GEMC-511687791459855
Awarded to Health & Safety Solutions
₹1.5 L
Products
| Product | Brand / Model | HSN | Quantity | Unit Price | Amount |
|---|---|---|---|---|---|
| pulse oximeter units line powered | Pulse oximeter units line powered (NISCOMED) | - | 8 NOS | ₹18,700 | 149,600 |
Loading
Loading…
Loading…
| # | Company | Offered Item | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.5 LQualified 304 SF MILLENIUM APARTMENTS WARD NO 2 MEHRAULI SOUTH WEST DELHI DELHI 110030 | SOUTH DELHI | DELHI | 110030 | - | L1 | Qualified | |
| 2 | Not yet disclosed by govt. Qualified Make: TECHNOCARE
Model: CMS-4100 | Make: TECHNOCARE
Model: CMS-4100 | - | Qualified | |
| 3 | Not yet disclosed by govt. Qualified Make: niscomed
Model: Pulse oximeter units line powered (NISCOMED) | Make: niscomed
Model: Pulse oximeter units line powered (NISCOMED) | - | Qualified | |
| 4 | Not yet disclosed by govt. Qualified Make: TECHNOCARE
Model: CMS-4100 | Make: TECHNOCARE
Model: CMS-4100 | - | Qualified | |
| 5 | Not yet disclosed by govt. Qualified Make: masimo
Model: Pulse Oximeter-Masimo | Make: masimo
Model: Pulse Oximeter-Masimo | - | Qualified |
Tender Value
Refer Docs
EMD Value
Exempted
Closing Date
26 Sept 2018, 10:00 amClosed
Pulse Oximeter Units Line Powered ( 8 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Descriptions GMDN name and Code Pulse oximeter CT 1446 * "Pulse Oxymeter
line Powered:A mains electricity (AC- powered) photoelectric device intended for the continuous transcutaneous measurement and display of haemoglobin oxygen saturation (SpO2) The signals
typically produced by light-emitting diodes (LEDs) and a receiving detector in a probe
or directly built-in
are used to make the measurements using the principle of spectrophotometry The oximeter displays the SpO2 values and may yes * 1/5 calculate/display other parameters
e g
pulse rate
electrocardiogram (ECG) The device is typically used at the bedside " SpO2 measurement range at least 40-70 and 70 to 99 %
minimum gradation 1% yes * Power consumption 12 * power input and frequency 220 to 240V
50 Hz * Accuracy of pulse rate better than ± 5 bpm yes * Audiovisual alarms required: high and low SpO2 and pulse rate (operator variable settings)
sensor disconnected
sensor failure
low battery yes * Display type TFT Screen * Heat Dissipiation: Should maitain nominal Temp and the heat should be disbursed through a exhaust cooling fan yes * Mobility
portability Protective splashproof case for clean storage and safe transport * Operating condition:Capable of operating continuously in ambient temperature of 0 to 50 deg C and relative humidity of 15 to 90% in ideal circumstances yes * weight (gram) 3100 1-4000 Others: List of important spare parts and accessories with their part number
Certificate of Calibration and Inspection to be provided SPO2 PROBE
ADOPTER * 2/5 STANDARDS AND SAFETY:Should be FDA CE approved product ISO 80601-2-61-2011: Medical Electrical equipment- part 2-61: Particular requirements for the basic safety snd essential performance of pulse oxymeter Electrical safety conforms to standards for electrical safety IEC-60601-1
EMC safety confirms to IEC 60601-1-2 standard requirement; Manufacturer/supplier should have ISO 13485 certificate for quality standard Electrical safety conforms to standards for electrical safety IEC-60601-1 Shall meet IEC-60601-1-2 (General requirements for safety - electromagnetic compatibility) and IEC 60601-2-25 (essential performance of electrocardiographs) yes * Accuracy of SpO2 better than ± 1% for range 40-70 and better than ± 3% for range 70-99 yes * Pulse rate range at least 30 to 240 bpm
minimum gradation 1 bpm yes * Power cable length (meter) 3 * Signal strength or quality to be visually displayed yes * Memory Minimum 24 hrs trend memory for SpO2 & PR * Noise Level (dB) 45 Any applicable numeric value User's interface Easily accessible touch button to operate the machine * 3/5 Inbuilt Software and/or standard of communication yes * Display must allow easy viewing in all ambient light levels yes * Electrical protection provided by fuses in both live and neutral supply lines yes * Warranty Warranty 3 years warranty & one year with min. 3 free servicing. * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Indrapal Yadav 110033
BJRM Hospital
E- Block
Jahangir Puri 8 15
608308
GEM/2018/B/86378
GeM Contract
pulse oximeter units line powered
GeM Contract
15 days
Delhi; North Delhi
PRODUCT
Awarded to Health & Safety Solutions
₹1.5 L
| Product | Brand / Model | HSN | Quantity | Unit Price | Amount |
|---|---|---|---|---|---|
| pulse oximeter units line powered | Pulse oximeter units line powered (NISCOMED) | - | 8 NOS | ₹18,700 | 149,600 |
| Item | Delivery Location | Qty | Delivery |
|---|---|---|---|
| Pulse Oximeter Units Line Powered ( 8 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Descriptions GMDN name and Code Pulse oximeter CT 1446 * "Pulse Oxymeter | - | - | - |
| line Powered:A mains electricity (AC- powered) photoelectric device intended for the continuous transcutaneous measurement and display of haemoglobin oxygen saturation (SpO2) The signals | - | - | - |
| typically produced by light-emitting diodes (LEDs) and a receiving detector in a probe | - | - | - |
| or directly built-in | - | - | - |
| are used to make the measurements using the principle of spectrophotometry The oximeter displays the SpO2 values and may yes * 1/5 calculate/display other parameters | - | - | - |
| e g | - | - | - |
| pulse rate | - | - | - |
| electrocardiogram (ECG) The device is typically used at the bedside " SpO2 measurement range at least 40-70 and 70 to 99 % | - | - | - |
| minimum gradation 1% yes * Power consumption 12 * power input and frequency 220 to 240V | - | - | - |
| 50 Hz * Accuracy of pulse rate better than ± 5 bpm yes * Audiovisual alarms required: high and low SpO2 and pulse rate (operator variable settings) | - | - | - |
| sensor disconnected | - | - | - |
| sensor failure | - | - | - |
| low battery yes * Display type TFT Screen * Heat Dissipiation: Should maitain nominal Temp and the heat should be disbursed through a exhaust cooling fan yes * Mobility | - | - | - |
| portability Protective splashproof case for clean storage and safe transport * Operating condition:Capable of operating continuously in ambient temperature of 0 to 50 deg C and relative humidity of 15 to 90% in ideal circumstances yes * weight (gram) 3100 1-4000 Others: List of important spare parts and accessories with their part number | - | - | - |
| Certificate of Calibration and Inspection to be provided SPO2 PROBE | - | - | - |
| ADOPTER * 2/5 STANDARDS AND SAFETY:Should be FDA CE approved product ISO 80601-2-61-2011: Medical Electrical equipment- part 2-61: Particular requirements for the basic safety snd essential performance of pulse oxymeter Electrical safety conforms to standards for electrical safety IEC-60601-1 | - | - | - |
| EMC safety confirms to IEC 60601-1-2 standard requirement; Manufacturer/supplier should have ISO 13485 certificate for quality standard Electrical safety conforms to standards for electrical safety IEC-60601-1 Shall meet IEC-60601-1-2 (General requirements for safety - electromagnetic compatibility) and IEC 60601-2-25 (essential performance of electrocardiographs) yes * Accuracy of SpO2 better than ± 1% for range 40-70 and better than ± 3% for range 70-99 yes * Pulse rate range at least 30 to 240 bpm | - | - | - |
| minimum gradation 1 bpm yes * Power cable length (meter) 3 * Signal strength or quality to be visually displayed yes * Memory Minimum 24 hrs trend memory for SpO2 & PR * Noise Level (dB) 45 Any applicable numeric value User's interface Easily accessible touch button to operate the machine * 3/5 Inbuilt Software and/or standard of communication yes * Display must allow easy viewing in all ambient light levels yes * Electrical protection provided by fuses in both live and neutral supply lines yes * Warranty Warranty 3 years warranty & one year with min. 3 free servicing. * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Indrapal Yadav 110033 | - | - | - |
| BJRM Hospital | - | - | - |
| E- Block | - | - | - |
| Jahangir Puri 8 15 | - | - | - |
Exempted
30 Jan 2019
27 Sept 2018
contract_GEMC-511687791459855.pdf
GEM_CONTRACT • 0.02 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_608308.pdf
GEM_BID
termsCondition.pdf
OTHER
2657c7ca70287299b5181580fdb5a7ab.pdf
OTHER
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .