Repairs / Replacement of damaged parts of existing lubrication system along with allied works at Intake Sitlee

Repairs to lubrication system at Intake-I. Job includes dismantling of existing lubrication system of intake-I. Job includes fabrication of new lubrication manifold out of 65mm dia GI Pipe- 9 mtrs in length (approx.) at intake-I. Plugging in both the ends of the G.I Pipe to make the lubrication manifold. Fabrication and fitting MS Flanges 100mm dia-4 Nos, MS Bends 100mm dia-1 No. and M.S Flanges 65mm dia - 4 Nos. Fabrication and fitting of 4 Nos, G.I nipples of 20mm dia and 150mm in length on the 65mm dia G.I Pipe for lubrication of 4 Nos. VT Pumps installed at intake no I. Providing and fitting of 20mm dia ball valves at each end of the fabricated nipples on the lubrication manifold and shall further be connected to the stuffing box of the VT Pumps installed at intake no-I by special duty flexible connection rubber pipes for lubrication of the Pumps 1M in length. The delivery side of the Lubrication pump is to be connected with the lubrication manifold by way of cutting and welding. Providing and fitting of G.I Pipe 65mm dia 1.5 mtrs. in length for Suction sides of 2 Nos. lubrication mono block Pumps. Replacement of old G.I pipes 100mm dia with new G.I Pipes of existing lubrication gravity main 36 mtrs. in length of Intake-I&II by way of fabrication and fitting of M.S Flanges 100mm dia along with Nuts bolts and rubber sheets at each end of the G.I Pipe. Complete job includes cost of material and labour charges at site.