Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹33.2 LAccepted-AOC | L-1 | Accepted-AOC lowest bidder for the work. | |
| 2 | L-2₹40.4 L+₹7.3 L (22.0%)Rejected-Finance | L-2 | Rejected-Finance other than the lowest bidder | |
| 3 | L-3₹42.4 L+₹9.2 L (27.8%)Rejected-Finance 84 A VIJAY NAGAR COLONY LALGHATI PO NAYAPURA BHOPAL 462032 | 462032 | L-3 | Rejected-Finance other than the lowest bidder | |
| 4 | L-4₹67.1 L+₹34.0 L (102.5%)Rejected-Finance | L-4 | Rejected-Finance other than the lowest bidder | |
| 5 | L-5₹67.1 L+₹34.0 L (102.5%)Rejected-Finance PLOT NO 07 KHASRA NO 26 28 SURAJ NAGAR GRAM SINGAL CHOLI AIR PORT ROAD BHOPAL MP | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L-5 | Rejected-Finance other than the lowest bidder |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
13 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Pawan Kumar CWE Bhopal
Headquarters, Commander Works Engineer, Bhopal, Military Engineer Services, SI Line, Bhopal, Pin Code - 462001 (Madhya Pradesh)
PROVN OF COVERED ACCN WITH SEPARATE DUST PROOF ENCLOSURE FOR BASE OVERHAUL OF ENGR EQPT AT BHOPAL
2024_MES_646395_1
83898/E8
Open Tender
Civil Works
Item Rate
270 days
BHOPAL
AS PER NIT CONDITION
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹1 L
Yes
4 May 2024
14 Mar 2024
15 Apr 2024
14 Mar 2024
13 Apr 2024
1 Apr 2024
14 Mar 2024 - 1 Apr 2024
Amount
GENERAL SUMMARY
Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule ‘A’ Part- I(A) (Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for BUILDING WORKS Schedule ‘A’ Part- I(B) (PEB) for Design, prepare structural drawing, fabrication, supply, transportation, and erection of pre-engineered building for Covered Accn, dimension 18500 mm X 12000 mm (c/c), divided into five (5) equal bays, minimum footing depth of 1500 mm, plinth height 450 mm from ground level, minimum clear height 5180 mm from plinth level upto bottom of gutter level, full openings on front & rear side with ramp, brick wall on both sides as per Plan of drawing No CWE/ARCH/16/2024 Sheet No. 3/3 dated 23 Jan 2024 (amended upto 01-03-2024) including RCC footings, RCC column below steel structures, anchor bolt, base plate, all structural steel items, roofing sheet of pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated (profile) steel sheet, gutter, rain water pipes, flashings, rainwater pipes, ramps, plinth protection etc complete all as specified, as shown drawings and as directed. Note: -The design and drawing shall be got vetted from any IITs/NITs/Government Engineering College.
Lump sum price worked out by the contractor for EXCAVATION AND EARTH WORK as listed in Schedule ‘A’ Part- II (Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule ‘A’ Part- III (Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS as listed in Schedule ‘A’ Part- IV (Ref prepriced schedule attached seperately)
SCH 'A' Pt - V (MISCELLANEOUS PARTS)
M & L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)
M & L for concealed point wiring for one 3 pin/5 pin 5 Amps socket outlet on same board with other switches complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)
M & L for concealed point wiring for one 3 pin/ 5 pin 5 Amps socket outlet on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)
M & L for concealed point wiring for one switch socket combination 6 pin 5/15 Amps on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 2.50 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 2.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)
S&F, Sheet metal enclosures for MCB, DB, VTPN 415 Volts 200 Amps rated bus bar, 4 way double door (Vertical DB with MCCB as incomer) factory made confirming to IS-13032 fabricated out of CRCA sheet not less than 1.2mm thick fitted with DIN channel, IP 43 protection class, neutral link and 200 amp 440 volts rated bus bar suitable for mounting 63/100 Amp MCCB as incomer, semi glossy finished with epoxy polyster based powder paint sprayed (RAL 9003) and baked at high temperature with anti rust conditioning protection against corrosive atmosphere including lable marking indicating the incoming and outgoing circuit complete all as specified and directed. Note:- Incomer MCCB and outgoing MCBs shall be measured and paid separately.
Supply and fixing, heavy duty, 600 mm sweep, 1400RPM wall fan, metal body complete with motor & blades and all required accessories for fixing/hanging Make - Havells Cat Pt No/Model No. fhacwstscl 24 or equivalent as approved by GE from 'List of Makes' complete all as specified and as directed.
S&F, LED 24 watt recess mounting light fitting (2x2 luminaire), with CRCA powder coated white, high power LEDs and aluminium front frame with flat white high power transmission acrylic cover including connecting with PVC insulated multistranded copper flexible cable 0.5 Sqmm two core and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified and as directed. Make - Orient Cat Pt No/Model No. LTRAQ-24-C or equivalent as approved by GE from 'List of Makes' complete all as specified and as directed.
S & F, voltage stabilizer for automatic operation, single phase naturally oil cooled indoor type & designed for input variation between 170 V to 250 V with accuracy ± 2.5% and of capacity 4 KVA complete all as specified and as directed.
S&F, LED high bay light with aluminium die cast housing of 80W, IP-65 rating Voltage input 140V to 280V efficacy 130Lm/W complete all as specified and directed.Make - Orient Cat Pt No/Model No. LHPNP-80-C or equivalent as approved by GE from 'List of Makes' complete all as specified and as directed.
Supply, installation and testing of Three phase Air Compressor of flow rate 17.32 CFM displacement air cooled air quality standard class I with tank capacity 300 Litres, maximum discharge pressure of 175 PSIG/12.33 KG/Sqcm connected with 5 HP motor including foundation as per manufacturer's instruction also including all standard accessories, tubing and fittings, etc complete all as specified and as directed. Make - INDO AIR/ELGI BAUER/ INGERSOL RAND.
City buildcom builders & devlopers
POONAM ELECTRIC INDUSTRY
Vee kay construction
Raja enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .