REPAIR TO SECURITY FENCING, BOUNDARY WALL, GATES AND ALLIED WORKS UNDER AGE BR-II OF GE(AF) ADM AREA AT AF STATION AGRA.

Amount

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches,pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, class designation 75(Kgf/cm2) straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.

All as per item no. 02 but except bricks( bricks used shall be retrieved from item no.01 i.e from demolition).

Taking down cement plaster of any thickness on walls including racking out joints hacking for key,scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick/concrete surfaces finished even & smooth without using extra cement etc complete all as specified and directed.

M&L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @0.90 liter/10 sqm over new surfaces complete all as specified and directed.

M&L for apply two coats of cement base paint on walls over one coat of alkali resistant primer including preparation of new plastered brick/concrete surfaces complete all specified and directed.

M&L for preparation of old decorated/plastered surfaces of wall (brick & concrete) and apply one coat of cement base paint complete all specified and directed.

M&L for preperation of old decorated plastered suface of walls applying One coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified and directed.

M&L mild steel framed work with angle iron as in posts and struts in fencing including cutting tops to shape, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only MS galvanised chain link fencing including taking down existing fencing complete all as specified and directed. Note: Weight of fencing shall be decided by BOO

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire including dismantling of exsiting fencing complete all as specified and directed.

Supply only mild steel flat, round or square bars for weaving of chain link fencing conforming to Fe-410-W, Gde E-165, quality 'A' including dismantling of exsiting flat iron complete all as specified and directed.

Supply only mild steel bolts, purpose made with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 16 to 18 mm dia of neck, length of bolts exc. 5 cm but not exc. 10 cm complete all as specified and directed. Note for item No. 11,13 & 14 : Rate for fixing shall deemed to be included in rates of Srl item No. 12 above

Dismantling post or struts (wood,steel or RCC) any section,embedded in concrete, brick work,masonry,etc, including taking out embedded portion and making good natural ground to disturbed ground complete all specified and directed.

Dismantling structural steel work including doors,gates but excluding framed truss etc. complete all specified and directed.

S&F framed work as in door or gates of angle or other section with gusset plates,rails braces, etc, complete,drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding and hanging door fittings ( exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and holdfast complete all as pecified and directed.

Easing and adjusting of steel door/gate incl removing rusted and forging materials and replacing broken hinges/hold-fast including welding and all labour complete all as specified and directed.

M&L for welding in repairs exc 2.5cm but n exc 5 cm in length wxc 6mm but n exc 9mm thickness or metal to be welded and jointed (for fixing small articles like helical spring etc) complete all as specified and directed.

M&L for excavating in trenches in soft/loose soil , not exc 1.5m wide and not exc.1.5m in depth for foundation,etc. or for shafts, wells, cesspits,manholes, pier holes,etc not exc 10sqm on plan and not exc 1.5m in depth and getting out complete all specified and directed.

Returning filling soil in including spreading,levelling and ramming with watering in layers not exc. 25 cm complete all specified and directed.

Removing excavated soil not exc. 50m and deposited where directed at a level not exc 1.5m above the starting point complete all specified and directed.

M&L for plain cement concrete type C2, 1:3:6 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all specified and directed.

M&L for 75mm thick cement concrete type C-1 (1:3:6) (using 20 mm graded stone aggregate ) as in plinth protection and path finished even and smooth without using extra cement with forming construction joints filled with filler incl demolition of existing PCC complete all specified and directed.

M&L in repair precast cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate,40mm thick louvres and jallies including all moulding set in CM 1:4 complete all as specified and directed.

M&L for two coat of synthetic enamel paint to new or previously untreated steel surface of any description, over 10cm in width or girth, not otherwise described over one coat of red oxide primer including preparation of surfaces complete all specified and directed.

M&L for two coat of synthetic enamel paint to new or previously untreated steel surface of any description, not exc 10cm in width or girth, not otherwise described over one coat of red oxide zinc chrome primer including preparation of surfaces complete all specified and directed.

M&L for one coat of synthetic enamel paint including preparation of surfaces to old steel surface of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed.

M&L for two coat of synthetic enamel paint including preparation of surfaces to old steel surface of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landing,cover slabs ( for manholes etc) chullah hoods, chajjas, water trughs, mangers,shelves and similar article with plain faces set in CM(1:6), including demolition complete all as specified and directed. Note- Steel reinforcement shall be measured and paid separately under respective item.

M&L for mild steel TMT bars 10mm dia and over, cut to length,bent to shape required,including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia or securing with clips,set in CM 1:4 complete all as specified and directed.

Disamantling of stone slabs and tiles of any description or thickness in floors,aprons etc. laid bedded and pointed in any mortar complete all specified and directed.

S&F Dholpur stone 16 to18mm thick cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.50 sqm fixed with and including one number SS clamps (grade 202) of flat-30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment with 10mm thick CM1:4 complete all specified and directed.

M&L for 16-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and including screed bed or bedding layer of mortar 10 mm thick in Cement Mortar (1:4) and pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for preparation of new concrete surface and applying two coats of synthetic enamel paint over a priming paint plaster coat complete all specified and directed.

M&L for removing old enamel paint and cleaning with scrapers, any number of coats any width or girth from concrete surface and applying two coats of synthetic enamel paint over a priming paint plaster coat complete all specified and directed.

S&F in repair concertina coil 1050mm dia ( in stretched position) hot dip galvanised steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips (18SWG) fixed over razor wire at points whereever coil touches the bottom of razor wire with the help of hog rings (14 SWG) as per manufacuturer instruction complete all as specified and directed.

S&F in repair concertina coil 600mm dia ( in stretched position) hot dip galvanised steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips (18SWG) fixed over razor wire at points whereever coil touches the bottom of razor wire with the help of hog rings (14 SWG) as per manufacuturer instruction complete all as specified and directed.

Supply and fix in repair new razor wire fencing with 2.6 m dia and 14mm width, 0.5mm thick razor strip fixed with clamps to angle iron or swan neck angle or to existing angle iron complete all specified and directed.

S&F in repair Fibre glass reinforced translucent plain sheet 2mm thick in gate and the like etc complete all specified and directed.

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens,nailed to the under layer including removal of wooden battens, repair to edges of panels and finishing the groove complete all specified and directed.

M&L for wahed stone grit plaster on exterior walls in two layers,under layer 12mm cement platser 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @3kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 ( 1cement : 1/2 coarse sand : 2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chipping complete all as specified (Note- payment for providing groove shall be made separately)

M/S SINGH ELECTRIC CO (BID ID -3063246)

M/s M S Sharma and Co. (BID ID -3063373)

saroj constructions (BID ID -3071074)

SHRI RADHAYSHYAM JHA (BID ID -3063564)

C P Singh and Co (BID ID -3072357)