Loading…
Loading…
Tender Value
₹2.7 Cr
EMD Value
₹5.5 L
Closing Date
26 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
45 days
Expenditure
Capital (Works)
ENGG.
16 conditions · 5 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less: where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar nature of work for Engineering work is defined as "Any civil engineering work involving construction of building and /or construction bridge/ FOB"
Regarding technical and financial eligibility criteria, scanned copies of supportive documents/certificates from competent officials are to be submitted along with their offer.
Scanned copies of documents in support of formation/registration of the company/firm/legal authorization of the person to deal with the tender/notarized/registered copies of the documents wherever required as per tender conditions are to be submitted along with offer.
(a)The tenderer must have successfully completed/substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed/substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works , each costing not less than the amount equal to 40% of advertised value of each component of tender, or a One similar work, each costing not less than the amount equal to 60% of advertised value of each component of tender
8 conditions · 2 needing a document upload
If the tenderers deliberately gives/give wrong information in his/their tender or creates/create circumstances for the acceptance of his/their tender, the Railway reserves the right to reject such tender at any stage
The tenderers shall keep the offer open for a minimum period as mentioned in NIT from the date of opening of the tender, within which period the tenderers can not withdraw their offer, subject to the period being extended further if required, by mutual agreement from time to time. Any intervention of the above condition will make the tenderer liable for forfeiture of his security deposit for due performance of the foregoing stipulation
The quantities shown in above Schedule are approximate and are as a guide to give the tenderer(s) an idea of quantum of work involved. The Railway reserves the right to increase/decrease and/or delete or include any of the quantities given above and no extra rate will be allowed on this account
All the bidders/tenders should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall posses valid Electrical Contractor License (issued by Govt. Electrical Licensing Board). If the tenderer does not posses valid Electrical Contractor License themselves, they shall execute the electrical portion of the work under supervision of competent person having valid Electrical Contractor License. In case the electrical portion of the work is being executed under supervision of competent person having valid electrical Contractor License, copy of the valid Electrical license should be submitted to CPM/GSU/Ajmer by the main contractor before commencement of Electrical portion of the work. Note: The submitted/uploaded license must be valid on the date of tender opening to consider as eligible offer
A statement showing construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender) taking into account the completed as well as work in progress as per Annexure-VI of tender form ( Second Sheet ) of IRGCC-2022 on the letter head of Chartered Accountant, to evaluate bid capacity of the tenderer (Mandatory for tender value more than Rs. 10 Crores). In case of JV firm details of construction works executed by each member of JV is required to be submitted.
Construction of Platform, Surfacing work, Water booths and other misc. works ( including Electric General work ) in c/w Conversion of Platform no-2 into island platform at Daurai station and extension of it towards Saradhna end of Ajmer Division.
GSUAII-DOZ-PH53-2026
GSUAII-DOZ-PH53-2026
Open
Works - General
12 Months
Ajmer, Rajasthan
₹0
₹5.5 L
26 May 2026
4 May 2026
12 May 2026
99 items across 9 schedules · ₹42,21,245.7 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | cum | 400 | 494.1 | 1,97,640 |
| 2 | All kinds of soil | cum | 850 | 177.5 | 1,50,875 |
