REPAIR TO GARBAGE BINS, AREA DRAINAGE, PATHWAY, HARD STANDING ETC IN SOUTH ZONE OF MIL STN PATIALA UNDER GE(S) PATIALA.

Amount

Excavating in post holes (or similar holes) each n exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, complete all as specified and directed by Engr-in-charge.

Dismantling posts or struts (wood,steel,or RCC) any section, including taking out embedded portion including demolition of concrete foundation and removal of waste material and making good disturbed ground complete all as directed.

M & L for PCC 1:3:6, type B-1, using 40mm graded stone aggregate as in foundation for post holes complete all as specified and directed by Engr-in-charge.

S F Joist, channel, angle, or tee sections, fixed independently, without connecting plates,Gde Fe-410-S as in fencing post / struts incl necessary flat iron,10mm dia MS round bars,drilling holes and binding etc. complete all as specified and directed.

Framed work as in doors or gates of angle or other section as in repairs with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, including taking down existing gate complete all as specified and directed.

Dismantling Chain link fencing of any size and any dia of wire, complete all as specified and directed.

S&F in repair Plain mild steel wire 4mm dia, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured), including dismantling old plain wire as in fencing of any description and in any position any dia, including cutting of shrubs / grass etc alongwith fencing upto 1.0 meter either side of fencing for working, complete all as specified and as directed.

M&L for Preparing ends of steel posts as in fencing and treated with coal tar or coal tar black paint area tarred, exc 0.10 Sqm but not exc 0.50 Sqm complete all as specified and directed.

Preparing new steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-charge.

Excavation in trenches in soft / loose soil not exceeding 1.50m wide and not exc 1.50m in depth incl getting out and taking out sludge from drains etc, complete all as specified and directed

Removing excavated material (soils & sludge) exc 250m but not exc 500m and deposited at a level not exc 1.50m high from base, complete all as specified and directed

M & L for PCC 1:3:6, type B-1, using 20mm graded stone aggregate surface channels & drain, complete all as specified and directed by Engr-in-charge.

Demolition of Brick work including all quoins and arches pillars etc built in cement mortar or cement lime mortar and removal of unserviceable material from site complete all as specified and directed.

M&L for brick work in cement mortar (1:4) using sub class 'B' old size bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified and directed

Brick work using sub class B old size bricks built in cement mortar 1:4 straight or curved on plan exceeding 6 m mean radius (as in half brick thick walls etc.) complete all as specified and as directed.

Flush pointing to brick work as in darins etc., in cement mortar (1:3) complete all as specified.

Extra for forming fair finish to drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds/mitred stopped ends etc. complete all as specified.

Cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in copings ,kerbs, bed plates etc., with slightly rounded or chamferred angles & throating, complete all as specified and directed/

Taking down cement plaster or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removal of debris from site complete all as specified and as directed

M & L for rendering 15mm thick cement plaster in cement mortar 1:6 on fair faces of brick or concrete surfaces on walls etc, finished even and smooth without using extra cement, complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of walls etc and applying two coat of cement base paint over a coat of chalk whiting (as primer) complete all as specified and as directed.

Dismantling of cement concrete tiles/ paver blocks of any description as in floorings, paths etc., laid dry, laid flat complete all as specified and as directed.

Demolition of cement cocrete of any description and in any position not otherwise specifically provided for, including removal of debris from site, complete all as specified and as directed by Engineer in charge.

M & L 75 mm thick PCC 1:4:8, type D-2, using 40mm graded stone aggregate as in foundation, mass filling or sub base of foors complete all as specified and directed by Engr-in-charge.

M &L for Rubber moulded Machine pressed precast concrete interlocking paver block(available in different colour for making patterns) any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with gray cement and pigment laid over 25mm thick sand cushioning complete all as specified and directed.

M &L for Rubber moulded Machine pressed precast concrete interlocking paver block(available in different colour for making patterns) any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 Grade with gray cement and pigment laid over 25mm thick sand cushioning complete all as specified and directed.

All as per serial item No 25 here-in-before but except tiles/ paver blocks i.e., using old serviceable tiles/ paver blocks retrieved from item No 22 here-in-before complete all as specified.

Preparing new or old surfaces (incl removal of old paint/ any other treatment ) of concrete and applying two coats of exterior emulsion paint over a coat of cement primer complete all as specified and as directed by Engineer in charge

Chequered cement concrete tiles With mixture of white and grey cement in equal proportion and no pigments, machine pressed, of size 20cm x 20cm x 25mm thick or any larger size upto 30cm x 30cm x 25mm as approved by Engineer in charge laid over 20mm thick cement screed in CM 1:4, complete all as specified and as directed

Cement concrete 75mm thick 1:2:4 type C-1 using 20mm graded crushed stone aggregate as in floors pavings etc finished even and smooth without using extra cement complete all as specified and directed.

Supply only MS Galvanized chain link fencing, any size or any type, complete all as specified and directed.

Fixing only chain link fencing including line, wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, complete all as specified and directed.

Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending and binding, complete all as specified and directed.

Arneja Builders

M/S RAJ KUMAR GUPTA

m/s panchmukhi builders

AR CONSTRUCTIONS

M/S Mukesh Kumar Gupta

K B Enterprises

Buttar Construction Co.