REPAIR TO FENCING PATH DRAIN ETC MISC BR WORK IN ADM AREA AT AF STATION MAHARAJPUR

Amount

Demolition of cement concrete in any description and in any position not otherwise specifically provided for including removing all debries to a distance exceeding 500 M but not exceeding 1.5 KM complete finishes all as specified and directed.

M&L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerb and the like, slightly rounded or chamfered on edges ect complete all as specified and directed

Demolition of cement concrete in ground floors and pavings not exc. 15 Cm thickness (below/above ground level) including floor finishes all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight, complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L 75 mm thick PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in floor etc finished fair and even complete all as specified and directed

Material & labour for sand filling with clean dry find sand unwashed including gently punning around and under floor/foundation including consolidation complete all as specified and directed.

M&L for 60mm thick machine pressed,coloured ,glossy finish(rubber moulded) precast cement concrete interlocking pavers/ tiles Grade M-35 made with grey cement and pigment any size ,pattern and shape as approved by GE, laid dry over sand cushion in patterns with different colour paver block /tiles complete all as specified and directed.

Dismantling posts or struts (Wood, steel or RCC) of any section and size, embedded in concrete, brick work, masonry etc including taking out embedded portion and making good the disturbed surfaces complete all as speciifed and directed.

All as per item No. 9 here in before but embedded on natural ground complete all as specified and directed.

Dismantling fencing wire mesh of any size and description complete all as specified and directed.

M&L for mild steel work as in post and strut in fencing including cutting top to shape as directed, drilling holes, notching for wire etc, flat iron fillets for securing wire mesh etc including embedding in concrete and similar work confirming to Fe-290, Grade E-165 complete all as specified and directed.

M&L machine made chequered cement concrete tiles 20cm x 20cm x 25mm thick, set and jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Supply Only Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm and n exc 10cm long complete all as specified and directed.

Supply only galvanised chain link fencing of any size, shape and dia as decided by GE complete all as specified and directed. [NOTE- Fixing work shall be measured and paid under relevant item no. 16 here-in-after.]

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards straining bolts etc including provision of binding wire complete all as specified and directed. Note: Mild steel screw bolts will be measured and paid under item No. 14 of BOQ as supply only.

M&L for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or grith complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface not exc 10cm width or grith complete all as specified and directed.

Taking down of cement plaster in any description on brick or stone wall etc., incl hacking out joints for key scrubbing down with water etc. all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or on concrete surfaces in Cement Mortar 1:4 surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or on concrete surfaces in Cement Mortar 1:6surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick on ceiling surfaces in Cement Mortar 1:3, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and or riveted or forged into spikes, framed, barred iron door, ladders, fencing work ect. conforming to Fe-290 Gde E-165 complete all as specified and directed. Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead length where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts), providing and fiitings angle cleats, fish plates, gusset plate etc., also for welding plumbing, truing up and fixing complete. No claim whatso ever shall be entertained by Govt on this account.

S&F 1mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with fixed with L-type or J-type or cranked hook bolts in roof, wall etc complete all as specified and as directed.

M&L for GI wire netting size 1.40 mm dia and 25 mm mesh size fixed with tinned tacks of wire staple complete all as specified and directed.

Dismantling of asbestos cement ( corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for Rolling shutters.

S&F rolled section for structural steel work as in main and cross beams, hip and jack rafters, purlin where connected to common rafters and running rails and guides for sliding crane, fixed with angle cleats or other connecting plates/ bolts, conforming to Fe-290(Gde-E-165) complete all as specified and as directed. Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete.

All as per item No. 32 here in before but fixing only complete all as specified and directed. [NOTE- Serviceable materials shall be obtained from srl item no. 31 here-in-before for reuse.]

S&F colour coated, pre-profiled (Trapezoidal or High Rib) Galvalume steel sheet, 0.5mm thickness, aluminium zinc coating of 120 gms, top organic coating of polyster paint 16-18 microns over 5-7 mocrons epoxy primer fixed on angle iron bracket with & including self drilling and self tapping screws of appropriate size, sealed with integrated EPDM rebber washer for water tight fixing and side laps to be stiched using Aluminium pop rivets fixed on top of roof complete all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub-class ‘B’ bricks modular size straight or curved on plan exc 6m mean radius built in Cement Mortar 1:4, complete all as specified and directed.

M&L for brick work with sub-class ‘B’ bricks modular size straight or curved on plan exc 6m mean radius built in Cement Mortar 1:4 but except bricks, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in levelling course finished even and fair for laying floor etc all as specified and directed

M&L for premium quality glazed ceramic tiles of size 450 x 300 x 7-8 mm thick coloured on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles including and over rendering 10 mm thick in Cement Mortar 1:4 on wall complete all as specified and directed.

M&L for premium quality non skid, joint free coloured ceramic floor tiles 7- 8 mm thick (square/rectangular) area of each tiles exc 0.06 sqm but not exc 0.11 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles including and over 15mm thick screed bed in Cement Mortar (1:4) complete all as specified and directed.

Dismantling existing paver block of any size and pattern and refixing the same with proper matching to existing surfaces complete all as specified and directed.

Preparation of plastered or unplastered old decorated surfaces of wall including cornices by brooming down or steel wire brushing to remove of dust, dirt and loose scales of lime wash and other foreign material, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Description all as per item No 43 here in before but applying one coat of exterior emulsion wall paint (Ace paint from Asian paint or wall mast from Berger paint) on bands/ fascia and walls complete all as specified and as directed. Note: Shade of paint will be decided by Engg-in -Charge.

Dismantling existing chain link fencing of any description and refixing in same position after necessary repair work complete all as specified and directed. Note: Repair work shall be measured and paid separately under respective item of BOQ.

UNIVERSAL AGENCY