81692REPAIR AND RESURFACING OF ROAD IN PATCHES UNDER ZONE C AREA AT NDA KHADAKWASLA.

Amount

Surface dressing n exc. 15 cm deep in soft / loose soil, including removing of shrub, grass vegetation etc complete all as specified and as directed.

Scarifying and picking gravelled macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and in n exc 50 mm in depth and removing the same to a distance n exc 50 m and staking complete all as specified and as directed.

Scarifying and picking gravelled macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and in exc 50 mm and n exc 100 mm in depth and removing the same to a distance n exc 50 m and staking complete all as specified and as directed.

M&L for Water Bound Macadam (WBM) 7.5 cm (compacked thickness) with coarse aggregate of grading (63 to 40 mm size) spread, rolled and consolidated to gradient and camber required with granite trap or basalt type aggregate 8 to 12 ton power roller complete all as specified and as directed.

M&L for preparing surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bitumen (VG-10 grade ) @ 10.0 kg per 10 sqm complete all as specified and as directed.

M&L for preparing surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bitumen (VG-10 grade ) @ 5.0 kg per 10 sqm complete all as specified and as directed.

M&L for Premix bituminous macadam design mix not exc 75 mm thickness (consolidated thickness) with 4 % binder content by weight of total mix using bitumen VG-30 laid, rolled and compacted to required gradient and camber with 8 to 12 tonne capacity power roller by using hot mix plant & mechanical paver complete all as specified and as directed.

M&L for providing and laying bituminous premixed semi dense asphaltic concrete 30 mm thick (consolidated thickness) with 5.5% paving bitumen of grade VG-30 , binder content by weight of total mix , rolled and compacted to required gradient & camber using 8 to 12 tonne power roller complete all as specified and directed. Note : Contractor shall submit the authenticated weight batch receipt as per load material in site duly marked vehicle No.

M&L for repair to pot holes any depth, n.exc. 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road paths etc, cutting around edges to at least 25 mm in depth making good by filling in screened and graded road metal applying tack coat with Bituminous primer (of bitumen grade VG-10) @ 5 kg per 10 sqm, putting in bituminous (of bitumen grade VG-30) pre-mix asphaltic semi dense concrete (design mix) 25 mm (consolidated thickness) with 5.5% binder content by weight of total mix, laid with mechanical paver, rolled and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and as directed.

M&L for moorum or red bajri filling as in erode edges of roads below the berm area, laid in layers n exc 15 cm thick each layers spread, levelled and rammed including watering and compacted as specified and as directed.

M&L for moorum or red bajri (spread thickness 100 mm thick) spread, rolled, watered and consolidated to gradient and camber required as in side berms complete all as specified and directed.

M&L for providing through special applicator machine, auto retro-reflective thermoplastic road marking paint in yellow/white, pattern of specified strip, 3.00 mm thick and 100 mm wide, centre line, stop line dashes arrow, brackets similar work on bituminous / cement concrete road surfaces as per IRC pattern including cleaning of road surface free from dust & moisture and putting in duly mixed with 8% mica sign special applicatore machine complete all as specified and as directed.

All as per item No 12 here- in- above but exc 100mm wide for marking of speed brackers and similar marking complete all as specified and directed.

S&F in repair, Solar studs of width 122.5mm length 132.5m, height with stump 55mm, stump dia 26mm electronically operated with solar cell LED PCS ,Ni-cd 1400 AH batery with aluminium main frame,bottom frame aluminium , reflective in two opposite direction and fixed in road surface as per manufactures instructions or complete all as specified and directed.

S&F in repair, Cats eye (Road struds) white/red colour reflectors,ABC Body, size 90x110x70 mm thick with both side reflector and fixed with epoxy resin as dhesive on bituminous surfaces complete all as specified and directed.

R K Enterprises

Sunshine Ventures

OM GANESH CONSTRUCTION