| 1 | Retro reflective overhead signage | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts and nuts at 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). - Overhead informatory road signage. | 250 | Sqm | Vivek Kumar 121001,ESIC Medical College andhospital NH-3,NIT Faridabad | 45 |
| 2 | Heat activated retro reflective sheet | Supply and fiing face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame on pipe orpillars or any any other reuired place, all complete as per Direction of Engineer - in - charge. | 20 | Sqm | Vivek Kumar 121001,ESIC Medical College andhospital NH-3,NIT Faridabad | 45 |
| 3 | | Providing and Fixing LED sign board of size 30ft x 4ft made of frame 40mm MS square pipe and fixed on 3 MM Aluminum Composite Panel (ACP) .LED letter made of 3D box type letter, the front portion of letters Will be hollow and the same will be covered with 2 mm thick. Acrylic plastic sheet with permanent fixing with adhesive or silicon System. The side projection of letters will be 2 inches with 2 Mm collars at front to hold the acrylic letter. Colours of LED Letter Will be as per Direction of Engineer - in - charge. The letters heights will Height of English Letter 24inch Inches written as Height of Hindi Letters 24inch written as (in devnagri script, kindly refer ATC document) fixed on ACP sheet. LED modules of (Make SAMSUNG) Required fixed inside acrylic letters as including transformers, cabeling and Timer with electric connection. Fixed With MS Pipe of 50 mm x 50 mm x 16 gauge, Frame supported with angle iron grouted on roof fixed height with with hilti, fastner and nut bolt as required, all complete as per Direction of Engineer - in - charge. | 1 | Job | Vivek Kumar 121001,ESIC Medical College andhospital NH-3,NIT Faridabad | 45 |
| 4 | LED sign board Big English | Providing and Fixing LED sign board of size 30ft x 4ft made of frame 40mm MS square pipe and fixed on 3 MM Aluminum Composite Panel (ACP) .LED letter made of 3D box type letter, the front portion of letters Will be hollow and the same will be covered with 2 mm thick. Acrylic plastic sheet with permanent fixing with adhesive or silicon System. The side projection of letters will be 2 inches with 2 Mm collars at front to hold the acrylic letter. Colours of LED Letter Will be as per Direction of Engineer - in - charge. The letters heights will Height of English Letter 18 inch written as (ESIC MEDICAL COLLEGE and HOSPITAL) fixed on ACP sheet. LED modules of (Make SAMSUNG) Required fixed inside acrylic letters as including transformers, cabeling and Timer with electric connection. Fixed With MS Pipe of 50 mm x 50 mm x 16 gauge, Frame supported with angle iron grouted on roof fixed height with with hilti, fastner and nut bolt as required, all complete as per Direction of Engineer - in - charge. | 1 | Job | Vivek Kumar 121001,ESIC Medical College andhospital NH-3,NIT Faridabad | 45 |
| 5 | LED sign board Small Hindi | Providing and Fixing LED sign board of size 50 ft x 5 ft made of frame 40mm MS square pipe and fixed on 3 MM Aluminum Composite Panel (ACP) .LED letter made of 3D box type letter, the front portion of letters Will be hollow and the same will be covered with 2 mm thick. Acrylic plastic sheet with permanent fixing with adhesive or silicon System. The side projection of letters will be 2 inches with 2 Mm collars at front to hold the acrylic letter. Colours of LED Letter Will be as per Direction of Engineer - in - charge. The letters heights will written as Height of Hindi Letters 30 inch written as (in devnagri script, kindly refer ATC document) fixed on ACP sheet. LED modules of (Make SAMSUNG) Required fixed inside acrylic letters as including transformers, cabeling and Timer with electric connection. Fixed With MS Pipe of 50 mm x 50 mm x 16 gauge, Frame supported with angle iron grouted on roof fixed height with with hilti, fastner and nut bolt as required, all complete as per Direction of Engineer - in - charge. | 1 | Job | Vivek Kumar 121001,ESIC Medical College andhospital NH-3,NIT Faridabad | 45 |
| 6 | LED sign board Small English | Providing and Fixing LED Logo of size 4 ft dia made of frame 40mm MS square pipe and fixed on 3 MM Aluminum Composite Panel (ACP) .LED letter made of 3D box type letter, the front portion of letters Will be hollow and the same will be covered with 2 mm thick. Acrylic plastic sheet with permanent fixing with adhesive or silicon System. The side projection of letters will be 2 inches with 2 Mm collars at front to hold the acrylic letter. Colours of LED Letter Will be as per Direction of Engineer - in - charge, fixed on ACP sheet. LED modules of (Make SAMSUNG) Required fixed inside acrylic letters as including transformers, cabeling and Timer with electric connection. Fixed With MS Pipe of 50 mm x 50 mm x 16 gauge, Frame supported with angle iron grouted on roof fixed height with with hilti, fastner and nut bolt as required, all complete as per Direction of Engineer - in - charge. | 1 | Job | Vivek Kumar 121001,ESIC Medical College andhospital NH-3,NIT Faridabad | 45 |
| 7 | Skill Lab Stencil LED sign board | Providing and Fixing In built Stencil LED sign board of size 90 inch x 18 inch fixed on 3 mm thick Aluminum Composite Panel (ACP) .LED letter in built 9 inch. The Led letters shall be fixed on ACP sheet. LED modules of (Make SAMSUNG) Required fixed inside acrylic letters as including timer transformers, cabeling with electric connection, all complete as per Direction. The LED board hanged with 2 stainless steel 304 seies pipe and fastner with 2 Stainless Steel 304 series plate Matter of LED sign board shall be as under, all complete as per Direction of Engineer - in - charge.
- SKILL LAB | 1 | Job | Vivek Kumar 121001,ESIC Medical College andhospital NH-3,NIT Faridabad | 45 |
| 8 | Gymnasium Stencil LED sign board | Providing and Fixing In built Stencil LED sign board of size 90 inch x 18 inch fixed on 3 mm thick Aluminum Composite Panel (ACP) .LED letter in built 9 inch. The Led letters shall be fixed on ACP sheet. LED modules of (Make SAMSUNG) Required fixed inside acrylic letters as including timer transformers, cabeling with electric connection, all complete as per Direction. The LED board hanged with 2 stainless steel 304 seies pipe and fastner with 2 Stainless Steel 304 series plate Matter of LED sign board shall be as under, all complete as per Direction of Engineer - in - charge.
- GYMNASIUM | 2 | Job | Vivek Kumar 121001,ESIC Medical College andhospital NH-3,NIT Faridabad | 45 |
| 9 | | Providing and Fixing LED letters 18 inch and 24 inch dia 2 nos Logos of ESIC and fixed on existing 3 MM Aluminum Composite Panel (ACP) on size 40 inch x 3 inch .LED letter made of 3D box type letter, the front portion of letters Will be hollow and the same will be covered with 1.50 mm thick. Acrylic plastic sheet with permanent fixing with adhesive or silicon System. The side projection of letters will be 1.50 inches with 1.50 mm collars at front to hold the acrylic letter. Colours of LED Letter Will be as per Direction of Engineer - in - charge. The letters heights will written as Height of Hindi Letters 16 inch written as (in devnagri script, kindly refer ATC document) and 2 LED logos of size 24 inch dia fixed on existing ACP sheet. LED modules of (Make SAMSUNG) Required fixed inside acrylic letters as including transformers, cabeling and Timer with electric connection all as required, all complete as per Direction of Engineer - in - charge. | 1 | Job | Vivek Kumar 121001,ESIC Medical College andhospital NH-3,NIT Faridabad | 45 |
| 10 | | Provinding and fixing transparent logos or Letters made out of etching tape on the glass of approved shape and sizes etc of required size as required as per , all complete as per Direction of Engineer - in - charge. | 20 | Sqm | Vivek Kumar 121001,ESIC Medical College andhospital NH-3,NIT Faridabad | 45 |
