Construction of Sanitary Inspector , Sanitary Supervisor Office, Labours Waiting Shed Toilet, Toilet Footpath, RO Water Arrangements and other basic ammenities for SI Ward Office at Saradamil road OHT Building in Ward No.96, South Zone.

Amount

Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds of rock and boulders exceeding 0.014 c.u.m. in volume including rough dressing and dumping the excavated materials away from work site manually within 50m initial lead and 2m initial lift as per the direction of Engineer-in-charge.

Supplying and filling in foundation and basementwithWell Gravel in layersofnotmorethan15cmthickwell rammedwateredandcompacted etc., complete complying with standard specification

Cement concrete 1:4:8 (one cement, four sand and Eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted, etc., complete complying with standard specification.

Random rubble masonry in cement motor 1:5 (one Part of cement, Five partofCrushedStoneSand(M-Sand)) mixusingallgranitestonesandbondstones for foundationandbasement fromapproved quarryincludingwatering,curing,andlabour charges etc., completed as per standard specification

Centering with steel plates for sides & soffits etc. complete.

Supplying and erecting centering for sides and soffits including supports and strutting for plain surfaces such as reinforced cement concrete slabs, walls etc., complete

Reinforced Cement concrete 1:1.5 :3 (one cement, one & half M.sand and three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Supplying, fabrication and placing in position of steel reinforcement using mild steel of Ribbed tor steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wore and all labour charges for cutting, bending & tying etc., complying with standard specifications - 1 Quintal

Plain cement concrete 1:2:4 mix (One cement two M.Sand and four aggregate) using 20mm size ISS gauge HBBG metal including mixing, laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification - 1 m3 (detailed data for 10 m3 )

Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm(83/4"x41/4"x23/4") includingcostofmaterialsand labour charges etc., as per standard specification - 1m3

Plastering with cement mortar1:5 (OnepartofCementandFivepartof PlasteringSand(P-Sand))12mm, thick inall floors includingcost and conveyanceof allmaterilas tositeand labour chargesetc,completeas per standard specifications

Supplying Mild Steel Grills for windows, ventilators, etc., including priming coat

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materialsshouldbeofPPGItileprofile witharedcolour or anyother approved design0.47mmthick24guagehavingwidth 1050mm.ThesheetshouldbeG.I.basepre paintedhotdippedgalvanizedironsheetand tobe fixedwithshelf tappingscrews,plastic washer.Thewasher andscrews tobe fixed byusingminutepowermachinedrilledwith outdamagingthesheetspaintcoatingtobe regular modified polyster coat with zinc coating of Z 120GSMpaint thickness the finish should be terra cotta finish like malabarmangaloretiles finishoptionalmatt finish. The sheet to be fixedwithmaking suitable corrugated,cutting the sheet in to the required ssize and making ornamental

9.StuccoPlastering12mmthick using bluegranitechipsofsize10mmandbelow over abaseplasteringwith cementmortar 1:5 (Onepart of Cement andFive part of Plastering Sand (P- Sand)), 12mm thick,including cost and conveyance of all materials to site etc,complete as per

10.UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Painting with plastic emulsion paint in two coats over a base coat of Primer in approved colour and quality etc., complete.

Filling with Quary Rubbish in Layer by Layer including Watering and Consolidation and all labour charges for Spreading as per the Direction of the Departmental officers Etc, Complete

Providing and laying of Rubber Moulded Hydraulic Pressed Paver Block size 83mm thick to be laid in lorrying bone pattern with approved non sticking surface in the top and the rate including leveling the base, preparation of sub base with sand cushion 100mm thick, laying out the pavement, cut the pieces to fit the edge, vibrating the pavers, sweeping the sand grouting, providing transporting, loading unloading and laying of paver block as per standard specification.

Supplying and fixing of HDPE Water Tank with suitable specials including cost of materials to site and all other labour charges.etc

Supplying and Fixing of Indian make WHITE WATER CLOSET of size 580mm x 440mm with 'P' Trap and foot rest and Filling allround the closet using 20mm broken brick jelly including fixing in position and levelling etc., complete

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum?Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20 Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.

Wiring with 2x15 Sq.mm (22/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A.F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour PVC concealed light or fan point.

Supply and fixing of 1200mm (48") AC ceilling fan complete with stepped electronic 300W regulator with 1.1 meter down rod on the existing clamp

Supply and Fixing of 4' 20W LED tube light fitting of approved brand including labour charges for fixing in wall and ceiling with necessaey accessories like clips,screw etc complete

Supply and Fixing of Street light of 48W LED Bulb of approved brand and quality with required materials like pipe, clamp etc

Supply and run off 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed CU conductor of 1100V grade in rigid PVC pipe concealed in wall and ceilling with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour

Supply and run off 2x4 sq.mm (56/0.3) PVC insulated SC unsheathed CU conductor of 1100V grade in rigid PVC pipe concealed in wall and ceilling with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour

Wiring with 2x15 Sq.mm (22/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 150mm x100mmx113mm TW switch box with 3mm thick hylum sheet cover for 5A.3PIn non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour for concealed PVC plug point.

Supply and Fixing of Lipped Mouth Porcelin Flat Back Urinal Tub with all accessories such as 32mm dia Bell Mouth PVC Connection , 15mm dia GM wheel Valve,15mm dia 'B' Class GI Waste Water Pipe 15mm dia nylon connection, 15mm dia Brass nipple Etc., complete (White)

sirpi infrastructure (BID ID -1543613)