REPAIR TO PLANKS FLOORING, STAIR CASES, TANK STAGINGS, VIEW CUTTER AND SS RAILING AND OTHER B/R WORKS IN ZONE B UNDER GE 864 EWS, JOB NO- TPP 2024-25

Amount

Dismantling of timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified.

M&L for second class hard-wood in scantlings wrought fixed in frame work complete all as specified.

Dismantling boarding, any description, fixed in any position with nails complete all as specified.

S&F 25mm thick second class hard wood boarding in flooring planed one side with butt joints and fixed with nails complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for mild steel framed work as in angle iron frames for manhole cover, staging and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for mild steel work as in angles, tee, flats and plates for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) in steps, jambs, pillars, window- cills, cooking platforms and like including rounding edges, laid over and including 15mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed.

S&F in repair wooden jallies as per pattern at site at vertical spacing of 75mm centre to centre including top, middle and bottom battens of second class clean swan soft wood fillets having cross sectional area exc 15 sqcm but n.exc 25 sqcm complete all as specified & directed.

M&L for preparing old decorated plastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of exterior emulsion paint (weather coat) of approved colour on walls with and including provision of scaffolding, ladder, cradles etc required for the treatment to external surface of building upto 3 storey with required safety measures complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S&F in repair 2mm thick plain fiber glass translucent opaque green sheet in wall cladding/gate/roofing etc fixed 75mm long MS screws bolt with hexagonal or square heads at one end with washer and 100mm side lap complete all as specified and directed.

S&F in repairs 2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugations side lamp fixed with 'L' or 'J' type hook or cranked bolt and washer in roof, wall cladding etc complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge thickness, including nanital or similar pattern roof covering complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specifieid and directed.

M&L for PCC (1:2:4), Type B-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

Demolition of plain cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

M&L for 60mm thick Machine pressed factory made Precast cement concrete interlocking paver blocks with using grey cement and no pigment of Grade M-35 of any size & shape confirming to IS 15658-2006 laid over and including sand cushioning & providing sub base of 50mm thick in PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate complete all as specified and directed.

M & L for Chequered cement concrete tiles with hard glazed finish rubber topping of size 30cmx30cmx22-25mm thick, with grey cement and no pigments set, jointed in neat cement slurry in floors laid over and including 20mm thick screed bed in cement mortar (1:6) & providing sub base of 75mm thick in PCC 1:4:8 type D-2, using 40mm graded crushed stone aggregate complete all as specified and directed.

S&F 10mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.

S&F 500 litres capacity rotational moulded polye-thylene water storage tanks three layers (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part I including dismantling old unserviceable water tanks complete all as specified and directed.

S&F 15mm bore steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F 2mm thick linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting complete all as specified and directed.

M&L for Endura coloured tiles of size 300x300x10mm thick confirmng to IS as in floors, set and jointed in neat cement slurry mixed with pigment to match the shade of tile fixed over and including 20mm thick screed bed in CM 1:4 complete all specified and directed.

D N ENTERPRISES (BID ID -3171115)

M/S PARVEZ AHMAD LONE (BID ID -3165223)

M/S NEW IQBAL ENTERPRISES (BID ID -3163237)