REPAIR REPLACEMENT OF CORRODED WATER PIPE LINE AT MD ACCN WAC LINE, OTM ACCN OF COD, MH AGRA AND VARIOUS LOCATIONS (W) AREAS UNDER AGE E/M (W) OF GE (WEST) AGRA

Amount

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep in soft/loose soil including forming sides and bottom surface to required levels/slops/gradients for laying of pipe etc. complete all as specified and directed . Note:- The disturbed surface of roads/paths/plinths etc. shall be repaired and quoted rates deemed to include this aspect.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in excavated soil complete all as specified and directed.

Removal of surplus excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and directed.

Disconnecting and taking up or down 100 mm bore old existing steel tubing and connections of any description/ grade and in any position in trenches/under floors / on walls etc including connected fittings/accessories and fixtures etc complete all as specified and directed

All as per item No.4 above but 80 mm bore complete all as specified and directed.

All as per item No.4 here in above but 50 mm bore complete all as specified and directed.

All as per item No.4 here in above but 40 mm bore complete all as specified and directed.

All as per item No.4 here in above but 25 mm bore complete all as specified and directed.

All as per item No.4 here in above but 20 mm bore complete all as specified and directed.

Refixing/ Relaying, jointing and testing 100 mm bore old galvanised iron water tubing in new or old position after cleaning by suitable chemical, roding, cutting to required length screwing ends and connecting with existing line etc as per site requirement with and including all new GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete laid in floors in trenches/under floor/under roads, or to walls and ceilings complete all as specified and directed Notes: (i) Old GI water tubing shall be reused obtained from item No. 4 herein before after cleaning if serveceable. (ii) Existing connections shall be redone with and including required size of Tee or MS clamp with rubber bush and quoted rates deemed to include this aspect.

All as per item No.10 above but 80 mm bore complete all as specified and directed. Note :- GI pipe retrieved from item No.5 here in before shall be used after cleaning.

All as per item No.10 above but 50 mm bore complete all as specified and directed. Note :- GI pipe retrieved from item No.6 here in before shall be used after cleaning.

All as per item No.10 above but 40 mm bore complete all as specified and directed. Note :- GI pipe retrieved from item No.7 here in before shall be used after cleaning.

All as per item No.10 above but 25 mm bore complete all as specified and directed. Note :- GI pipe retrieved from item No.8 here in before shall be used after cleaning.

All as per item No.10 above but 20 mm bore complete all as specified and directed. Note :- GI pipe retrieved from item No.9 here in before shall be used after cleaning.

Supply, laying, jointing and testing 100 mm bore galvanised iron water tubing 'medium grade' cutting to required length screwing ends and connecting with existing line etc as per site requirement with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete laid in floors in trenches/under floor/under roads,or to walls and ceilings complete all as specified and directed Notes: (i) Existing connections shall be done with and including required size of Tee or MS clamp with rubber bush and quoted rates deemed to include this aspect.

All as per item No.16 above but 80 mm bore complete all as specified and directed.

All as per item No.16 above but 50 mm bore complete all as specified and directed.

All as per item No.16 above but 40 mm bore complete all as specified and directed.

All as per item No.16 above but 25 mm bore complete all as specified and directed.

All as per item No.16 above but 20 mm bore complete all as specified and directed.

Taking up / down 100 mm bore of cast iron / ductile iron water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and receiving lead complete all as specified and directed.

All as per item No. 22 above but 150 mm bore complete all as specified and directed.

All as per item No. 22 above but 200 mm bore complete all as specified and directed.

All as per item No. 22 above but 250 mm bore complete all as specified and directed.

All as per item No. 22 above but 300 mm bore complete all as specified and directed.

Laying only 100 mm bore cast / ductile iron pipes retrived from item No. 22 here in bfore in same or new position in trenches after cleaning by suitable chemical, roding as per site requirement including existing connection with required size of Tee or MS clamp with rubber bush complete all as specified and directed.

All as per item No.27 above but 150 mm bore retrieved from item No.23 complete all as specified and directed.

All as per item No.27 above but 200 mm bore retrieved from item No.24 complete all as specified and directed.

All as per item No.27 above but 250 mm bore retrieved from item No.25 complete all as specified and directed.

All as per item No.27 above but 300 mm bore retrieved from item No.26 complete all as specified and directed.

M&L for 100 mm bore centrifugaly cast (spun) ductile iron pressure pipes for water mains with socket & spigot ends conforming to IS 8329/2000 any length for classification of K7 suitable for rubber gasket joint (push on type) with cement mortar lining inside the pipe with out side zinc coating complete all including existing connection with required size of Tee or MS clamp with rubber bush complete all as specified and directed. Note :- cutting of pipe, fitting for pipe, lead joints shall be measured and paid separately under respective items of Sch 'A'

All as per item No.32 above but 150 mm bore complete all as specified and directed.

All as per item No.32 above but 200 mm bore complete all as specified and directed.

All as per item No.32 above but 250 mm bore complete all as specified and directed.

All as per item No.32 above but 300 mm bore complete all as specified and directed.

M&L for push on tyton (rubber gasket) joints for 100 mm bore DI pipe complete all as specified and directed.

M&L for push on tyton (rubber gasket) joints for 150 mm bore DI pipe complete all as specified and directed.

M&L for push on tyton (rubber gasket) joints for 200 mm bore DI pipe complete all as specified and directed.

M&L for push on tyton (rubber gasket) joints for 250 mm bore DI pipe complete all as specified and directed.

M&L for push on tyton (rubber gasket) joints for 300 mm bore DI pipe complete all as specified and directed.

M&L for cutting existing cast iron pipes in position (comprising of two cuts) for insertion of new iron fittings (tees, branches etc) complete of the size 100 mm bore of pipe complete all as specified and directed.

M&L for cutting existing cast iron pipes in position (comprising of two cuts) for insertion of new iron fittings (tees, branches etc) complete of the size 150 mm bore of pipe complete all as specified and directed.

M&L for cutting existing cast iron pipes in position (comprising of two cuts) for insertion of new iron fittings (tees, branches etc) complete of the size 200 mm bore of pipe complete all as specified and directed.

M&L for cutting existing cast iron pipes in position (comprising of two cuts) for insertion of new iron fittings (tees, branches etc) complete of the size 250 mm bore of pipe complete all as specified and directed.

M&L for cutting existing cast iron pipes in position (comprising of two cuts) for insertion of new iron fittings (tees, branches etc) complete of the size 300 mm bore of pipe complete all as specified and directed.

M&L for road cutting for laying of pipe line and making good after laying to match with surrounding area with PCC 1:2:4 type B-1 using 20 mm graded stone aggregate for a depth of 30 cm from top and balance portion shall be filled with approved earth complete all as specified and directed.

Taking down of old unserviceable PVC stop valve S&F new GM gate valve ISI marked IS-778 screwed down for iron pipe or ferrule including fittings such as union, socket, nipple, chck nut etc of size 50 mm including cutting of existing GI pipe and fixing properly complete all as specified and directed.

All as per item No.48 above but of size 25 mm dia complete all as specified and directed.

All as per item No.48 above but of size 20 mm dia complete all as specified and directed.

M&L for repairs to leakage of cast iron pipe line 400 mm dia size including excavation earth work in any type of soil, burning out old lead, cleaning joint and filling with fresh pig lead and cocking to make joint leak free complete all as specified and directed.

All as per item No.51 above but of size 300 mm bore complete all as specified and directed.

All as per item No.51 above but of size 250 mm bore complete all as specified and directed.

All as per item No.51 above but of size 200 mm bore complete all as specified and directed.

All as per item No.51 above but of size 150 mm bore complete all as specified and directed.

All as per item No.51 above but of size 100 mm bore complete all as specified and directed.

All as per item No.51 above but of size 80 mm bore complete all as specified and directed.

M&L for 300 mm x 300 mm size 'D' joint made out of CI collar and rubber ring complete all as specified and directed.

M&L for 250 mm x 250 mm size 'D' joint made out of CI collar and rubber ring complete all as specified and directed.

M&L for 200 mm x 200 mm size 'D' joint made out of CI collar and rubber ring complete all as specified and directed.

M&L for 150 mm x 150 mm size 'D' joint made out of CI collar and rubber ring complete all as specified and directed.

M&L for 100 mm x 100 mm size 'D' joint made out of CI collar and rubber ring complete all as specified and directed.

M&L for 80 mm x 80 mm size 'D' joint made out of CI collar and rubber ring complete all as specified and directed.

S&F cast iron fittings for spigot socketed pipe like bends (any type radius and angle) tapers any type (straight, bend, increasing decreasing or double socket etc). Tee pieces single branch 'Y' junction double branch cross ( all socketand spigot) collars caps and plugs etc suitable for pipe line up to 400 mm bore complete all as specified and directed.

S&F ductile iron fittings for spigot socketed pipe like bends (any type radius and angle) tapers any type (straight, bend, increasing decreasing or double socket etc). Tee pieces single branch 'Y' junction double branch cross ( all socket and spigot) collars caps and plugs etc suitable for pipe line up to 400 mm bore complete all as specified and directed.

M&L in repairs 80 mm bore cast iron sluice valve both ends flanged PN-1.0 with iron wheel ( ISI marked including nut, bolts, washer and 3 mm thick rubber insertion sheet complete al as specified and directed.

All as per item No.66 above but size 100 mm bore complete all as specified and directed.

All as per item No.66 above but size 150 mm bore complete all as specified and directed.

S&F in repairs of spindle of sluice valve 200 mm bore (stainless steel) including check nuts made out of stainless steel complete all as specified and directed.

All as per item No.69 above but 150 mm bore complete all as specified and directed

All as per item No.69 above but 100 mm bore complete all as specified and directed

All as per item No.69 above but 80 mm bore complete all as specified and directed

M&L for fiber base FAB media for development of bacterias round in shape / hexagonal devided in multi layers to increase the surface area of media (as per sample) (MBBR Media MOC-P/P-HDPE-Virgin) complete all as specified and directed.

M&L for tube settler media MoC-HDPE, Hight 844 m complete all as specified and directed.

M/s S.M. Construction

C P Singh and Co

Jai Kali Maan contractor

Balaji Associate

jmd engineers

M/S A.A.DRILL.EXPERT