Repair and Renovation of Park Near H/o Gulab Numberdar in Ward No. 06 and Park Near H/o Charnalia in Ward No. 07, M.C. Nilokheri. (D-Plan)(For L and C Society)

Arm Wheel-Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M -25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, (Including concrete base of size- 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. (Exclusive GST/AnyTax).

Open Gym Air Walker-Providing, designing and fixing of air walker of size 992 x 505 x 1380 mm fabricated with mainpost of 140mm dia and 3.00 mm thick swing leg is dia 48 mm thickness 2.75mm, handle beam is dia 42 mm thickness 2.75mm , and other pipes of 2.75 mm thick having bottom plate 260 mm dia with thickness 12.00 mm ith ABS cap/ cover, all pipes made up of hot rolled tubular steel and pre-galvanized, having oil degreasing treatment and sand blasting de- rusting treatment mustbe used before powder coating treatment with baking temperature of more than 200 degree celsius using high quality paint nippon or equivalent of 90 120 micron thickness. All joints of pipe should be cut by CNC laser cutting and robotic welded, with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Foothold shall be made up of steel 3.00 mm thick Nylon 4.00 mm thick, with rounded edges to prevent any impact of injury and welded/ attached to main structure for vandalism proof design and long life. Bearing no 6205 used shall be maintenance free, duly oil sealed and self lubricated made by reputed company. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by steel/ LLDPE caps for ser safety. The equipment shall be fixed on ground with concrete of minimum strength M -25 with J- bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, (Including concrete base of size- 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. (Exclusive GST/Any Tax)

Open Gym Horse Rider Station-Providing, designing and fixing of horse rider station of size 1000 x 600 x 1100 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M -25 with J- bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, (Including concrete base of size- 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. (Exclusive GST/Any Tax)

Open Gym Sit Up Board-Providing, designing and fixing of single sit -up station of size 1504 x 1133 x 624 mm fabricated with main post of 140 mm dia and 3.00 mm thick, yellow sleeve dia 159 mm thickness 8.0mm, connecting pipe dia 33 mm thickness 3.0mm and rest of the pipes are 2.75 mm thick,having bottom plate 260 mm dia with thickness 12.00 mm with ABS cap/ cover,aII pipes made up of hot rolled tubular steel and pre galvanized, having oil degreasing treatment and sand blasting de-rusting treatment must be used before powder coating treatment with baking temperature of more than 200 degree celsius using high quality paint nippon or equivalent of 90 - 120 micron thickness. All joints of pipe should be cut by CNC laser cutting and robotic welded, with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat shall be made up of steel pipe 2.75mm thick , with rounded edges to prevent any impact of injury and welded/ attached to main structure for vandalism proof design and long life. All open ends of pipe to be closed by steel/ LLDPE caps for user safety. The equipment must confirm the quality standards such as DIN 79000 and EN 16630. The equipment must have TUV certification in the manufacturing process. The equipment shall be fixed on ground with concrete of minimum strength M -25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, (Including concrete base of size- 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover. (Exclusive GST/Any Tax)

Open Gym Push Up And Dip Bar-Providing, designing and fixing of exercising bar in a pair of size 1802 x 612 x 1399 mm fabricated with main post of 140 mm dia and 3.00 mm thick and rest of the pipes 2.75 mm thick yellow sleeve is dia 159mm thickness 8.00 mm, parallel bar dia 42 mm 2.75mm, rest pipe is thickness 2.75mm, having bottom plate 260 mm dia with thickness 12.00 mm with ABS cap/ cover. all pipes made up of hot rolled tubular steel and pre galvanized, having oil degreasing treatment and sand blasting de-rusting treatment must be used before powder coating treatment with baking temperature of more than 200 degree celsius using high quality paint nippon or equivalent of 80 - 120 micron thickness. All joints of pipe should be cut by CNC laser cutting and robotic welded, with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. The equipment must confirm the quality standards such as DIN 79000 and EN 16630. The equipment must have TUV certification in the manufacturing process. The equipment shall be fixed on ground with concrete of minimum strength M -25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, (Including concrete base of size- 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. (Exclusive GST/Any Tax)

Open Gym Pull Chair-Providing, designing and fixing of pull chair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M -25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, (Including concrete base of size- 0.45 x 0.45 x 0.60 M). All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. (Exclusive GST/Any Tax)