| 3 | All kinds of soil. | cum | 36 | 260.3 | 9,370.8 |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 220 | 196 | 43,120 |
| 5 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 70 | 700.5 | 49,035 |
| 6 | All kinds of soil | cum | 30 | 126.8 | 3,804 |
| 7 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 601 | 7,294.7 | 43,84,114.7 |
| 8 | 1:1 1/2:3 (1 cement : 1 1/2 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 3 | 10,357.55 | 31,072.65 |
| 9 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 1 | 10,852.95 | 10,852.95 |
| 10 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 6 | 927.25 | 5,563.5 |
| 11 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 40 | 107.85 | 4,314 |
| 12 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 80 | 107.85 | 8,628 |
| 13 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 2 | 9,504.75 | 19,009.5 |
| 14 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 24 | 9,095.05 | 2,18,281.2 |
| 15 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 750 | 7,311.25 | 54,83,437.5 |
| 16 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 20 | 9,275.45 | 1,85,509 |
| 17 | Area of slab upto 0.50 sqm | Sqm | 16 | 5,413.5 | 86,616 |
| 18 | Area of slab over 0.50 sqm | Sqm | 16 | 5,136.3 | 82,180.8 |
| 19 | Granite work | Metre | 20 | 510.95 | 10,219 |
| 20 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 500 | 172.6 | 86,300 |
| 21 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 60 | 772.4 | 46,344 |
| 22 | Dark shade pigment using ordinary cement | Sqm | 380 | 1,119.5 | 4,25,410 |
| 23 | 25 mm thick | Sqm | 4500 | 1,948.25 | 87,67,125 |
| 24 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | Sqm | 8 | 3,186.7 | 25,493.6 |
| 25 | 1:6 (1 cement: 6 fine sand) | Sqm | 50 | 383 | 19,150 |
| 26 | 1:6 (1 cement: 6 fine sand) | Sqm | 580 | 450 | 2,61,000 |
| 27 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 520 | 116.9 | 60,788 |
| 28 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works | Sqm | 30 | 67.4 | 2,022 |
| 29 | Two or more coats on new work | Sqm | 30 | 155.9 | 4,677 |
| 30 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 150 | 2,434.25 | 3,65,137.5 |
| 31 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 5 | 3,551.25 | 17,756.25 |
| 32 | In cement mortar | cum | 30 | 2,458.95 | 73,768.5 |
| 33 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | Kg | 1500 | 5.65 | 8,475 |
| 34 | For thickness of tiles above 25 mm and up to 40 mm | Sqm | 1500 | 113.35 | 1,70,025 |
| 35 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in- charge. (The panel shuttering work shall be paid for separately). | cum | 20 | 9,823.8 | 1,96,476 |
| 36 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge. | Sqm | 190 | 2,017.6 | 3,83,344 |
| 37 | 20 mm nominal dia Pipes | Metre | 50 | 335 | 16,750 |
| 38 | 25 mm nominal dia Pipes | Metre | 30 | 401.55 | 12,046.5 |
| 39 | 20 mm nominal dia Pipes | Metre | 50 | 274.3 | 13,715 |
| 40 | 25 mm nominal dia Pipes | Metre | 20 | 355.4 | 7,108 |
| 41 | 50 mm nominal dia Pipes | Metre | 50 | 794.25 | 39,712.5 |
| 42 | 15 mm nominal bore | Each | 10 | 353.25 | 3,532.5 |
| 43 | 15 mm nominal bore | Each | 2 | 353.25 | 706.5 |
| 44 | 20 mm nominal bore | Each | 4 | 379.2 | 1,516.8 |
| 45 | 15 mm nominal bore | Each | 2 | 406.85 | 813.7 |
| 46 | 25 mm nominal bore | Each | 2 | 464.05 | 928.1 |
| 47 | 15 mm nominal bore | Each | 2 | 329.3 | 658.6 |
| 48 | 15 mm nominal bore | Each | 2 | 506.8 | 1,013.6 |
| 49 | 15 mm nominal bore | Each | 2 | 670.45 | 1,340.9 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ELECTRICALSCHEDULEANDSPECIFICATION.pdf
ATTACHMENT
TenderDocumentFinal.pdf
ATTACHMENT
safetyatworkssite.pdf
ATTACHMENT
SystemofVerificationofTenderersCredentialsdated05.09.2023.pdf
ATTACHMENT
GCC-2022-ACS10.pdf
ATTACHMENT
GCCACS114.pdf
ATTACHMENT
Nodeploymentofengineer.pdf
ATTACHMENT
procedureofdigginginvivnityofstcable1.pdf
ATTACHMENT
ProcedureorderforMeasurementTestChecklimitMaterialpassing.pdf PSSA test Check Letter
ATTACHMENT
ProcedureorderforMeasurementTestChecklimitMaterialpassing.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .