Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.8 LAccepted-AOC | L1 | Accepted-AOC Award of Contract | |
| 2 | L2₹10.4 L+₹54,077 (5.50%)Rejected-AOC BX 167 4 ISHWAR NAGAR PATHANKOT PUNJAB 145001 UDYAM PB 16 0001334 03AALFR1593C1ZE B R | PATHANKOT | PUNJAB | 145001 | L2 | Rejected-AOC Other than lowest |
Tender Value
Refer Docs
EMD Value
₹19,200
Closing Date
2 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE(I) Dharamshala
AGE(I) Dharamshala PIN-176216
PROVN OF LIBRARY/MUSEUM IN ADM BLOCK BLDG NO 04 AT BHARATPUR LINES AND 33 MTN BDE CAMP AT MIL STN DHARAMSHALA
2023_MES_574182_2
AGE(I)/DSL-44/2022-23
Open Tender
Civil Works
Item Rate
180 days
AGE(I) Dharamshala
As per NIT
7 documents required · 7 mandatory
₹500
AGE(I) Dharamshala
₹19,200
Yes
31 Aug 2023
9 Feb 2023
4 Mar 2023
9 Feb 2023
2 Mar 2023
16 Feb 2023
Amount
Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.
Excavation in trenches,not exc. 1.5 mtr wide and not exc. 1.5 mtr depth and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge.
Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete all as specified and directed by Engr-in-Charge.
Reinforced cement concrete M-25 design mix (using 20mm graded aggregates) in fdn incl footings, fdn beems, plinth beams, base for columns etc basement slabs and mass conccrete complete all as specified and directed by Engr-in-Charge.
Reinforced cement concrete M-25 design mix(using 20mm graded aggregates) in Beams,cantilevers, lintel over 1.5m span etc complete all as specified and directed by Engr-in-Charge.
Reinforced cement concrete M-25 design mix (using 20mm graded aggregates) in columns etc complete all as specified and directed by Engr-in-Charge.
RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed by Engr-in-Charge.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not.exc 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed by Engr-in-Charge.
Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Rough finished surfaces of concrete flat complete all as specified and directed by Engr-in-Charge.
Formwork to sides of pillars, posts, struts, piers,columns, and stanchions Rough finished surfaces of concrete Square, rectangular or polygonal complete all as specified and directed by Engr-in-Charge.
Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified and directed by Engr-in-Charge.
Mild steel TMT bars 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hucking ends and binding with and including mild steel wire (annealed) not les than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed by Engr-in-Charge.
All as per Srl item No. 12.00 here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as specified and directed by Engr-in-Charge.
Returning, filling in excavated approved soil,(soft/loose soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed by Engr-in-Charge.
Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.
Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.
Rendering 10 mm thick plaster in cement mortar 1: 6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
Rendering 15mm thick plaster in cement mortar 1:4 with water proofing compound on fair faces of brick work or concrete surfaces with water proofing compound,finished even and smooth without using extra cement finished fair and even complete all as specified and directed by Engr-in-Charge.
Rendering 10mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.
75mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate) in plinth protection finished even & smooth with out using extra cement including making joints 10mm wide and 30mm deep at spacing not more than 2.5m and at corners as mandatory and filled with sealing compound grade A, complete all as specified and directed by Engr-in-Charge.
Hard core of boulder gauge not. exc 63mm ,deposited ,spread and levelled in layers not exc 15 cm thick,watered and rammed to true surfaces complete all as specified and directed by Engr-in-Charge.
75mm thick cement concrete 1:4:8 type D-2 using 40mm stone aggregate as in sub base complete all as specified and directed by Engr-in-Charge.
Preparation of new plastered surface of wall by applying 1.5 mm wall care putty in two layer and making the surface smooth with sand paper and applying two coat of OBD complete all as specified and directed by Engr-in-Charge.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-Charge.
M&L for powder coated anodised aluminium frame with min powder coating 50 microns for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.
M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.
Aluminium, anodised, barrel tower bolts of extruded section of size 200mm, and fixed complete all as specified and directed by Engr-in-Charge.
Extruded aluminium alloy handles, 150mm in size, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.
M&L for stainless steel tube of size 50mm x 50mm medium weight fixed in frame work complete all as specified and directed by Engr-in-Charge. Make:- Jindal
Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed by Engr-in-Charge.
Chequered cement concrete tiles with grey cement and pigment 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.
PCC 1:2:4 Type B-1 (using 20mm graded crushed stone aggregate) as in coping / benching etc including necessary formwork / moulds complete all as specified and directed by Engr-in-Charge.
Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters, walk ways; railings; framework of water tanks and similar work conforming to Fe.290, Gde-E-165 complete all as specified and directed by Engr-in-Charge.
