REPAIR OF SUNKEN FLOOR LEAKAGE SEEPAGE JOINERY FALSE CEILING AND RENOVATION OF TOILET AND KITCHEN ETC OF DGQA OFFRS MD ACCN UP TO G6 STORY AT AMAR VIHAR AND OTM ACCN OF 21 SIGNAL GP AT ANAND PARBAT IN AOR OF AGE BR II UNDER OF GE NORTH DELHI CANT

Amount

Preparation of old surface after complete removal of existing treatment applying 1mm thick wall care putty and making the surface smooth and applying two coat of oil bound distemper complete all as specified and directed. Note:- OBD shall be done with roller of required size instead of brush

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed. Note:- OBD shall be done with roller of required size instead of brush .

M&L for complete removal of existing treatment and and applying two coats of plastic emulsion paint over 1mm thick wall care putty complete all as specified and directed Note:- Plastic emulsion paint shall be done with roller of required size instead of brush

M&L for two coats of oil bound distemper on surface of ceiling including preparation of old plastered surface complete all as specified and directed.

M&L for preparation of old decorated external wall surface by sand paper of required sizes, filling in wall care putty in holes existing or created, again sand papering thus making surface smooth and one coat of cement base paint complete all as specified and directed.

M&L for preparation of old decorated external wall surface by sand paper of required sizes, filling in wall care putty in potholes existing or created, again sand papering thus making surface smooth and two coats of cement base paint complete all as specified and directed.

M&L for preparation of old decorated external wall surface by sand paper of required sizes, filling in wall care putty in potholes existing or created, again sand papering thus making surface smooth and one coat of weather proofing exterior acrylic emulsion paint complete all as specified and directed.

M&L for preparation of old decorated external wall surface by sand paper of required sizes, filling in wall care putty in potholes existing or created, again sand papering thus making surface smooth and two coats of weather proofing exterior acrylic emulsion paint complete all as specified and directed.

M&L for two coats of White/ colour wash on surface of wall including preparation of old plastered surface complete all as spd and directed.

M&L for one coat of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise described over 10 cm width or grith complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise described over 10 cm width or grith complete all as specified and directed.

Demolition of brick work including all quoins, arches, pillars, etc built in cement mortar.

M&L for brick work in CM (1:6) straight or curved on plan exc 6.0m mean radius and using old size sub class 'B' bricks all as specified.

All as per the description of srl item No 13 above but except bricks

M&L for brick work with sub-class "B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and as directed.

S&F PVC(SWR) pipes, 75mm external dia double socketed in any length with rubber joints, fixed to walls etc with MS clamps including dismantling of cast iron, AC / PVC pipes including all fittings and accessories of 100/75mm dia and in any position complete all as specified.

S&F PVC (SWR) bends suitable for 75mm external dia with or without access door complete all as specified

S&F PVC (SWR) junction single, (single T&Y) equal or unequal with or without access door confirming to IS: 14735, suitable for PVC soil waste discharge pipe of 75mm dia complete all as specified and as directed.

S&F PVC (SWR) pipes, 110mm external dia, type-B, ISI marked (IS:13592) double socketed in any length with rubber ring joints, fixed to walls etc with MS clamps including dismantling of cast iron, AC / PVC pipes including all fittings and accessories of 100/75mm dia and in any position complete all as specified.

S&F PVC (SWR) bends suitable for 110mm external dia with or without access door complete all as specified

S&F PVC (SWR) junction single, (single T&Y) equal or unequal with or without access door confirming to IS: 14735, suitable for PVC soil waste discharge pipe of 110mm dia Complete all as specified and as directed.

S&F PVC (SWR) vent cowl, 110mm bore complete all as specified and as directed.

S&F in 75mm bore cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed in wall /floors complete and including dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F in 100mm bore cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints lfixed in wall /floors complete and including dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75mm bore cast iron nahani trap with greating including jointing to waste pipe fixed in cement concrete type B -1 (1:2:4) complete all as specified and directed.

S&F 100mm bore cast iron nahani trap with greating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and directed.

S&F in repairs ciphon for composit pattern including necessary fittings complete all as specified and directed.

Taking down cement or cement plaster on brick walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

M&L 15mm thick rendering on brick or concrete surface in cement mortar 1:4 mixed with liquid water proofing compound, surface finished even and smooth without extra cement complete all as specified and as directed. Note:- The cost of liquid WPC is deemed to be included rate against this item.

