Amp, on the Independant board complete all as specified.

S&F Ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified.

S&F Switch piano, flush type, single pole, one way, 6 Amp complete all as specified.

S&F Socket outlet 2/3 pin, 2-in-1, 5/6 Amp, flush type complete all as specified.

S&F Switch-socket combination outlet, 2/3 pin, 2-in-1, 5/6 Amp, flush type complete all as specified.

All same as per item ser No 103 here-in-above but wiring using 2.5 sqmm (nominal area) multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including 2.5 Sq. mm (nominal area) PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly for 6 pin, 15/16 Amps socket outlet on independant board complete all as specified and directed.

Switch Socket combination 6 pin, 6/16 Amp, flush type, fixed on plastic laminated sheet top cover complete all as specified.

S&F ceiling fans, 1200mm sweep, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor and making connection from ceiling rose or connector to fan complete all as specified. NOTE:The length of suspension rod shall be as per site requirement.

S&F Fan regulator, stepped type, electronic type, heavy duty, flush type 230V AC.complete all as specified.

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers and connecting up including provision of flexible PVC conduit from ceiling rose or connector to fan complete all as specified.

M&L for Sub main wiring with 2 runs of 2.5 Sq.mm main cable alongwith one run of single core 2.5 Sq.mm for continuous earth wire (with approved colour coding as per IS), single core FRLS PVC insulated flexible multistranded copper conductor 1.1 KV grade drawn through & including PVC grey conduit with necessary accessories (like bend, juction boxes etc) complete all as specified.

S&F LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

S&F LED Bulb, 12 Watt complete all as specified.

S&F Lamp holder, Angle type, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.

M/s B. S. Solanki Builders