NIT NO.5(M-6)ITEM NO.9

Dismantling of existing old Pump-sets from the M.S base frame and valves, Bends, pipes etc. of both side (suction & delivery side) and panel with all accessories by doing all such work as per site requirement & taking out all the equipments from the base frame/foundation. The job also includes Removing of rusted base frame from the RCC foundation by cutting with gas cutter etc., breaking of foundation and fixing of dead flanges in suction line by welding etc. by taking all precautions as per site requirement.

Dismantling of old /existing starter panel, Kit-kat, changeover switches etc. from site after disconnecting the main incoming & out going electric supply by taking all precautions at site.

S/O MS Pipe Confirming to IS:1239 Part-I, Medium class 100 mm diameter. Make: Jindal/ Tata.

S/O MS Pipe Confirming to IS:1239 Part-I, Medium class 80 mm diameter. Make: Jindal/ Tata.

S/O of 100 mm dia M.S. Flange.

S/O of 80 mm dia. M.S. Flange.

Supply of MS Bend heavy duty of size 100 mm dia. 90*with double flange.

Supply of neoprene rubber packing sheet.

S/O Nut Bolt& Washers of suitable size of good quality as per site requirement.

S/O of 100 mm dia. PN 1.0 Sluice Valve. Make: KBL/IVC/DJB approved make.

S/O of 80 mm dia. PN 1.0 Sluice Valve. Make: KBL/IVC/DJB approved make.

S/O of 80 mm dia. PN 1.0 Non-Return Valve. Make: KBL/IVC/ DJB approved make.

Supply of Mono block pump-set of 20 HP capacity with Head: 30 Mtr, Discharge: 30 LPS approx, Suction-delivery(100x80mm).Make- Kirloskar/Wilo/CG/DJB Approved Make.

S/O Fully Automatic Star-Delta Starter/controller with single phase preventer, ML contactor, MN5 Relay, wideband Coil, Relay range (30-50A) working at rating 3Ø, 415V, 50HZ Suitable for upto 30 HP. Make: L&T

S/O 3-Core PVC insulated and FR PVC Round sheathed, Copper Submersible cable of 16 Sq. mm working voltage up-to 1100 volts in 100 mtr length. Make: Finolex/Havells/DJB Approved make.

Cleaning of garbage and Breaking of existing damaged floor and removing the dust, soil etc. Providing and fixing at or suction line level precast Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, Plastering of floor as per site requirement and direction of Engineer-in-charge.

Re-casting/strengthening of RCC foundation, plastering and making wet layer of cement of the foundation i/c. Shuttering etc. as required. Making / fabrication and supply of MS base frame/angle suitable for mono-block pump set. Grouting the foundation nut-bolts, Drilling/ machining and painting as per site requirement or direction of engineer-in-charge ( As per sample)

S/o pressure gauge 80mm dia. having required range with accessories such as GI fitting bib cock etc required to complete the work. Make:-Feibig/H-Guru/Approved by DJB

Loading, Unloading, Cartage and Transportation charges for taking all dismantled equipments from site to store and new equipments at site including charges of heavy labour etc. as per requirement.

Installation and Fitting of above Pumps & Motors on the Base-Frame/Foundation. The job also includes installation & fixing of Valves, pipes, Bends, Reducers, Flanges etc. of both side (suction & delivery side) including primer & paint on complete equipments as per the site requirement & proper-alignment of pump-sets after taking all safety precaution arrangements, all Tools & Tackles etc including painting of all E&M equipments. The work shall be completed on turn-key basis and job also includes testing of Pump-sets on full load condition as per site requirement.

HYDROCON ENGINEERS