M&L for rendering 10mm thick in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement

M&L 10mm thick rendering on concrete surface of ceiling in CM 1:3 finished the surface even and smooth w/o using extra cement

Preparing new plastered surfaces of walls and applying two coats of Cement base paint, over a coat of alkali resistant priming paint complete all as specified

Preparing new plastered surfaces of walls and applying two coats of oil bound distumper over 2mm thick wall care putty over over a coat of primer complete all as specified and directed

Preparing new plastered surfaces of ceiling and applying two coats of oil bound distumper over 2mm thick wall care putty over over a coat of primer complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L non skid ceramic tiles colored tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed.

M&L non skid ceramic tiles colored tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM 1:6 complete all as specified and directed.

M&L glazed ceramic coloured tiles 300mm x 200mm x 7mm thick in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Vitrified designer glazed coloured tiles 8-9mm thick (square/rectangular), area of each tile n. exc 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L glazed digital vitrified tiles (DVT) colour and shed as approved in vertical surface of size 450x300x7-8mm thick with highlighter set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including rendering 10mm thick in CM 1:4 and finished rough, complete all as specified and directed.

M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match including moulding chamfered edges and driling holes to the gas pipes with shade of granite including dismantling, complete all as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and as directed.

M&L for plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved).

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in subase of floor, complete all as specified and directed.

M&L sand filing under floors or in foundations including watering and consoldation.

M&L for machine pressed precast concrete interlocking paver block of colour Red/Yellow glossy type any shape and size, as approved by Engr-in-Charge conforming to IS 15658-2006 of 60mm thickness, M-35 Grade over 40mm thick sand cushion with pigment all as specified.

M&L coloured chequerred cement concrete tiles 30cm x 30cm x 25mm thick machine pressed set jointed and pointed with grey cement & pigments in neat cement slurry in floors set in 15mm thick CM 1:6 including filling joints withwhite or colour cement as directed.

M&L cement concrete 1:2:4 type B1 (20mm graded crushed stone aggregate in lintels upto 1.5 m clear span cills, holdfasts, steps, seismic and other similar bands, plinth courses, string courses lacing courses parapets and railings upto 60 cm in height copings, kneelers apex stones, bed plates, kerb not provided for water troughs and the like including weathering slightly rounded or chamfered angles and throating.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of wooden/steel n.exc 1.5 sqm.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of wooden/steel exc 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed.

Taking down shutters exc 1sqm but not exc 2 sqm each and all as directed.

S&F aluminium powder coated three track window (two shutters glazed & one shutters wire gauge) with frame, glazed with 4mm thick tinted glass and wire guage with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below:- (a) Frame (top & side) section shall of size 92.00mm x 31.75mm x 1.50mm. (Section No 21447) (b) Frame (bottom) section shall of size 92.00mm x31.75mm x 1.50mm. (Section No 21446) (c) Top & side members of shutter section shall be of size 18.00mm x 40.00mm x1.50mm. (Section No 21455) (d) Interlock Section of Shutter shall be of size 18.00m x 40.00mm x 1.50mm. (Section No 21454) (e) Bottom Members of shutter section shall be of size 18.00mm x 40.00mm x 1.50mm. (Section No 20844), Note - The unit rate quoted by contractor includes cost of glass, wire mesh and all other connected accessories , complete all as specified and directed. .

S&F aluminium powder coated three track window (two shutters glazed & one shutters wire gauge) with frame, glazed with 4mm thick tinted glass and wire guage with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc. Note - The unit rate quoted by contractor includes cost of glass, wire mesh and all other connected accessories , complete all as specified and directed.

S&F aluminum anodised powder coated frame for doors, windows, vantilator with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

M&L 30mm thick, plain framed, flush shutters with block board core and plywood face panel , commercial type both sides complete all as specified and directed.

S&F 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc,all as specified and directed.

S&F steel windows with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing/gauging bars, dovetailed or welded.complete all as specified.

S&F galvanised mild steel wire cloth cut to size, 0.56mm nominal dia wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple complete all as specified .

S&F in repairs galvanised mild steel wire clothcut to size, 0.56mm nominal dia wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple complete all as specified .

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden painted surfaces including preparation of surfaces of any description not otherwise described over 10 cm width or grith complete all as specified and directed.

S&F solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, Supplying & fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement.

Hacking out old broken glass (any thickness, size, quality or discription) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 Sqm each pane complete all as specified and as directed.

S&F in repairs for gypsum ceiling board for ceiling prepainted, perforated finish, 600mm x 600mm x 9mm to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600mm x 600mm, made out of 0.5mm thick G.I. tee 32mm x 24mm for main, 25mm x 24mm for cross tee and 20mm x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2mm thick G.I. Suspension wires spaced at 1200mm on main runners including making niches for fans/light, including dismantling of wall ceiling and boards, (fibere pulp, insulation etc or insulation boards of any thickness including cover fitllets. all as specified and directed.

Taking down 15mm dia steel tubing and connection including cleaning for refixing or removal to store complete all as specified

Taking down 20mm dia steel tubing and connection including cleaning for refixing or removal to store complete all as specified

M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm complete all as specified.

S&F steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm complete all as specified.

Cutting chases, pinning in. makinggood to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S&F in repairs 500 ltrs capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted of three layer and fixed in position including dismantling existing water tanks and removing to stores etc all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes complete all as specified and as directed.

S&F ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20mm bore, fixed in repairs.(Min Wt 20mm- 210 gms) complete all as specified and as directed.

S&F in repairs ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 15mm bore, fixed in repairs.(Min Wt 20mm- 210 gms) complete all as specified and as directed.

S&F in repairs oval wash basin white, flat bottom (sample as in MAP offrs accn) including brackets, waste fitting 32mm dia brass chromium plated push type coupling with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, padestal patern size 550mm x 400mm including chain, plug brackets, waste fitting 32mm dia, brass chromimium plated for glazed ware sink, basin,with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified.

S&F in repiars white composite pattern vitreous china wash down water closet pan with P trap or S trap (pedestal pattern, model "Gemma/Rosehip" of any colour, twin flush system including soft close seat cover all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with dual flush type‘ white’ with inlet, float valve including bracket with 32mm dia PVC waste/flush bend pipe appx 600mm long complete all as specified and directed.

S&F in repairs EWC seat cover black/white colour as approved of PVC closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs CP hand spray (health faucet with 1.5m long easy flexible tube in chrome finish and wall hook) complete all as specified and directed.

S&F chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed

S&F in repairs of quarter turn bib tap with wal flange for iron pipe of size 15mm bore chromium plated all as specified and directed.

S&F in repairs chromium plate tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs plate rack made of stainless steel, 600mm x 750mm x 0.55mm including fixing as per manufacturer's instructions complete all as specified.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F corner glass sheet assembly consisting of 5.5mm thick sheet glass corner 45 cm wide both corner with chromium plated bracket guard and railing (with bracket) complete all as specified and directed.

S&F in repairs 15mm bore CP sink mixer (wall mounted) with min 190mm long swivel spout, connecting leg and wall flange, complete all as specified and directed.

S&F brass CP centre hole mixer without pop up waste system 15mm bore for mixing hot & cold water screwed down for iron pipe for wash hand basin complete all as specified and directed.

S&F in repair CP angle valve, high pressure, screwed ends for iron pipe or for unions of 15mm bore complete all as specified.

S&F in repairs CP wall mixer with provn for over head showers with 115mm long bend pipe on upper side connecting legs and wall flanges, complete all as specified.

S&F CP towel rack with 3 nos hooks, 600mm long superior quality fancy type as approved by EIC complete all as specified and directed.

S&F in repairs mirror cabinet PTMT of 400mm x 500mm with magnatic locking arrengment fixed with and including wooden plug with CP brass screw complete all as specified and as directed.

S&F in repairs shower rose fancy type bass chromium plated 125mm heavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unions complete all as specifed and directed .

S&F in repairs nozzle type PVC connection pipe 600mm long and15mm dia with brass fly nut at both ends complete all as specified and directed.

S&F in repairs CP stainless steel connection pipe 600mm long pemimum qualilty for geyser, urianal, WHB etc complete all as specified and directed.

S&F in repairs CP towel ring complete all as specified and directed.

S&F in repairs CP toilet paper holder with cover complete all as specified and directed.

S&F in repairs 32mm dia bore low density polyethylene pipes (LDPE)of pressure rating 6kgf/cm2 fixed complete to walls, ceilings or in floors etc for WHB and sink complete all as specified and directed.

S&F in repairs 2 in 1 angle valve 15mm CP fancy pattern type cast copper alloy screwed for iron pipe or forbrass ferrule and fixed all as specified and as directed

S&F in repairs chromium plated jet for WC with 1.00m long PVC pipe including necessary fittings complete all as specified and directed.

M&L for 18mm thick PVC sheet for kitchen cabinet and cubboard consisting of carcass one side decorative lamination and other side balancing white fixed with approved adhesive and self tapping screws for kitchen cup board or wardrobe including dismantling of old boarding of any type complete all as specified and directed

S&F for 20mm wide & 1mm thick PVC edge beading pasted to edges of PVC furniture with suitable adhesive for kitchen cup board or wardrobe complete all as specified and directed

S&F stainless steel handle 100mm fancy type for cub board shutter complete all as specified and directed

S&F continuous (Piano) hinges, brass, 30mm width of flaps (when open).

S&F soft close heavy duty slow motion hinge steel nickel plated, 4 hole mounting plate, half overlay adjustment height/ depth fixed in repair completed all as specifed and directed.

S&F soft close heavy duty steel nickel plated telescopic drawer channel size 20 inch full extension load capacity 50Kgs including fixing arrangement to drawer/ baskets etc completed all as specified and directed.

S&F in repairs soft close heavy duty steel nickel plated telescopic drawer channel size 20 inch full extension load capacity 50 Kgs including fixing arrangement to drawer/ baskets etc completed all as specified and directed.

S&F mild steel magnetic catches and striking plate of 50mm size for kitchen cup board or wardrobe fixed with screw including letting in and fixed completed all as specified and directed.

M&L Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as door chowkhat, grills, gratings, ladder, hinges, door frame, desert cooler stand etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings, coolar stand and similar work completed all as specified and directed.

M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces completed all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipes of capacity exceeding 250 ltrs and not exceeding 500 ltrs including by flushing out water, scrubbing with brushes cleaning with concentrated hydro chloric acid or caustic soda etc complete & finally washing with fresh water, including Marking or proper date of cleaning with white paint in 50mm of size of font with stencil over a coat of black paint completed all as specified and directed.

All as per the descripion of srl item No 116 above item above but size exceeding 500 ltrs not exceeding 1000 ltrs

S&F in repairs door bottom seal (with metal strip and nylon brush) complete all as specified

S&F in repairs fancy type stainless steel curtain rods powder coated polished 20mm dia including brackets and finale and connected items complete all as specified and directed.

S&F SS butt hinges medium weight cold rolled 100mm long complete all as specified and directed.

S&F stainless steel tower bolt of extruded section and fixed lengtth of bolt 150mm.

S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified.

S&F 250mm long stainless steel sliding door bolt , complete all as specifid and as diredted

S&F in repairs sinks with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,including sink coupling, 40mm waste fitting overall size 1040mm x 510mm bowl size 510mm x 405mm x 203mm complete all as specified and as directed.

S&F in repairs stainless steel peg set of six sutable size of length complete etc.

S&F in repairs gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe of 20mm dia, all as specified and directed

S&F in repairs Waste coupling( kitchen sink/WHB), 32mm dia, of PTMT (half or full threaded) complete all as specified.

S&F in repairs PVC waste pipe 800mm long suitable for 32mm dia waste coupling complete all as specified.

Demolition of cement concrete( sunken portion) in any of description and in any position not other wise specially provided, all as directed and specified.

M&L in preperation of existing sunken portion cleaning, wire brushing removing all unwanted material, filling of loose masonary, joints hollow portion with polymer modified cement mortars & applying Ist coats of smart care Damp Block 2K of Asian paint or equivalent ( as per manufacturer's instructions) @1.5 Kg/sqm ( for two coat) over necked surface, laying of a 150mm wide strip of an open woven glass fiber mesh at the junction and corners over green surfaces of smart care of asian paints or equivalent. Applying IInd coat of smart care Damp Block 2K after 4-6 hrs gap of Ist coat . Sprinkle coarse sand over IInd coat for proper bonding of cement plaster, complete all as specified and directed .

M&L lime concrete with 40mm brick aggregate in lime mortar 1:2 complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (40mm graded crushed stone aggregate) in sub base of floor complete all as specified and directed.

M&L PCC 1:2:4 type B1, (20mm graded crushed stone aggregate) in roof slab or in sunken portion as levelling course using liquid WPC comlete all as specified and directed Note:- The cost of liquid WPC is deemed to be included in quoted rate against this item.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

S&F in repairs steel work in tubler trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 including dismantling old rafter/ post/purlin etc. complete all as specified and direcred.

Dismantling of old stone broken/cracked stone slabs in laid bedded and pointed in any morter complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick bedding layer in cement mortar 1:6 complete all as specified and directed.

Rohan Construction Company

M/S GR construction compony

PUNEET CONSTRUCTIONS CO.