SPECIAL REPAIR OF BOUNDARY WALL OF 13 RA LINES UNDER GE (NORTH) MEERUT CANTT

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified & directed.

M&L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified & directed. Note :- Old serviceable bricks retrived from demolition shall be re-used under this item.

M&L for brick work with fly ash old size bricks straight or curved on plain exc. 6m mean radius built in CM 1:6 complete all as specified & directed.

Excavating in trenches, n. exc 1.5m wide and n. exc foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out complete all as specified & directed.

Returning filling in including spreading, levelling, watering & well ramming in layers n.exc 25cm in any type of soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

M & Lfor PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M & L for RCC M-20 (1:1.5:3) type A-1, (using 20 mm graded stone aggregate) as in column footing including raft footings, foundation, plinth beam, bases of columns etc. complete all as specified and directed.

M & L for RCC M-20 (1:1.5:3) type A1 (using 20 mm graded stone aggregate) as in beams, cantilevers, lintels over 1.5m span complete all as specified and directed.

M & L for RCC M-20 (1:1.5:3) Type A1 (using 20 mm graded stone aggregate) as in colums, pillars etc complete all as specified and directed.

Use and waste form work to sides of concrete foundation, footing, bases of columns, plinth beam, side and soffits of plinth beam and similar works in vertical or to batter of fair finished flat surfaces complete all as specified and directed.

Use and waste form work Square, rectangular or polygonal to sides of columns, pillars etc. of fair finished flat surfaces complete all as specified and directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) 0.9mm dia complete all as specified and directed.

All as per Item No 14 above but 5mm dia and over upto and incl 10 mm dia as in Binders,stirrups,spacer all as specified complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

M & L 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface using water proofing compound @ 3% by weight of cement content or as per manufacturer's instruction complete all as specified and directed. Note :- integral WPC shall be measured and paid separately.

M&L applying two coats of cement based paint over a coat of primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

S&F Mild steel work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars for doors, balusters, nosing to steps including embeding in concrete and screws etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron filets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

M/L preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint incl one coat of red oxide primer complete all as specified and directed.

S&F in repair galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of stanadard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed.

M& Lfor providing precast cement concrete louvres and jallies 35mm thick (measured solid) for set in cement mortar 1:4 in PCC 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) including all moulding but excluding frame shall be measured separatly and paid.

M&L for 18-20mm thick black granite stone slab machine cut in cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including rubbing, grinding and polishing complete all as specified & directed.

M&L mild steel framed work as in doors or gates (Ornamental type where required) of angle or other section with gusset plates, rails, braces, ball bearing etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings incl guard bars/hold fast etc ( exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing complete fe290(Gde E-165) quality A complete all as specified and directed.

Demolition of cement concrete of ground floor and pavings exc 15 cm in depth in any position nototherwise specifically provided for complete all as specified & directed.

M&L Hardcore of guage n.exc 63mm , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M/L for 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base complete all as specified & directed.

M&L Sand for cushioning, including spreading and levelling in layers n exc 25 mm thick complete all as specified & directed.

M&L60mm thick M-35 grade coloured interlocking tile any shape & size with grey cement & pigment conforming to IS 15658-2006 over sand cushioning, ineterlocking tiles jointd filled with sand complete all as specified & directed. Note :- Sand cushioning shall be measured & paid seperately.

Mild steel, plain, black sheet 1mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

Shri Kanchan Engineers (BID ID -3297475)

A.V. ASSOCIATES (BID ID -3293724)

m/s gupta construction (BID ID -3294180)

Madan Lal Jain and Sons (BID ID -3299311)

Punit Jain (BID ID -3295672)

Gupta Automobiles (BID ID -3294400)