Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹20.9 Cr 2 YOUR TENDER SUBMITTED ON 17 05 2025 ON E TENDER WEBSITE 3 YOUR PRICE BID OPENED ON 29 05 2025 ON E TENDER WEBSITE SIR THIS IS TO NOTIFY YOU THAT YOUR TENDER FOR THE WORK UNDER REFERENCE HAS BEEN | ₹20.9 Cr |
Tender Value
₹24.7 Cr
EMD Value
₹24.7 L
Closing Date
19 May 2025, 11:00 amClosed
Development of Residential Complex/Family Quarters at Barsua Iron Mines and Kalta Iron Mines of SAIL, RSP, Odisha
NBCC/SBG/ODISHA/NIT/25-26/019
NBCC/SBG/ODISHA/NIT/25-26/019
Open Tender-Domestic
Civil Works General
Dhenkanal, Odisha
₹11,800
₹24.7 L
25 Apr 2025
25 Apr 2025
19 May 2025
19 May 2025
29 May 2025
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
SH-1 EARTH WORK
2.6 Earth work in Excavation by mechanical means (Hydraulic
excavator)/manualmeans over areas (exceeding 30 cm in depth, 1.5 m in width
as well as 10sqm on plan) including getting out and disposal of excavated earth
lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20cm in depth, consolidating each
deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
2.25(a) Excavating, supplying and filling of local earth (including royalty) by mechanical
transport upto a lead of 5km also including ramming and watering of the earth
in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc.
2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / banking
excavated or stacked materials.
2.27 Supplying and filling in plinth with Jamuna sand or Equivalent sand under floors
including watering, ramming, consolidating and dressing complete
2.32 Clearing grass and removal of the rubbish up to a distance of 50 m outside the
periphery of the area cleared.
2.34 Supplying chemical emulsion in sealed containers including delivery as
2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Litr 228.42 1117.50 255259.41
2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-
termite treatment (excluding the cost of chemical emulsion) :
2.35.3 Treatment of soil under existing floors using chemical emulsion @ one litre per
hole, 300 mm apart including drilling 12 mm diameter holes and plugging with
cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
2.35.3.1 With Chlorpyriphos E.C. 20% with 1% Sqm 301.69 2980.00 899035.06
TOTAL EARTH WORK 3172756.91 0
SH-2 CONCRETE WORKS
4.1 Providing and laying in position cement concrete of specified grade excluding
the cost of centering and shuttering - All work up to plinth level :
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8
graded stone aggregate 40 mm nominal size derived from natural sources)
4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3
coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate
20 mm nominal size derived from natural sources) over 75mm thick bed of dry
brick ballast 40 mm nominal size, well rammed and consolidated and grouted
with fine sand, including necessary excavation, levelling & dressing & finishing
the top smooth.
TOTAL (Carried Over to Summary of Civil Works) 3971198.63 0
SH-3 REINFORCED CEMENT CONCRETE WORK
5.9 Centering and shuttering including strutting, propping etc. and removal of form
5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 381.58 1231.20 469796.15
5.9.20 Suspended floors, roofs, landings, balconies and access platform. Sqm 1000.67 3740.00 3742504.23
5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 716.54 4800.35 3439658.39
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 935.38 7064.01 6607525.95
5.9.7 Stairs, (excluding landings) except spiral-staircases. Sqm 744.32 900.00 669891.07
5.9.19 Weather shade, Chajjas, corbels etc., including edges Sqm 925.45 538.78 498612.38
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
5.3 Reinforced cement concrete work in beams, suspended floors, roofs having
slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain
window sills, staircases and spiral stair cases above plinth level up to floor five
level, excluding the cost of centering, shuttering, finishing and reinforcement Cum 11195.26 16.13 180557.13
with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size derived from natural
5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing
in position and binding all complete upto plinth
5.22.6 Thermo-Mechanically Treated bars. kg 104.94 101945.93 10698395.53
5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.
5.22.A Thermo-Mechanically Treated bars. kg 104.94 210228.54 22061775.12
5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C.
5.33 Providing and laying in position machine batched and machine mixed design
mix M-25 grade cement concrete for reinforced cement concrete work, using
cement content as per approved design mix, including pumping of concrete to
site of laying but excluding the cost of centering, shuttering, finishing and
reinforcement, including admixtures in recommended proportions as per IS:
9103 to accelerate, retard setting of concrete, improve workability without
impairing strength and durability as per direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 kg/Cum. Excess/less
cement used as per design mix is payable/recoverable separately).
5.33.1 All works upto plinth level
5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum Cum 9395.34 803.32 7547439.17
5.33.2.2 All works above plinth level upto floor V level Cum 9741.40 1497.26 14585385.65
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
5.35 Add for using extra cement in the items of design mix over and above the
specified cement content therein.
TOTAL (Carried Over to Summary of Civil Works) 71169833.64 0
SH-4 BRICK WORK
6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6939.93 374.68 2600279.93
6.38 Providing and laying autoclaved aerated cement blocks masonry with 100 mm
thick AAC blocks in super structure above plinth level up to floor V level in
cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing Cum 9920.53 254.23 2522117.08
and placing in position 2 Nos 6 mm dia M.S. bars at every third course of
6.34 Brick work with non modular fly ash bricks conforming to IS:12894, class
designation 10 average compressive strength in super structure above plinth
level up to floor V level in :
6.34.2 Cement mortar 1:6 (1 cement : 6 Coarse sand) Cum 8516.54 2846.53 24242581.76
TOTAL (Carried Over to Summary of Civil Works) 29364978.76 0
SH-5 MARBLE & GRANITE WORK
8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded
and prepolished, machine cut for kitchen platforms, vanitycounters, window
sills, facias and similar locations of required size,approved shade, colour and
texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse
sand), joints treated with white cement,mixed with matching pigment, epoxy
touch ups, including rubbing, curing,moulding and polishing to edges to give
high gloss finish etc. completeat all levels.
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
8.2.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble
8.2.1.2 Area of slab above. 0.50 sqm Sqm 2995.39 148.80 445714.34
8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc.,
including machine polishing to edge to give high gloss finish etc.complete as
per design approved by Engineer-in-Charge.
8.4 Extra for fixing marble /granite stone, over and above corresponding basic
item, in facia and drops of width upto 150 mm with epoxy resin based R.m 553.22 248.00 137198.38
adhesive, including cleaning etc. complete.
8.5 Extra for providing opening of required size & shape for wash basins / kitchens
sink in kitchen platform, vanity counters and similar location in marble /
Granite /stone work including necessary holes for pillar taps etc. including
moulding, rubbing and polishing of cut edges etc. complete.
TOTAL (Carried Over to Summary of Civil Works) 782396.26 0.00
SH-6 WOOD AND P.V.C. WORK
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
26.86 Providing and fixing factory made single extruded WPC (Wood Polymer
Composite) solid door/window/clerestory windows & desertory other
Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60
(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice
husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for
100 gms) fabricated with miter joints after applying PVC solvent cement and
screwed with full body threaded star headed SS screws having minimum frame
density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N
(Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity
900 N/mm2 and resistance to spread of flame of Class A category with property
of being termite/borer proof, water/moisture proof and fire retardant and fixed
in position with M.S hold fast/lugs/SS dash fasteners of required dia and length
complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS
dash fasteners shall be paid for separately).
26.88 Providing and fixing factory made single extruded WPC (Wood
Polymer Composite) solid decorative type flush door shutter of required size
comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium
carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non
toxic additives (maximum toxicity index of 12 for 100 gms) having minimum
density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) & 900
minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2
and resistance to spread of flame of Class A category with property of being
termite/borer proof, water/moisture proof and fire retardant. WPC to be
laminated with PVC foil of minimum 14 microns thick of approved design
pasted with hot melt adhesive on both faces of shutter and fixing with stainless
steel butt hinges of required size with necessary full body threaded star headed
counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note:
stainless steel butt hinges and necessary S.S screws shall be paid separately)
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
14.4 Providing and fixing chromium plated brass butt hinges with necessary
chromium plated brass screws etc. complete.
9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with
10 mm diameter bolts, nuts and wooden plugs and embedding in cement
concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded
stone aggregate 20mm nominal size).
9.62 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and
screws etc. complete
9.74 Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete :
9.66 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992
with necessary screws etc. complete :
9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc.
with M.S. flats, square or round bars etc. including priming coat with approved
steel primer all complete.
9.48.1 Fixed to steel windows by welding Kg 213.19 3724.16 793961.31
9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked,
anodised (anodic coating not less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour and shade, with necessary screws etc.
9.101.1 Single rubber stopper nos 38.53 400.00 15412.88
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
9.147A Providing and fixing factory made uPVC white colour casement/casement cum
fixed glazed windows comprising of uPVC multi-chambered frame, sash and
mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2
mm thick galvanized mild steel section made from roll forming process of
required length (shape & size according to uPVC profile), uPVC extruded glazing
beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade)
friction hinges, zinc alloy (white powder coated) casement handles, G.I
fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,
plastic caps and necessary stainless steel screws etc. Profile of frame & sash
shall be mitred cut and fusion welded at all corners, mullion (if required) shall
be also fusion welded including drilling of holes for fixing hardware's and
drainage of water etc. After fixing frame the gap between frame and adjacent
finished wall shall be filled with weather proof silicon sealant over backer rod of
required size and of approved quality, all complete as per approved drawing &
direction of Engineer-in-Charge. (Single / double glass panes and silicon
sealant shall be paid separately). Variation in profile dimension in higher side
shall be accepted but no extra payment on this account shall be made
9.147 A4 Three Track Three Panel siliding panel with Two Glazed and one wire mesh
panel with aluminium channel for roller Track
9.147 A42 Using R3 series with Frame 98mm and Above x40mm and above Sqm 10580.98 1202.40 12722571.89
9.7.7.2 Floated Glass 5 mm thick(Wt Not less than 12.5 Kg/Sqm) Sqm 2530.33 1260.00 3188215.60
9.147.C1 Fixied Window Ventilator without Mullion/transom
9.147.C1.2 Using R2 Series with Frame (39&above)x39&above) Height up to 1.2 mtr Sqm 7837.56 115.20 902886.53
9.149 Providing and fixing casement handle made of zinc alloyed (white powder
coated) for uPVC casement window with necessary screws etc. complete.
9.15 Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC
sliding window with necessary screws etc. complete.
TOTAL (Carried Over to Summary of Civil Works) 24655860.2 0
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
SH-7 STEEL WORK
10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer using
structural steel etc. as required.
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
TOTAL (Carried Over to Summary of Civil Works) 1671128.94 0.00
SH-8 FLOORING WORK
11.23 Marble stone flooring with 18 mm thick marble stone, as per sample of marble
approved by Engineer-in-charge, over 20 mm (average) thick base of cement
mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement
slurry, including rubbing and polishing complete with :
11.37A Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS :
15622 (thickness to be specified by the manufacturer ) of approved make in all
colours, shades except burgundy, bottle green, black of any size as approved
by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick Sqm 1082.70 462.84 501115.23
bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey
cement slurry @ 3.3kg per sqm including pointing in white cement mixed with
pigment of matching shade complete.
8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make, in
all colours, shades except burgundy, bottle green, black of any size as
approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 Sqm 1233.76 3553.20 4383796.76
mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing
with grey cement slurry @ 3.3kg per sqm, including pointing in white cement
mixed with pigment of matching shade complete.
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and
conforming to IS:15622, of approved brand & manufacturer, in all colours and
shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)
jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with
white cement and matching pigments etc. The tiles must be cut with the zero
chipping diamond cutter only . Laying of tiles will be done with the notch
trowel, plier, wedge, clips of required thickness, leveling system and rubber
mallet for placing the tiles gently and easily
11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by
manufacturer), with water absorption less than 0.08 % and conforming to I.S.
15622, of approved make, in all colours & shade, in skirting, riser of steps,
over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand),
jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint
with white cement & matching pigments etc. complete
11.48 Grouting the joints of flooring/wall tiles having joints of 3 mm width, using
epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of
hardener and 0.20 kg of resin per kg), including filling /grouting and finishing
complete as per direction of Engineer-in-charge.
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and
conforming to IS:15622, of approved brand & manufacturer, in all colours and
shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)
jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with
white cement and matching pigments etc. The tiles must be cut with the zero
chipping diamond cutter only . Laying of tiles will be done with the notch
trowel, plier, wedge, clips of required thickness, leveling system and rubber
mallet for placing the tiles gently and easily.
11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size
TOTAL (Carried Over to Summary of Civil Works) 13265479.99 0
Sh-9 ROOFING WORK
12.52 Providing and fixing tiled false ceiling of specified materials of size 595x595
mm in true horizontal level, suspended on inter locking metal grid of hot dipped
galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive)
consisting of main "T" runner with suitably spaced joints to get required length
and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at
1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm
thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm
center to center to form a grid of 1200x600 mm and secondary cross "T" of
length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet
to be interlocked at middle of the 1200x600 mm panel to form grids of
600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles
of approved texture in the grid including, required cutting/making, opening for
services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main
"T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37
x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash
fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size
85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom
exposed width of 24 mm of all T-sections shall be pre-painted with polyester
paint, all complete for all heights as per specifications, drawings and as
directed by Engineer-in-charge.
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
12.52.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm,
made of Gypsum plasterboard, manufactured from natural gypsum as per IS
2095 part I and laminated with white 0.16mm thick fire retardant PVC film on
the face side and 12micron metalized polyester on the back side with all edges Sqm 2155.42 495.90 1068872.44
sealed with the face side PVC film which goes around and wraps
the edges and is bonded to the edges and the back side
metalized polyester film so as to make the tile a
completely sealed unit.
12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand
: 4 stone aggregate 10 mm and down gauge), including finishing with cement
mortar 1:3 (1 cement : 3 fine sand) as per standard design :
TOTAL (Carried Over to Summary of Civil Works) 1167042.19 0.00
SH-10 FINISHING WORK
13.4 12 mm cement plaster of mix :
13.16.1 6mm cement Ceilling plaster of mix :-
13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster
1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement Sqm 504.57 6759.95 3410851.54
plaster 1:6 (1 cement : 6 fine sand).
13.8 Providing and applying white cement based putty of average thickness 1 mm,
of approved brand and manufacturer, over the plastered wall surface to sqm 151.84 32371.98 4915432.16
prepare the surface even and smooth complete.
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC
(Volatile Organic Compound ) content less than 50 grams/ litre of approved
brand and manufacture, including applying additional coats wherever required
to achieve even shade and colour.
13.83.2 Two coats
13.21 Extra for providing and mixing water proofing material in cement per bag of per bag
plaster work in proportion recommended by the manufacturers of 50kg
13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone
additives of required shade:
13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including
priming coat of exterior primer applied @ 2.20 kg/10 sqm)
13.61 Painting with synthetic enamel paint of approved brand and manufacture to
give an even shade :
13.61.1 Two or more coats on new work Sqm 151.70 2388.10 362265.12
TOTAL (Carried Over to Summary of Civil Works) 25032507.74 0
Sh-11 WATER PROOFING
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
22.5 Providing and laying water proofing treatment in sunken portion of WCs,
bathroom etc., by applying cement slurry mixed with water proofing cement
compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing
cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water
proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air
cure for 4 hours followed with water curing for 48 hours.
The rate includes preparation of surface, treatment and sealing of all joints,
corners, junctions of pipes and masonry with polymer mixed slurry.
22.7 Providing and laying integral cement based water proofing treatment including
preparation of surface as required for treatment of roofs, balconies, terraces
etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed
with water proofing compound conforming to IS. 2645 and approved by
Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm
height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm
size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with
water proofing compound conforming to IS : 2645 and approved by Engineerin-
charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5
coarse sand ) admixed with water proofing compound conforming to IS : 2645
and approved by Engineerin-charge to required slope and treating similarly the
adjoining walls upto 300 mm height including rounding of junctions of walls and
(c) After two days of proper curing applying a second coat of cement slurry using
2.75 kg/ sqm of cement admixed with water proofing compound conforming to
IS : 2645 and approved by Engineer-in-charge.
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1
cement :4 coarse sand) admixed with water proofing compound conforming to
IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth
of approved quality in top layer of plaster and finally finishing the surface with
trowel with neat cement slurry and making pattern of 300x300 mm square 3
(e) The whole terrace so finished shall be flooded with water for a minimum period
of two weeks for curing and for final test.“All above operations to be done in
order and as directed and specified by the Engineer-in-Charge
22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm
TOTAL (Carried Over to Summary of Civil Works) 5410939.13 0.00
Sh-12 EXTERNAL DEVELOPMENT
2.60 Earth work in Excavation by mechanical means (Hydraulic
excavator)/manualmeans over areas (exceeding 30 cm in depth, 1.5 m in width
as well as 10sqm on plan) including getting out and disposal of excavated earth
lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
2.6.1 All kinds of soil Cum 172.71 830.35 143412.71
16.10 Preparation and consolidation of sub grade with power road roller of 8 to 12
tonne capacity after excavating earth to an average of 22.5 cm depth, dressing
to camber and consolidating with road roller including making good the Sqm 213.00 3321.40 707448.86
undulations etc. and re-rolling the sub grade and disposal of surplus earthwith
lead upto 50 metres.
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
16.78 Construction of granular sub-base by providing close graded Material
conforming to specifications, mixing in a mechanical mix plant at OMC, carriage
of mixed material by tippers to work site, for all leads & lifts, spreading in
uniform layers of specified thickness with motor grader on prepared surface
and compacting with vibratory power roller to achieve the desired density,
complete as per specifications and directions of Engineer-in-Charge.
16.78.2 With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having
16.75 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete
from batching plant. The ready mixed concrete shall be laid and finished with
screed board vibrator , vacuum dewatering process and finally finished by
floating, brooming with wire brush etc. complete as per specifications and Cum 9558.90 488.20 4666687.97
directions of Engineer-incharge. (The panel shuttering work shall be paid for
separately). (Note:- Cement content considered in this item is @ 330
kg/cum.Excess/less cement used as per design mix is payable/
recoverableseparately).
16.69 Providing and laying at or near ground level factory made kerb stone of M-25
grade cement concrete in position to the required line, level and curvature,
jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making
joints with or without grooves (thickness of joints except at sharp curve shall Cum 9844.78 32.66 321531.59
not to more than 5mm), including making drainage opening wherever required
complete etc. as per direction of Engineer-in-charge (length of finished kerb
edging shall be measured for payment). (Precast C.C. kerb stone shall be
approved by Engineer-in-charge).
2.1 Earth work in surface excavation not exceeding 30 cm in depth but exceeding
1.5 m in width as well as 10 sqm on plan including getting out and disposal of
excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
2.1.1 All kinds of soil Cum 126.35 430.14 54347.90
2.28 Surface dressing of the ground including removing vegetation and inequalities
not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up Cum 33.23 2150.71 71466.34
2.28.1 All kinds of soil
4.1 Providing and laying in position cement concrete of specified grade excluding
the cost of centering and shuttering - All work up to plinth level :
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8
graded stone aggregate 40 mm nominal size derived from natural sources)
16.78 Construction of granular sub-base by providing close graded Material
conforming to specifications, mixing in a mechanical mix plant at OMC, carriage
of mixed material by tippers to work site, for all leads & lifts, spreading in
uniform layers of specified thickness with motor grader on prepared surface
and compacting with vibratory power roller to achieve the desired density,
complete as per specifications and directions of Engineer-in-Charge.
16.78.2 With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having
16.68 Providing and laying 60mm thick faciory made cement concrete interlocking
paver block of M -30 grade made by block making machine with strong
vibratory compaction, of approved size, design & shape, laid in required colour
and pattern over and including 50mm thick compacted bed of coarse sand,
filling the joints with line sand etc. all complete as per the direction of Engineer-
PLANTER/BOUNDARY
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
2.1 Trenching in ordinary soil up to a depth of 60 cm including removal and
stacking of serviceable materials and then disposing of surplus soil, by
spreading and neatly levelling within a lead of 50 m and making up the
trenched area to proper levels by filling with earth or earth mixed with sludge
or / and manure before and after flooding trench with water (excluding cost of
imported earth, sludge or manure).
2.27 Supplying and filling in plinth with sand under floors, including watering,
ramming, consolidating and dressing complete.
M.R Supply & installation of Coir based Geotextile 700 gsmconformingtoIS3 15868 :
Part 1 to 6, for covering top of erosion proneslopesor4 embankments as per IS
15872:2009; fixed to the groundwithSS5 staples of 11 guage diaMetre and
220mmlength at every0.50mto6 0.75m in longitudinal and transverse direction Sqm 1693.08 47.04 79642.56
includingsupplyofall7 material, labour and equipment as required, upto any
leadandlift;as8 directed by Engineer-in-Charge
4.1 Providing and laying in position cement concrete of specified grade excluding
the cost of centering and shuttering - All work up to plinth level :
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8
graded stone aggregate 40 mm nominal size derived from natural sources)
6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level in all
shapes and sizes in :
6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 8860.41 15.46 136946.52
8.9 Stone tile (polished) work for wall lining over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm
including pointing in white cement complete.
8.9.1 8mm thick
8.9.1.1 Raj nagar plain white marble/ Udaipur green marble/ Zebra black marble Sqm 3104.27 67.20 208607.26
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
2.8 Spreading of sludge, dump manure and/or good earth in required thickness as
per direction of officer-in-charge (cost of sludge, dump manure and/ or good cum 44.91 17.00 763.47
earth to be paid separately).
TOTAL (Carried Over to Summary of Civil Works) 11194104.69 0.00
Sh-13 SEPTIC TANK
2.6 Earth work in Excavation by mechanical means (Hydraulic
excavator)/manualmeans over areas (exceeding 30 cm in depth, 1.5 m in width
as well as 10sqm on plan) including getting out and disposal of excavated earth
lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
2.6.1 All kinds of soil Cum 172.71 583.11 100711.13
2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / banking
excavated or stacked materials.
2.26.1 All kinds of soil Cum 123.38 194.37 23981.54
2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of
oundations etc. in layers not exceeding 20cm in depth, consolidating each
deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
4.1 Providing and laying in position cement concrete of specified grade excluding
the cost of centering and shuttering - All work up to plinth level :
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8
graded stone aggregate 40 mm nominal size derived from natural sources)
6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:r following grade of Conctrete
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6939.93 153.89 1067993.01
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
5.9 Centering and shuttering including strutting, propping etc. and removal of form
for all heights :
5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 381.58 70.74 26992.67
5.9.20 Suspended floors, roofs, landings, balconies and access platform. with water
proof ply 12 mm thick
10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer using
structural steel etc. as required.
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
TOTAL (Carried Over to Summary of Civil Works) 1575597.773 0
TOTAL OF CIVIL WORKS 192433824.85 0
PLUMBING & SANITARY
Providing and fixing white vitreous china pedestal type water closet (European
type) with seat and lid, 10 litre low level white vitreous china flushing cistern &
C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow
17.3 arrangement with specials of standard make and mosquito proof coupling of
approved municipal design complete, including painting of fittings and brackets,
cutting and making good the walls and floors wherever required : W.C. an with
ISI marked white solid lastic seat and lid
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid Each 7790.71 160.00 1246512.81
Providing and fixing wash basin with C.L brackets,15 C.P. brass pinar
taps, 32 mm C.P. brass waste of standard pattem, including painting of
fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.
brass pillar taps
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per
17.10 IS: 13983 with C.I- brackets and stainless steel plug 40 mm, including
painting of fittings and brackets, cutting and making good the walls.
17.10.2.1 Kitchen sink without drain board:- 610x510 mm bowl depth 200 mm Each 4807.57 80.00 384605.85
18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
NS-1 Silver, Chrome finish Sink Mixer Brass Faucet with Silicone Grey Flexible Spout Each 2659.64 160.00 425542.18
Providing and fixing C.P. brass basin mixer of approved quality and make
conforming to IS: specification.15 mm nominal bore
Providing and fixing of Health faucet with regulator with flexible pipe 1.0 m
long, wall hooked complete as required with flow rate of 3.8 LPM complying to
Green Building requirements. Make: Jaquar -Model No: ALD-565 or equivalent
Providing and fixing of 15 mm dia CP brass 2way bib cock with CP wall flange of
approved quality with flow rate of 3.8 LPM complying to Green Building Each 1081.80 320.00 346174.80
NS-4 requirements.
Providing and fixing of C.P. brass twin coat hook with PVC rawl plug & C.P.
brass screw complete as required.
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality &
make and as per the direction of Engineer-in-charge.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
18.53 approved quality conforming to IS:8931
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of
18.53A approved make and Each 72.78 480.00 34935.86
quality as per direction of Engineer-in-charge.
18.58 Providing and fixing'PTMT grating of approved quality and colour.
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm
wide with minimum distances of 37 mm from wall face with concealed fittings Each 225.70 160.00 36111.29
17.72 arrangement of approved quality and colour, weighing not less than 88 gms.
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth
102mm, height of 75mm with concealed fitting arrangements, weighing not Each 108.44 160.00 17351.17
18.65 less than 106 gms.
Providing and fixing mirror ot superior glass (ot approved quality) and ot
required shape andsize with plastic moulded frame of approved make and
shade with 6 mm thick hard board
17.32 backing :
17.32.2 Rectangular shape mm Each 1325.08 160.00 212012.73
EXTERNAL SERVICES
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply including all CPVC plain & brass
threaded fittings This includes jointing of pipes & fittings with one step CPVC
solvent cement, trenching, refilling & testing of joints complete as per direction
18.9 of Engineer in Charge.
18.9.2 20 mm nominal dia Pipes Metre 266.90 80.00 21352.29
18.9.3 25 mm nominal dia Pipes Metre 345.82 120.00 41498.01
18.9.4 32 mm nominal dia Pipes Metre 426.77 400.00 170709.33
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
18.17 (screwed end) :
Providing and fixing ball valve (brass) of approved quality, High or low
18.18 pressure, with plastic floats complete
NS-6 30 mm nimonal bore Each 779.42 160.00 124706.57
Providing and fixing enclosed type water meter (bulk type) conforming to IS :
2373 and tested by Municipal Board complete with bolts, nuts, rubber
insertions etc. (The tail pieces if required will be paid separately):
NS-7 25 mm nominal bore Each 3450.58 80.00 276046.37
Providing and fixing gun metal non- return valve of approved quality (screwed
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
Providing and placing on terrace (at all floor levels) polyethylene water storage
tank, IS : 12701 marked, with cover and suitable locking arrangement and
making necessary holes for inlet, outlet and overflow pipes but without fittings Per Litre 10.70 80000.00 856271.13
and the base support for tank
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including
18.1 cutting and making ood the walls etc.
SEWERAGE & DRAINAGE NETWORK
Providing, laying, jointing & testing of following P.V.C. pipes with solvent
cement joint for 8 kg/ sq. cm. pressures including testing of joints, cost of
jointing materials etc. complete in all respect.(class B)
NS-9 40 mm diametre metre 210.30 160.00 33647.96
NS-10 110 mm diameter metre 279.21 1600.00 446738.49
Providing and laying in position following PVC Tees, suitable for 6, 8 and 10
NS-11 Kg/Sqcm. Pressure pipes.
Providing and laying in position following PVC end Cap (plugs)
NS-12 suitable for 6, 8 and 10 Kg/Sq cm. Pressure pipes.
Providing and fixing square-mouth S.W. gully trap class SP-1
complete with C.I. grating brick masonry chamber with water tight
C.I. cover with frame of 300 x300 mm size (inside) the weight of
cover to be not less than 4.50 kg and frame to be not less than 2.70
kg as per standard design:
19.4 100x100 mm size P type
With common burnt clay F.P.S. (non modular)
19.4.1.1 bricks of class designation 7.5
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
Providing and fixing Single equal Plain junction Of required degree With
17.43 access door, insertion rubber washer 3 mm thick, bolts and nuts complete;
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10
graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes
19.3 including bed concrete as per standard design :
19.3.2 150 mm diameter S.W. pipe metre 723.06 1200.00 867675.11
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with
collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1
19.6 cement : 2 fine sand) including testing of joints etc. complete
Making connection of drain or sewer line with existing manhole including
breaking into and making good the walls, floors with cement cincrete 1:2:4 mix
(1cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
cement plastered on both sides with cement mortar 1:3 (1cement : 3 coarse
sand) finished with a floating coat of neat cement and making necessary
19.21 channels for the drain etc. complete for pipes 100 to 250mm dia.
19.21.1 For pipes 100 to 250 mm diameter Item 788.60 80.00 63087.72
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe
etc. and repairing the hole after insertion of drain pipe etc. with cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
18.77 nominal size), including finishing complete so as to make it leak proof.
Making khurras 45x45 cm with average minimum thickness of 5 cm cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20
mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 each 290.21 160.00 46433.25
mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,
12.22 rounding the edges and making and finishing the outlet complete
TOTAL OF PLUMBING & SANITARY WORKS 7529844.40 2811789.04
EXTERNAL PLUMBING WORKS
EXTERNAL WATER SUPPLY
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
2.1 Excavating trenches by mechinical / manual means of required width for pipes,
cables, etc including excavation for sockets, and dressing of sides, ramming of
bottoms, for all depth, including getting out the excavated soil, and then
returning the soil as required, in layers not exceeding 20 cm in depth, including
consolidating each deposited layer by ramming, watering, etc. and disposing of
surplus excavated soil as directed, within a lead of 50 m :
2.10.1 All kinds of soil
2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia. metre 209.79 1553.00 325798.32
18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply including all CPVC plain & brass
threaded fittings This includes jointing of pipes & fittings with one step CPVC
solvent cement, trenching, refilling & testing of joints complete as per direction
of Engineer in Charge.
18.9.4 32 mm nominal dia Pipes Metre 426.77 173.00 73831.78
18.9.5 40 mm nominal dia Pipes Metre 547.87 217.00 118887.26
18.9.6 50 mm nominal dia Pipes Metre 772.83 334.00 258126.34
18.9.7 65 mm nominal dia Pipes Metre 1629.25 409.00 666363.43
18.9.8 80 mm nominal dia Pipes Metre 2107.94 332.00 699834.48
18.9.9 100 mm nominal dia Pipes Metre 3183.48 88.00 280146.23
18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :
18.14 Fixing water meter and stop cock in G.I. pipe line including cutting and
threading the pipe and making long screws etc. complete (cost of water meter Metre 0.00 92.00 0.00
and stop cock to be paid separately).
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
NS-02 Providing, fixing, In position Brass Sprinkler including riser pipe & accessories
for garden/green area complete as required.
NS-03 Providing, fixing, in position 25 mm dia Lawn hydrant consisting of 25 mm dia
Ball Valve, G.I nipple and threaded hose reciever complete as required.
18.32 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement
mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box
100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab
1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement
: 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside
plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick,
finished with a floating coat of neat cement complete as per standard design :
18.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1938.87 92.00 178376.07
SEWERAGE & DRAINAGE NETWORK
2.10 Excavating trenches of required width for pipes, cables, etc, including
excavation for sockets, depth upto 1.5 m, including getting out the excavated
materials, returning the soil as required in layers not exceeding 20 cm in depth,
including consolidating each deposited layers by ramming, watering etc.,
stacking serviceable material for measurements and disposal of unserviceable
material as directed, within a lead of 50 m :
2.10.1 Ordinary rock :
2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but
not exceeding 300 mm dia
2.13 Excavating trenches of required width for pipes, cables, etc, including
excavation for sockets, depth upto 1.5 m, including getting out the excavated
materials, returning the soil as required in layers not exceeding 20 cm in depth,
including consolidating each deposited layers by ramming, watering etc.,
stacking serviceable material for measurements and disposal of unserviceable
material as directed, within a lead of 50 m :
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
2.13.1 Ordinary rock :
2.13.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre 971.72 147.00 142843.10
19.6 Providing and laying non-pressure NP2 class (light duty) R. . . pipes with collars
jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement :
2 fine sand) including testing of joints etc. complete :.
19.27 Constructing brick masonry road gully chamber 50x45x60 cm with bricks
in cement mortar 1 (1 cement : 4 coarse sand) including 500x450 mm
pre-cast R.C.C. horizontal grating with frame complete as per standard
19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 5797.25 94.00 544941.26
19.28 Constructing brick masonry road gully chamber 45x45x77.5 cm with
bricks in cement mortar (1 cement : 4 coarse sand ) with precast
R.C.C. vertical grating complete as per standard design
19.28.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 6704.02 56.00 375425.07
19.7 Constructing brick masonry manhole in cement mortar ( 1 cement
' 4 coarse sand ) with R.C.C. top slab with mix (1 cernent : 1.5
coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size),
foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8
graded stone aggregate 40 mm nominal size), inside plastering 12 mm
thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement and making channels in cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) finished with a floating coat of neat cement complete as per
standard design
19.7.1 Inside size 90x80 cm and 45 cm deep including cover with frame (light duty)
455x610 mm internal dimensions, total weight of cover and frame to be not
less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
19.7.1.1 With common bumt clay F.P.S. (non modular) bricks of class designation 7.5 each 12426.20 28.00 347933.51
19.8 Extra for depth for manholes
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
19.8.1 Size 90x80 cm
19.8.1.1 With common bumt clay F.P.S. (non modular) bricks of class designation 7.5 each 8587.43 28.00 240447.94
19.16 Providing orange colour safety foot rest of minimum 6 mm thick plastic
encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS :
1786, having minimum cross section as 23 mmx25 mm and over all minimum
length 263 mm and width as 165 mm with minimum 112 mm space between
protruded legs having 2 mm tread on top surface by ribbing or chequering
besides necessary and adequate anchoring projections on tail length on 138 each 538.77 356.00 191802.01
mm as per standard drawing and suitable to with stand the bend test and
chemical resistance test as per specifications and having manufacture's
permanent identification mark to be visible even after fixing, including fixing in
manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I.
grating brick masonry chamber with water tight C.I. cover with frame of 300
x300 mm size (inside) the weight of cover to be not less than 4.50 kg and
frame to be not less than 2.70 kg as per standard design:
19.4.2 150x100 mm size P type
19.4.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 2660.47 88.00 234121.65
TOTAL OF EXTERNAL PLUMBING WORKS 6067813.18 357065.06
INTERNAL ELECTRICAL WORKS
LT PANEL(Floor Panel)
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
MR - 1 Design, manufacture, supply inspection, installation, handling, assembling,
affecting proper connections, testing and commissioning of 14 SWG CRCA sheet
steel fabricated cubical type Main L.T. Panel, floor mounting, dust & vermin
proof, front operated construction, enclosure class - IP 56, powder coated after
proper treatment with 9 tank process with top/bottom removable gland plates,
as required, double compression type cable glands, earth bus, hinged and
lockable doors to achieve dust and vermin proof complete with all inter
connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc.
The Aluminium Bus Bar shall be of suitable length, 500 volts, 3 phase 50 Hz
TPN, electrolytic aluminium as per IS 8623 . The panel feeders shall be suitable
for terminating suitable up to 3.5 / 4 core 300 sq mm armoured aluminium
cable or Aluminium Bus Duct as required.
Incomer from Transformer
It shall be electrically & Mechanically interlocked with both incoming & Bus
coupler's contactor in such a way that at any one time two supply should not
1 nos 400 AMP FP MCCB of 36 KA with following accessories
Metering for incomers Each 345428.15 12.00 4145137.82
1 nos. Under voltage relay with timer.
0-500 volt range voltmeter with selector switch (P.T. connected)
1 set of 3 CT's of ratio 400/5A, Class 1.0 accuracy 15 VA burden for metering.
1 set of 3 CT's of ratio 400/5A, Class 1.0 accuracy 15 VA burden for APFCR.
1 nos. Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ,
MDI (EM 6400 of Conzerve or equi.) with RS 485 communication port for
communication / report generation.
Power factor meter.
Frequency meter.
Indications for incomers
3 Nos. LED type phase indicating lamps, each lamp shall be with bakup HRC
1 section of 600AMP , 415 Volts, 3 phase 50 HZ TPN high conductivity
electrolytic Aluminium bus bar of suitable length, SMC / DMC supports, with
colour coading and insulated by heat shrinkable sleeves and clip on shrouds for
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
Distribuition Boards
2.4 Supplying and fixing following way, horizontal type three pole and neutral,
sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete
with tinned copper bus bar, neutral bus bar, earth bar, din bar,
interconnections, powder painted including earthing etc. as required. (But
without MCB/RCCB/Isolator)
2.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C”
curve, miniature circuit breaker suitable for inductive load of following poles in
the existing MCB DB complete with connections, testing and commissioning etc.
2.14 Supplying and fixing following rating, double pole, (single phase and neutral),
240 volts, residual current circuit breaker (RCCB), having a sensitivity current
30 milli amperes in the existing MCB DB complete with connections, testing and
commissioning etc. as required.
2.13 Supplying and fixing following rating, four pole, 415 volts, isolator in the
existing MCB DB complete with connections, testing and commissioning etc. as
1.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5
sq.mm FRLS PVC insulated copper conductor single core cable in surface /
recessed medium class PVC conduit, with modular switch, modular plate,
suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated
copper conductor single core cable etc as required.
1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface / recessed medium class PVC conduit, 2
way modular switch, modular plate, suitable GI box and earthing the point with Each 1616.09 160.00 258574.36
1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
Power Wiring/Submain Wiring
1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes
of FRLS PVC insulated copper conductor, single core cable in surface/ recessed
medium class PVC conduit as required
Telephone & TV Wiring
1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper
conductor PE insulated, shielded with fine tinned copper braid and protected
with PVC sheath in the existing surface/ recessed steel/ PVC conduit as
1.21 Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/recess including cutting the wall and making good the
same in case of recessed conduit as required.
Power Receptacles(Domestic Types)
1.24 Supplying and fixing following modular switch/ socket on the existing modular
plate & switch box including connections but excluding modular plate etc. as
1.24.1 5/6 amps switch
1.24.4 3 pin 5/6 amp socket outlet Each 126.22 1280.00 161567.59
1.24.5 6 pin 15/16 amp socket outlet Each 203.82 320.00 65222.98
1.24.7 TV antenna socket outlet Each 153.13 80.00 12250.00
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
1.25 Supplying and fixing two module stepped type electronic fan regulator on the
existing modular plate switch box including connections but excluding modular Each 381.78 400.00 152711.17
plate etc. as required.
1.27 Supplying and fixing following size/ modules, GI box alongwith modular base &
cover plate for modular switches in recess etc as required.
Supply and Installation of Lights
NDSR Supply,Installation ,testing and commissioning of following type light and fan
fixtures with all accessories as required .The efficacy of the LED lamp shall be
not less than 100 lm/watt
MR-2 1X20W ,4000K,4feet LED tube ,surface /suspension light fixtures of batten
MR-3 1X12W ,2000K ,2 feet LED Tube l,surface /suspension light fixtures of batten
MR-4 5W LED Surface mount Light(For balcony/passage) Each 467.06 320.00 149458.23
MR-5 Wall mounted fixtures with 9W LED Each 583.82 480.00 280234.19
MR-6 9/12W LED bulb including Angle Batten Holder Each 233.53 480.00 112093.68
MR-7 Supply and Fixing of 225mm dia single phase ,exhaust with necessary angle
MR-8 Supply and fixing of 1200 mm sweep ceiling fan Nos 1829.34 336.00 614659.77
MR-9 Calling Bell Nos 467.24 80.00 37379.38
Earthing Protection
5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories,
and providing masonry enclosure with cover plate having locking arrangement
and watering pipe etc. (but without charcoal/ coke and salt ) as required.
5.15 Providing and fixing 25mmx 5mm G.I.Strip on surface or in recess for
connection etc as required.
TOTAL OF INTERNAL ELECTRICAL WORKS 20668715.9 6152906.676
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
EXTERNAL ELECTRICAL WORKS
A 400 KVA 3-Phase Package Substation
1 11 KV HT PANEL
Supply, Installation, Testing and Commissioning of indoor type floor mounted
metal clad, 2mm thick, 11KV VCB panel with 1No. 11 kV, 630A 350MVA VCB +
1No. 11 kV, 630A 350MVA VCB Panel with totally enclosed & electrically
interlocked, horizontal drawout, horizontal isolation type breaker as per IS
13118, as per specifications, having capacities as mentioned below, single
break, trip free mechanism, manually charged and auto/manually closing
breaker suitable for use on 11kV, 3Phase, 50Hz A.C. supply with short circuit
fault level of 350 MVA, complete with self contained electrically interlocked rack
in and rack out mechanism, air insulated & encapsulated copper bus bars of
800Amp capacity, breaker featured with mechanical ON/ OFF indicator with
hand trip device, spring release coil, shunt trip coil and auxiliary switch of 4NO
+ 4NC , PT 11kv/110volts , IDMT Relay and equipped with following
switchgears and accessories i/c connections and Outgoing shall be suitable for
3Cx 185*sq.mm XLPE 11kV cable (cable entry from bottom/top/side) end
termination with heat shrinkable jointing material, Strip heater with thermostat
to prevent absorption of moisture etc. as required.
INCOMER - Consisting of followings
1 No. 630 Amp. 350 MVA VCB with earth switch.
1 No. 630 Amp. - 11kv/110 volts PT class 0.5 accuracy and 100va burden with
1 no. voltmeter (0-15kv), digital type, selector switch for voltmeter &
protection fuses/MCB for HT metering up to 12kv on incomer.
1 NO.- Digital flush type class- 0.5 or better accuracy multifunction meter
showing voltage, ampere, KWH and power factor, frequency etc. with MDI
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
Manual push buttons for VCB off, VCB on, & for trip alarm cancellation. Shunt
trip coil, 1 set of three phase R,Y,B indicating lamps along with 2A SP MCB back
up protection, control terminals & wiring, One number tripple pole IDMT non-
directional relay, two poles arranged for over current protection and one pole
for earth fault protection. One set inbuilt DC power pack. Cable end box, trip
super vision relay, master trip relay, digital display power factor meter AC 3
phase, 1 set of solid stat audio and visual annucinator with test/accept/reset-
push button ane electronic hooter, strip heater with thermostat to prevent
absorption of moisture.
OUTGOING - 1No. Consisting of followings
630 Amp. 350 MVA VCB with earth switch.
Power pack with 220 volt AC input & 24 volt DC continious output suitable for
closing/tripping/indication of HT panel board with 2 nos. of 12 volts each
maintenance free batteries of 100(suitable) AH each, charging unit, capacitor
bank for emergency delievring for trip system complete with suitable capacity
of ammeter & voltmeter i/c connections with 2.5 sqmm. FRLS insulated copper
conductor cable etc. as required.
Suitable space for termination of 1 No. 3 C x 300/240 sq.mm XLPE cable.
TRANSFORMER _ described as above Set
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
SITC of 400 kVA, 11kV/433V OLTC STEP DOWN TRANSFORMER with
Foundation as per standard,(Copper double wound, oil immersed naturally
cooled, core type trf) and neutral brought out for earthing. The transformer
shall be provided with (+) 7.5% and (-) 7.5% in step of 2.5% ON load tap
changer on HT side as per IS : 11171 - 1985 IEC 60726 & ECBC building code
2017. HT side cable termination box shall be suitable up to 11 KV, 3 C x
240/185 mm2 XLPE cable. LT side cable termination box shall be suitable up to
3.5 x 300 mm2 XLPE cablecomplete in all respect as required as per
SAFETY EQUIPMENTS;
Supply, installation, testing and commissioning of all safety Equipments.
Supplying of Rubber hand gloves suitable for 1 kV. Pair
Supply & fixing of Rescue Hook,Discharge Rod of 11Kv grade required in panel
Supplying and fixing of Shock treatment chart both in Regional, Hindi,Tamil &
English.and framed with 5mm thick glass as required.
Supply & fixing MV danger notice plate of 200 mm x 150mm, made of mild
steel sheet of at least 2mm thick & vitreous enamelled white on both sides and Each
with inscription in signal red colour on front side as required.
Supply & fixing HT danger notice plate of 250 mm x 200mm, made of mild
steel sheet of at least 2mm thick & vitreous enamelled white on both sides and Each
with inscription in signal red colour on front side as required.
Supply of First aid box containing material as prescribed by St. John Ambulance
brigade OR Indian Red Cross complete as required.
Providing of Insulation mat 1 meter wide & 2.5mm thick to withstand 36kV
dielectric strength as per IS 15652- 2006
Supply & fixing of 2nos. Sand bucket with stand and other accessories. SET
Supply & fixing of 1nos. Dos & don't chart and other accessories. NOS.
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
Supply, installation, testing and commissioning fire extinguisher of carbon
dioxide type consisting of brand new high pressure steel cylinder bearing IS:
7285 mark and having the approval of controller of explosives Nagpur, wheel
type valve bearing IS:3224 mark internal discharge tube, 1 meter long high SET
pressure discharge hose, non conducting horn, suspension bracket, fully
charged bearing IS: making fixed to wall as directed conforming IS :
Capacity 4.5 Kg.
TRANSFORMER _ described as above Set
3 Main LT Panel
Design, manufacture, supply inspection, instalation, handling, assembling,
affecting proper connections, testing and commissioning of 14 SWG CRCA sheet
steel fabricated cubical type Main L.T. Panel, floor mounting, dust & vermin
proof, front operated construction, enclosure class - IP 52, powder coated after
proper treatment with 9 tank process with top/bottom removable gland plates,
as required, double compression type cable glands, earth bus, hinged and
lockable doors to achieve dust and vermin proof complete with all inter
connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc.
The Aluminium Bus Bar shall be of suitable length, 500 volts, 3 phase 50 Hz
TPN, electrolytic aluminium as per IS 8623 . The panel feeders shall be suitable
for terminating suitable up to 3.5 / 4 core 300 sq mm armoured aluminium
cable or Aluminium Bus Duct as required.
Incomer from Transformer
It shall be electrically & Mechanically interlocked with both incoming & Bus
coupler's contactor in such a way that at any one time two supply should not
i. 1 nos 800 AMP FP MCCB of 35 KA with following accessories
ii. Metering for incomers
iii. 1 nos. Under voltage relay with timer.
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
iv. 0-500 volt range voltmeter with selector switch (P.T. connected)
v. 1 set of 3 CT's of ratio 800/5A, Class 1.0 accuracy 15 VA burden for metering.
1 set of 3 CT's of ratio 800/5A, Class 1.0 accuracy 15 VA burden for APFCR.
1 nos. Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ,
MDI (EM 6400 of Conzerve or equi.) with RS 485 communication port for
communication / report generation.
Power factor meter.
Frequency meter.
Indications for incomers
3 Nos. LED type phase indicating lamps, each lamp shall be with bakup HRC
1 section of 2500 AMP , 415 Volts, 3 phase 50 HZ TPN high conductivity
electrolytic Aluminium bus bar of suitable length, SMC / DMC supports, with
colour coading and insulated by heat shrinkable sleeves and clip on shrouds for
The current density of bus bar up to 1000 Amp shall be minimum 1.00 sq mm /
The Maximum allowable temperature for the Bus bar to be restricted to 85 deg
C. The temperature rise should be restricted to 35 deg C above design ambient
temperature of 50 deg C.
All outgoing feeders shall be provided with one set of phase indication lamps
and trip indication lamps with protection fuses/MCB and ammeter with selector
switch with suitable ratio CT's of accuracy class 1.0
6 No. 400 amps 4P MCCB 35kA outgoing feeder .
1 No. 320 amps 4P MCCB 35kA outgoing feeder .
1 No. 150 amps 4P MCCB 35kA outgoing feeder .
2 No. 100 amps 4P MCCB 35kA outgoing feeder .
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
Main LT Panel _ described as above Set 2138789.16 1.00 2138789.16
A 200 KVA 3-Phase Package Substation
1 11 KV HT PANEL
Supply, Installation, Testing and Commissioning of indoor type floor mounted
metal clad, 2mm thick, 11KV VCB panel with 1No. 11 kV, 630A 350MVA VCB +
1No. 11 kV, 630A 350MVA VCB Panel with totally enclosed & electrically
interlocked, horizontal drawout, horizontal isolation type breaker as per IS
13118, as per specifications, having capacities as mentioned below, single
break, trip free mechanism, manually charged and auto/manually closing
breaker suitable for use on 11kV, 3Phase, 50Hz A.C. supply with short circuit
fault level of 350 MVA, complete with self contained electrically interlocked rack
in and rack out mechanism, air insulated & encapsulated copper bus bars of
800Amp capacity, breaker featured with mechanical ON/ OFF indicator with
hand trip device, spring release coil, shunt trip coil and auxiliary switch of 4NO
+ 4NC , PT 11kv/110volts , IDMT Relay and equipped with following
switchgears and accessories i/c connections and Outgoing shall be suitable for
3Cx 185*sq.mm XLPE 11kV cable (cable entry from bottom/top/side) end
termination with heat shrinkable jointing material, Strip heater with thermostat
to prevent absorption of moisture etc. as required.
INCOMER - Consisting of followings
1 No. 630 Amp. 350 MVA VCB with earth switch.
1 No. 630 Amp. - 11kv/110 volts PT class 0.5 accuracy and 100va burden with
1 no. voltmeter (0-15kv), digital type, selector switch for voltmeter &
protection fuses/MCB for HT metering up to 12kv on incomer.
1 NO.- Digital flush type class- 0.5 or better accuracy multifunction meter
showing voltage, ampere, KWH and power factor, frequency etc. with MDI
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
Manual push buttons for VCB off, VCB on, & for trip alarm cancellation. Shunt
trip coil, 1 set of three phase R,Y,B indicating lamps along with 2A SP MCB back
up protection, control terminals & wiring, One number tripple pole IDMT non-
directional relay, two poles arranged for over current protection and one pole
for earth fault protection. One set inbuilt DC power pack. Cable end box, trip
super vision relay, master trip relay, digital display power factor meter AC 3
phase, 1 set of solid stat audio and visual annucinator with test/accept/reset-
push button ane electronic hooter, strip heater with thermostat to prevent
absorption of moisture.
OUTGOING - 1No. Consisting of followings
630 Amp. 350 MVA VCB with earth switch.
Power pack with 220 volt AC input & 24 volt DC continious output suitable for
closing/tripping/indication of HT panel board with 2 nos. of 12 volts each
maintenance free batteries of 100(suitable) AH each, charging unit, capacitor
bank for emergency delievring for trip system complete with suitable capacity
of ammeter & voltmeter i/c connections with 2.5 sqmm. FRLS insulated copper
conductor cable etc. as required.
Suitable space for termination of 1 No. 3 C x 300/240 sq.mm XLPE cable.
TRANSFORMER _ described as above Set
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
SITC of 200 kVA, 11kV/433V OLTC STEP DOWN TRANSFORMER with
Foundation as per standard,(Copper double wound, oil immersed naturally
cooled, core type trf) and neutral brought out for earthing. The transformer
shall be provided with (+) 7.5% and (-) 7.5% in step of 2.5% ON load tap
changer on HT side as per IS : 11171 - 1985 IEC 60726 & ECBC building code
2017. HT side cable termination box shall be suitable up to 11 KV, 3 C x 240
mm2 XLPE cable. LT side cable termination box shall be suitable up to 3.5 x
300/240 mm2 XLPE cablecomplete in all respect as required as per
SAFETY EQUIPMENTS;
Supply, installation, testing and commissioning of all safety Equipments.
Supplying of Rubber hand gloves suitable for 1 kV. Pair
Supply & fixing of Rescue Hook,Discharge Rod of 11Kv grade required in panel
Supplying and fixing of Shock treatment chart both in Regional, Hindi,Tamil &
English.and framed with 5mm thick glass as required.
Supply & fixing MV danger notice plate of 200 mm x 150mm, made of mild
steel sheet of at least 2mm thick & vitreous enamelled white on both sides and Each
with inscription in signal red colour on front side as required.
Supply & fixing HT danger notice plate of 250 mm x 200mm, made of mild
steel sheet of at least 2mm thick & vitreous enamelled white on both sides and Each
with inscription in signal red colour on front side as required.
Supply of First aid box containing material as prescribed by St. John Ambulance
brigade OR Indian Red Cross complete as required.
Providing of Insulation mat 1 meter wide & 2.5mm thick to withstand 36kV
dielectric strength as per IS 15652- 2006
Supply & fixing of 2nos. Sand bucket with stand and other accessories. SET
Supply & fixing of 1nos. Dos & don't chart and other accessories. NOS.
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
Supply, installation, testing and commissioning fire extinguisher of carbon
dioxide type consisting of brand new high pressure steel cylinder bearing IS:
7285 mark and having the approval of controller of explosives Nagpur, wheel
type valve bearing IS:3224 mark internal discharge tube, 1 meter long high SET
pressure discharge hose, non conducting horn, suspension bracket, fully
charged bearing IS: making fixed to wall as directed conforming IS :
Capacity 4.5 Kg.
TRANSFORMER _ described as above Set
3 Main LT Panel
Design, manufacture, supply inspection, instalation, handling, assembling,
affecting proper connections, testing and commissioning of 14 SWG CRCA sheet
steel fabricated cubical type Main L.T. Panel, floor mounting, dust & vermin
proof, front operated construction, enclosure class - IP 52, powder coated after
proper treatment with 9 tank process with top/bottom removable gland plates,
as required, double compression type cable glands, earth bus, hinged and
lockable doors to achieve dust and vermin proof complete with all inter
connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc.
The Aluminium Bus Bar shall be of suitable length, 500 volts, 3 phase 50 Hz
TPN, electrolytic aluminium as per IS 8623 . The panel feeders shall be suitable
for terminating suitable up to 3.5 / 4 core 300 sq mm armoured aluminium
cable or Aluminium Bus Duct as required.
Incomer from Transformer
It shall be electrically & Mechanically interlocked with both incoming & Bus
coupler's contactor in such a way that at any one time two supply should not
i. 1 nos 400 AMP FP MCCB of 35 KA with following accessories
ii. Metering for incomers
iii. 1 nos. Under voltage relay with timer.
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
iv. 0-500 volt range voltmeter with selector switch (P.T. connected)
v. 1 set of 3 CT's of ratio 400/5A, Class 1.0 accuracy 15 VA burden for metering.
1 set of 3 CT's of ratio 400/5A, Class 1.0 accuracy 15 VA burden for APFCR.
1 nos. Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ,
MDI (EM 6400 of Conzerve or equi.) with RS 485 communication port for
communication / report generation.
Power factor meter.
Frequency meter.
Indications for incomers
3 Nos. LED type phase indicating lamps, each lamp shall be with bakup HRC
1 section of 1800 AMP , 415 Volts, 3 phase 50 HZ TPN high conductivity
electrolytic Aluminium bus bar of suitable length, SMC / DMC supports, with
colour coading and insulated by heat shrinkable sleeves and clip on shrouds for
The current density of bus bar up to 600 Amp shall be minimum 1.00 sq mm /
The Maximum allowable temperature for the Bus bar to be restricted to 85 deg
C. The temperature rise should be restricted to 35 deg C above design ambient
temperature of 50 deg C.
All outgoing feeders shall be provided with one set of phase indication lamps
and trip indication lamps with protection fuses/MCB and ammeter with selector
switch with suitable ratio CT's of accuracy class 1.0
3 No. 400 amps 4P MCCB 35kA outgoing feeder .
3 No. 200 amps 4P MCCB 35kA outgoing feeder .
1 No. 150 amps 4P MCCB 35kA outgoing feeder .
1 No. 100 amps 4P MCCB 35kA outgoing feeder .
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
Main LT Panel _ described as above Set 1110449.73 2.00 2220899.46
B CAPACITOR PANEL
Design, manufacture, supply, inspection, handling, assembling, affecting proper
connections, testing and commissioning of 14 SWG CRCA sheet steel fabricated
cubical type 100 KVAR A P F C Panel consisting of 5 / 10 / 15 / 20 / 25 / 50
KVAR capacitor units in tier formation, housed in an integrated cubicle type
automatic switching ON and OFF control panel, floor mounting, dust & vermin
proof, front operated construction, enclosure class - IP 52, powder coated after
proper treatment with 9 tank process with top/bottom removable gland plates,
as required, double compression type cable glands, earth bus, hinged and
lockable doors to achieve dust and vermin proof complete with all inter
connections small wiring by min. 2.5 sq. mm. copper wires, ckt labels etc. The
Aluminium Bus Bar shall be of suitable length, 500 volts, 3 phase 50 Hz TPN,
electrolytic aluminium as per IS 8623 .
The incoming MCCB shall be microprocessor based with inbuilt O/L & S/C
release with E/F protection and All outgoings MCCB's shall be thermal-magnetic
based with inbuilt O/L & S/C release.
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking
arrangement, with adjustable O/L & S/C trip setting as per load requirement.
All TP MCCB's shall be with AC 3 duty contactor for neutral isolation. All TP
MCCB shall be with heavy duty solid isolable neutral link. The breaking capacity
specified is Ics value. The instrument chamber shall be separate and shall
comprise of flush type ammeter, voltmeter, selector switches, CT's, PT's, etc
Capacitor duty contactors should be used for switching individual capacitor
The fault withstanding capacity of panel & its control gear shall be min. 35 KA
Each section of capacitor panel shall have Verticle hood & exhaust fans for
ventilation purpose.
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
The maximum height of the panel should not exceed 2100 mm unless
specifically approved.
The capacitor panel shall be integrated with the main L T Panel as per
schematic diagram.
1 no. 320 AMP. Three Pole, MCCB with heavy duty solid neutral link, with O/C ,
S/C, E/F protection, adjustable thermal magnetic release, 35 KA Breaking
1 set- 3 CTs , ratio 320/5A Class 1.0 accuracy 15 VA burden for metering.
1Nos- (0-320A) digital Ameter with selector switch
Micro processor based automatic power factor control relay (3 phase)
(including power factor meter) in 16 steps for automatic cut off or add on
capacitor units to keep the power factor at 0.95 with variation of loads. All
associated auxiliary contactors / relays shall be provided with in the scope of
Phase indicating lamps with HRC fuses, and indicating in each capacitor
chamber unit to indicate On/Off status of capacitor unit.
500 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity electrolytic
Aluminium bus bar of suitable length, SMC / DMC supports, with colour coding
and insulated by heat shrinkable sleeves and clips on shrouds for joints. The
current density of bus bar shall be minimum 1.00 sq mm / amp.
The Maximum allowable temperature for the Bus bar to be restricted to 85 deg
C. The temperature rise should be restricted to 35 deg C above ambient
1 no. of 125 AMPS TPN 35 KA MCCB and 80 amps AC3 duty contactor with 50
KVAR gas filled 415 V capacitor bank, auto-manual selector switch, start stop
push button for manual operation including on/off indicating lamps and delay
timer complete.
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
1 no. of 63 AMPS TPN 35 KA MCCB and 80 amps AC3 duty contactor with 20
KVAR gas filled 415 V capacitor bank, auto-manual selector switch, start stop
push button for manual operation including on/off indicating lamps and delay
timer complete.
2 no. of 25 AMPS TPN 35 KA MCCB and 80 amps AC3 duty contactor with 10
KVAR gas filled 415 V capacitor bank, auto-manual selector switch, start stop
push button for manual operation including on/off indicating lamps and delay
timer complete.
2 no. of 16 AMPS TPN 35 KA MCCB and 32 amps AC3 duty contactor with 5
KVAR gas filled 415 V capacitor bank, auto-manual selector switch, start stop
push button for manual operation including on/off indicating lamps and delay
timer complete.
EXTERNAL LIGHTING FEEDER PILLAR _ described as above Set 298539.90 1.00 298539.90
B CAPACITOR PANEL
Design, manufacture, supply, inspection, handling, assembling, affecting proper
connections, testing and commissioning of 14 SWG CRCA sheet steel fabricated
cubical type 50 KVAR A P F C Panel consisting of 5 / 10 / 15 / 20 / 25 / 50
KVAR capacitor units in tier formation, housed in an integrated cubicle type
automatic switching ON and OFF control panel, floor mounting, dust & vermin
proof, front operated construction, enclosure class - IP 52, powder coated after
proper treatment with 9 tank process with top/bottom removable gland plates,
as required, double compression type cable glands, earth bus, hinged and
lockable doors to achieve dust and vermin proof complete with all inter
connections small wiring by min. 2.5 sq. mm. copper wires, ckt labels etc. The
Aluminium Bus Bar shall be of suitable length, 500 volts, 3 phase 50 Hz TPN,
electrolytic aluminium as per IS 8623 .
The incoming MCCB shall be microprocessor based with inbuilt O/L & S/C
release with E/F protection and All outgoings MCCB's shall be thermal-magnetic
based with inbuilt O/L & S/C release.
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking
arrangement, with adjustable O/L & S/C trip setting as per load requirement.
All TP MCCB's shall be with AC 3 duty contactor for neutral isolation. All TP
MCCB shall be with heavy duty solid isolable neutral link. The breaking capacity
specified is Ics value. The instrument chamber shall be separate and shall
comprise of flush type ammeter, voltmeter, selector switches, CT's, PT's, etc
Capacitor duty contactors should be used for switching individual capacitor
The fault withstanding capacity of panel & its control gear shall be min. 35 KA
Each section of capacitor panel shall have Verticle hood & exhaust fans for
ventilation purpose.
The maximum height of the panel should not exceed 2100 mm unless
specifically approved.
The capacitor panel shall be integrated with the main L T Panel as per
schematic diagram.
1 no. 200 AMP. Three Pole, MCCB with heavy duty solid neutral link, with O/C ,
S/C, E/F protection, adjustable thermal magnetic release, 35 KA Breaking
1 set- 3 CTs , ratio 200/5A Class 1.0 accuracy 15 VA burden for metering.
1Nos- (0-250A) digital Ameter with selector switch
Micro processor based automatic power factor control relay (3 phase)
(including power factor meter) in 16 steps for automatic cut off or add on
capacitor units to keep the power factor at 0.95 with variation of loads. All
associated auxiliary contactors / relays shall be provided with in the scope of
Phase indicating lamps with HRC fuses, and indicating in each capacitor
chamber unit to indicate On/Off status of capacitor unit.
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
200 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity electrolytic
Aluminium bus bar of suitable length, SMC / DMC supports, with colour coding
and insulated by heat shrinkable sleeves and clips on shrouds for joints. The
current density of bus bar shall be minimum 1.00 sq mm / amp.
The Maximum allowable temperature for the Bus bar to be restricted to 85 deg
C. The temperature rise should be restricted to 35 deg C above ambient
1 no. of 63 AMPS TPN 35 KA MCCB and 80 amps AC3 duty contactor with 20
KVAR gas filled 415 V capacitor bank, auto-manual selector switch, start stop
push button for manual operation including on/off indicating lamps and delay
timer complete.
2 no. of 25 AMPS TPN 35 KA MCCB and 80 amps AC3 duty contactor with 10
KVAR gas filled 415 V capacitor bank, auto-manual selector switch, start stop
push button for manual operation including on/off indicating lamps and delay
timer complete.
2 no. of 16 AMPS TPN 35 KA MCCB and 32 amps AC3 duty contactor with 5
KVAR gas filled 415 V capacitor bank, auto-manual selector switch, start stop
push button for manual operation including on/off indicating lamps and delay
timer complete.
EXTERNAL LIGHTING FEEDER PILLAR _ described as above Set 189980.29 3.00 569940.88
C ESSENTIAL LIGHTING FEEDER PILLAR
Design, manufacture, supplying fixing in position of outdoor type feeder pillar,
metal clade, suitable for 415 volt, 3-phase, 50 Hz with suitable foundation and
arrangement for incoming/ outgoing cable termination, earthing, locking
arrangement, insulated aluminium bus bars system, interconnection etc.
150 amps TP+N MCCB with following accessories:
Metering & Indication
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs.
Phase indicating light shall be protected by 6A MCB. - 1 Set
1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves
63A DP MCB -5 No.
25A FP MCB -2 No.
ESSENTIAL LIGHTING FEEDER PILLAR _ described as above Set 299116.91 1.00 299116.91
C ESSENTIAL LIGHTING FEEDER PILLAR
Design, manufacture, supplying fixing in position of outdoor type feeder pillar,
metal clade, suitable for 415 volt, 3-phase, 50 Hz with suitable foundation and
arrangement for incoming/ outgoing cable termination, earthing, locking
arrangement, insulated aluminium bus bars system, interconnection etc.
100 amps TP+N MCCB with following accessories:
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs.
Phase indicating light shall be protected by 6A MCB. - 1 Set
1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves
63A DP MCB -5 No.
25A FP MCB -2 No.
ESSENTIAL LIGHTING FEEDER PILLAR _ described as above Set 179700.17 3.00 539100.52
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
D BUILDING FEEDER PANEL
Design, manufacture, supplying fixing in position of the following front operated
cubicle type, front access, dead back, 2mm thick steel enclosed free standing,
dust and vermin proof, switchboard with IP52 protection with hinged and
lockable doors complete with interconnections, tinned copper/Al crimping lugs,
bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50
Hertz system, and suitable for a fault level of 35 kA symmetrical at 415 volts .
It should be complete with in all respects as per techinical specifications.
1No. 400 amps 4P 25 kA, Moulded Case Circuit Breaker with TM release
Digital electronic VAF meter with and 400/5 Amps 5 VA, CL 1 CTs . - 1 Set
Additional earth fault protection will be provided in all incoming MCCBs.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs.
Phase indicating light shall be protected by 6A MCB. - 1 Set
600 Amps 4 Pole 35 kA for 1 sec. Alumminium bus bars with heat coloured
shrinkable insulation sleeve. - 1 Set
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
6 No. 200 amps 4 Pole MCCB 25kA outgoing feeder.
1 No. 150 amps 4 Pole MCCB 25kA outgoing feeder.
2 No. 100 amps 4 Pole MCCB 25kA outgoing feeder.
BUILDIN FEEDER PILLAR-1_as described above. Set 272449.91 5.00 1362249.53
Supply of XLPE insulated, armoured heavy duty electric cable with aluminium
conductor, 1100 volts grade, cross-sectional area as follows
Supplying and laying of following size DWC HDPE pipe ISI marked along with all
accessories like socket, bend, couplers etc. conforming to IS 14930, Part II
2 complete With fitting and cutting, jointing etc-direct in ground (75 cm below
ground level) including excavation and refilling the trench but excluding sand
cushioning and protective covering etc.complete as required.
63 mm dia (OD-63 mm & ID-51 mm nominal) Mtr 255.55 870.00 222331.32
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
90 mm dia COD-90 mm & ID-76 mm nominal) Mtr 300.04 705.00 211529.80
120 mm dia COD-120 mm & ID-103 mm nominal) Mtr 461.73 90.00 41555.47
160 mm dia (OD-160 mm & ID-135 mm nominal) Mtr 497.66 770.00 383195.36
Laying of one number PVC insulated and PVC shethed/XLPE power cable of 1.1
3 KV grade of following size in the existing RCC/HUME/Metal pipe as required
Above 35 sq. mm and upto 95 sq. mm Mtr 58.97 705.00 41576.55
Above 95 sq. mm and upto 185 sq. mm Mtr 96.61 180.00 17390.06
Above 185 sq. mm and upto 400 sq. mm Mtr 138.64 770.00 106752.97
Supplying and making end termination with brass compression gland and
4 aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE
aluminium conductor cable of 1.1 KV grade as required.
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories,
and providing masonry enclosure with cover plate having locking arrangement Each 7092.38 9.00 63831.41
and watering pipe etc. with charcoal/ coke and salt as required,
Providing & fixing of 25mm x 5mm GI strip on surface or recess for earth
connection as required.
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop
earthing as required.
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and
salt as required.
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for
connections etc. as required.
G EXTERNAL LIGHTING
Supply, installation, testing and commissioning of the following lighting fixtures
& poles or approved equivalent:
SITC of Outdoor street light fixture with 45W LED complete with all accessories
Name Of Work: Construction of Residential complex/Family quarters including external development (Civi, plumbing and electrical) works for
Barsua, Kalta, Tensa Iron mines for SAIL, Odisha
Bill of Quantity (BOQ)
(DSR Description Unit Including Total Qty DSR Amount NDSR Amount
SITC of Outdoor Integrated all-in-one solar street light with pole and Lithium
Ferro Phosphate battery, solar panel and charger built into the luminaire.
Pressure die cast aluminium for sturdiness and long life. Specially designed
pole mounting bracket allows different tilt angles, lateral and pole top
mounting. SunStay has highest ever system efficacy of more than 175lm/w.
with all accessories as required. (50 W)
Supply Installation Testing Commissioning of GI 6.0 mtr octagonal Pole with
1200mm single Arm with inbuilt weather proof junction box including CC
foundation (1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone
aggregate 40mm nominal size) including excavation & refilling etc minimum
size 350mm x350mmx500mm with 300mm x 300mm x10 mm Base plate
including 4 Nos. heavy duty foundation nut bolts with suitable length as
required and complete in all respect as per direction of Engineer in Charge as
complete required
TOTAL OF EXTERNAL ELECTRICAL WORKS 1444590.39 10012278.11
aoc.pdf
Download all tender documents and submit your bid