M & L for second classs hard wood tilmber framed and fixed clean sawn as in scantling complete all as specified and directed by Engr-in-Charge.
S & F 30 mm thick 2nd class hardwood Boarding planed one side with butt joints fixed with nails in flooring complete all as specified and directed by Engr-in-Charge.
S & F 1.25 mm thick mild steel sheet eaves gutters, galvanised class 3, half round with rounded edgesas complete all as specified and directed by Engr-in-Charge.
S & F Block boards 18/19mm, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed by Engr-in-Charge.
S & F 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge.
S & F 30mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanished including necessary welding if required etc complete all as specified and directed by Engr-in-Charge.
S&F 100 mm aluminium handles, cast type, anodised complete all as specified and directed by Engr-in-Charge.
S & F steel body magnet catcher for kitchen cabinet of suitable size complete all as specified and directed by Engr-in-Charge.
S & F Brass mortice lock, 4 lever vertical type, size 100 mm complete all as specified and directed by Engr-in-Charge.
S & F 6mm thick toughened glass fixed with bead/glazing pins in squares size exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge.
20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.
Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-Charge.
S& F 10 mm thick toughned glass as in hinged doors, partitions and similar work including cutting to shape, drilling holes etc. and including necessary hinges and lock complete all as specified and directed by Engr-in-Charge.
M&L for point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts cable in and including PVC casing and caping of suitable size (as per conductor run) with all fittings such as bend/corners/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly in existing CI/wooden box covered with 3 mm thick plastic laminated sheet for one light point/ fan/exhaust fan point/ bell point etc controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge. Note : i) New Sunken boxes wherever required shall be measured paid separately. ii) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost
All as per serial item No 47.00 here-in-before, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.
All as per serial item No 47.00 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.
M&L for switch socket combination 2 in 1, 5 Amp and 15 Amp flush type complete all as specified and directed by Engr-in-Charge.
M&L for Switch socket combination 2 in 1, 5 A flush type complete all as specified and directed by Engr-in-Charge.
M&L for switch piano flush type single pole one way 5/6 Amp complete all as specified and directed by Engr-in-Charge.
Ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge.
Supply & fix Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 08 way double door type with 200 amp rated bus bar complete all as specified and directed by Engr-in-Charge. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job.
Supply and fixing MCB SP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of capacity 5 to 32 Amp complete all as specified and directed by Engr-in-Charge.
Supply and fixing MCB SPN amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of capacity 32 Amp complete all as specified and directed by Engr-in-Charge.
Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.
Supply and fixing decorative wall light, gold finish fixture with cognac hammered glass diffuser suitable for 9 Watts LED filament lamp E27 base with three core flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-Charge. Make- HPL, Bajaj, Havells, CG etc.
M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I & complete all as specified and directed by Engr-in-Charge.
Sand cushioning to underground cables with a layer of sand 8cm before laying the cable and 15cm after lying the cable complete all as specified and directed by Engr-in-Charge.
M&L for sub class (B* brick, old size, brick covering laid dry, flat transversally along the length of cable on sand cushioning, with width equal to the length of the brick complete all as specified and directed by Engr-in-Charge.
Supply & fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade of crosssectional area 16 Sqmm 3 Core complete all as specified and directed by Engr-in-Charge.
All as per Srl No 62.00 here-in-before but of size 6 Sqmm 2 core complete all as specified and directed by Engr-in-Charge.
Supply and fixing post top lantern LED type 20 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete with PCC M-10 foundation complete all as specified and directed by Engr-in-Charge.
Supply and fixing post top lantern LED type 40 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete PCC M-10 foundation complete all as specified and directed by Engr-in-Charge. Make : Havells or Equivalent
Supply and fixing SMC cable junction box of size 140x140x95mm suitable for street light/PTL, square type , weather proof , IP-54 including fixing of 6 Amp MCB SP and clamps , nuts , bolts , washers suitable for fixing to PTL light including suitable arrangement for cable entry and exit with 2 run of 1.5 sqmm FRLS flexible cable laying through PVC pipe from junction box to PTL light fitting complete all as specified and directed by Engr-in-Charge Make : Sintax
Supply and fixing for GI tubing light grade 40 mm bore for fixing of post top lantern & laying of UG LT Cable complete all as specified and directed by Engr-in-Charge.
M & L for cutting of existing road/ floor/ plinth/drain for taking out/laying of UG cable through GI pipe including necessary earth work not exceeding 1.5 in depth and 0.50 mtr in width and making good to match with existing surface with PCC 1:3:6 type C1 by (using 20mm graded stone aggregate) complete all as specified.
M/S RUDHRAKSH TRADING CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .