Rehabilitation of Bageri minor irrigation project under RWSLIP

Amount

Civil Works

Cutting & clearance of jungle, bushes, shrubs Ankra/Ipomoea, Julicflora typna etc. on canal and bunds in dry/moist/slushy conditions including disposal as per instructions of the Engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. (a) ordinary

Cutting & clearance of jungle, bushes, shrubs Ankra/Ipomoea, Julicflora typna etc. on canal and bunds in dry/moist/slushy conditions including disposal as per instructions of the Engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. (a) thick

Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m in dry or moist including dressing of excavated area, dewatering wherever required complete in all respect Hard/dense soil

Excavation with line drilling, controlled blasting near structures, populated area (situated within 50m) including dewatering, loading, unloading, disposal & dressing within initial lead of 50m and lift upto 1.5m complete in all respect in dry or moist and also including compensation of damages if any , in : Hard rock (dry or moist) requiring blasting (where hardness of rock is more than 2) including dewatering, disposal of excavated material in the designated spoil bank/ embankment and dressing of excavated material with all leads & lifts of excavation and disposal. The contractor is free to use the usable excavated stone else where for which any transition expenditure & royalties, tax etc if required to be paid then it will be liability of contractor as the cost of usable stone has already been deducted from the rate.

Dismantling cement concrete including disposal of material within 50 m lead, inclusive of de-watering wherever required.

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20mm

Providing and Laying in position of Cement concrete Nominal mix (1:2:4) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20mm

Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20mm

Side shuttering including propping etc. complete (to achieve finish F 2 for :Top or intermediate bed plates, in between masonry or piers, abutments sluice wells etc.

Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for foundation including curing all leads of all construction materials including curing etc. complete. In cement sand mortar 1:5

Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for Super Structure including curing all leads of all construction materials including curing etc. complete. In cement sand mortar 1:5

R. R stone masonry (where 90 % stones weighing not less than 37.50 kg.and no dimension to be less than 23 cm) for Super Structure including all leads of all construction materials including curing etc. complete. In cement sand mortar 1:6

Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate upto 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of: 75 mm

Dismantling old plaster or skirting, racking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 m lead, inclusive of de-watering wherever required.

Plaster in cement sand mortar 1:3 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materials of thickness: 25mm

Plaster in cement sand mortar 1:3 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materials of thickness: 20mm

Plaster in cement sand mortar 1:3 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materials of thickness: 12mm

Flush or ruled pointing on stone masonry including racking of joints and curing etc. complete including all leads of all construction materials in mortar ratio. In Cement sand mortar 1:3

R. R. stone pitching, hammer dressed with packing of voids from small stones including all lead & lifts, in required profile of 23 cm thickness (± 5 % thickness tolerance)

Supplying and laying sand of grade as per design requirement in required profile including all lead & lifts. This item is to be used only for laying filter / inverted filter

Supplying and laying aggregate in layers and profile as specified including all leads & lifts.Broken ballast 20 to 40 mm size This item is to be used only for laying filter / inverted filter

Supply of Quarry rubish not more than 10 cm in size including all lead and lift.

Spreading & consolidation of quarry rubbish / spalls to required grade & camber in layers not exceeding 15 cm. thickness (loose) by road roller as per specifications including dressing etc. complete.

Earth work in rough (borrow area) excavation for embankment in hard soil, morrum or highly weathered strata dry or moist, including laying in 20 cm layers (before compaction) and breaking of clods, sorting of grass, pebbles etc., and dressing when compacted manually or by plain roller with initial lead of 250 m and lift up to 1.50 m (excluding charges for compaction and watering), including loading and un-loading wherever required complete in all respect.

Compaction of earth or highly weathered strata By mechanical equipment such as sheep foot roller/ pneumatic tyred roller/vibro compactor required as per site condition to obtain dry density of.(i) at least 95% of Standard Proctor's density

Watering of earth including cost of carriage of water when source of water is upto 1 km

supply of wire crates in required size made of hot dipped G.I. wire conforming to IS4826-1979 having mess of 10*10cm (surface area of crates will be measured ) made of wire of 5 mm diameter

Filling crates with stone, in position at site including hinging with hot dipped G.I. Wire 5 mm dia, excluding cost of wire crates, including cost of stones in position complete in all respects.

Dismantling cement concrete lining including disposal of material within 50 m lead, inclusive of dewatering wherever required. Of thickness 7.50 cm

Preparation and dressing the sub grade including removal of irregularities up to 7.5 cm in soil, morrum mixed with pebbles, small boulders and and kankar & murrum for Bed

Side slopes

Cement concrete lining of mix (1:3:6) M-10 with upto 20 mm size well graded crusher broken stone aggregate laid as per specifications including all leads of all construction materials including rendering and curing etc. complete for canal bed of thickness 7.5 cm

Cement concrete lining of mix (1:3:6) M-10 with upto 20 mm size well graded crusher broken stone aggregate laid as per specifications including all leads of all construction materials including rendering and curing etc. complete for canal side slope of thickness 7.5 cm

Providing and laying under drainage below canal lining consisting of porus concrete of mix ratio 1:4 (1 cement: 4 course aggregate) 75 mm diametre, 300 mm long supported by 75 mm thick layer of coarse aggregate 12.5 mm to 40 mm size and 50 mm thick layer of sand

Providing, Fabrication, machining with straightening work of Guide Tee, Track, Sealing frame, Leaf frame or any part of gate's, complete as per drawing with testing, including cost of all materials, with machinery, labour, tools and tackles cutting, aligning, welding, finishing, cleaning etc., applying one coat of zinc rich epoxy primer and two coats of cold applied coal tar epoxy paint, etc., complete as per specifications and approved drawings with all lead and lifts, including packing & forwarding, transportation charges for structural steel components and other materials.

Making standard type cement gauge including engraving letters and painting including scaffolding etc.

Painting standard type gauge with black, red and white un-washable paints including cost of material

Providing, lowering,laying,alinging,fixing in position and jointing at all level /depth full round HDPE DWC( double wall corrugated) pipes of SN8 grade as per IS16098(part2) amended upto date in trenches in complete including all material ,labour ,sectional hydro testing (including the cost and conveyance of water to site for testing)and commissioning as per technical specifiaction drawing and as per direction of engineer,(1000mm)

Brick masonry (using well burnt clay bricks of size 230 x 110 x 70 mm, class designation 75 as per specification) up to plinth including all leads of all construction materials including curing etc. complete.In cement sand mortar 1:5

Brick masonry (using well burnt clay bricks of size 230 x 110 x 70 mm, class designation 75 as per specification) in superstructure including all leads of all construction materials including curing etc. complete.In cement sand mortar 1:5

Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarn & neatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. NP3 100mm

Providing, laying and fixing in position RCC spun or PVC pipe ( 4 Kg/ sq.cm As per ISI 4985) with with socket including all fittings in required size packed perfectly air tight including testing of joints. Dia-160mm

Structural steel work in single section fixed without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 mtr. height in R.S. joist flats, tees, angles and channels.

Earth work in excavation in foundation trenches or drain including dressing of sides and ramming of bottoms, lift up to 1.5m including taking out the excavated soil and depositing and refilling of jhiri with watering and ramming and disposals of surplus excavated soil as directed with a lead in a 50m. All kind of soil.

Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centring and shuttering all up to plinth level M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Brick masonry in foundation and plinth with bricks of class designation 75 mm in :Cement Mortar 1:4 (1-Cement:4-coarse sand).

Providing and laying damp-proof course with cement concrete grade M-150 (1:2:4) mortar prepared with 1 % solution of water-proof compound) including two coats of hot blown bitumen (2 Kg. Per Sqm.) complete as per specification with glass strip 3 mm thick at a distance of 1 Meter interval :50 mm thick.

Brick masonry in superstructure up to third storey with bricks of class designation 75 mm in :Cement Mortar 1:4 (1-Cement:4-coarse sand).

Half brick masonry in superstructure up to third story above plinth using bricks of designation 75 with nominal hoop reinforced (2 Nos. 6mm MS bar) at every fourth course in for hoop reinforcement 1Sqm. 6mm MS bar 2x2x1.00 = 4.00 Cement mortar 1:4 (1-Cement:4-coarse sand).

Reinforced cement concrete work in beams, suspended floors, roofs, girders having slopes up to 15o , landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases, up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good and joints excluding the cost of centring, shuttering and reinforcement: 1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size).

Centring and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of formwork for superstructure up to 4.5 m above plinth, for:Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc.

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Thermo-mechanically Treated bars (Conforming of relevant IS code)

Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish: 12 mm thick.

Dry boulder filling in required profile with filling of voids etc complete including all leads and lifts and well finished surface. Below flooring

50 mm thick cement concrete flooring with Metallic concrete hardener topping, under layer of 38 mm thick cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20 mm thick nominal size) and top layer of 12 mm thick metallic concrete hardener consisting of mix 1:2 (1-Cement:2-stone aggregate, 6mm nominal size) by volume & mixed with metallic hardening compound of approved quality @ 2Kg./Sqm. including cement slurry, rounding off edges etc. but excluding the cost of nosing of step etc. complete.

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or raw plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

Providing & fixing steel glazed doors, windows and ventilators shutters of standard rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or raw plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steel handles and peg stay etc. as required. Doors

Windows

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:

Providing and fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for soiland waste discharge system (IS : 13592: 1992 marked) of approved quality/ make.100 mm dia

P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approvedmakewithcover,25mmdia1MlongG.I.over-flowpipe&25Cm.longwashoutpipewithplug&socket,includingmakingconnectionetc.,completeofapproved design: Capacity 500 lit

P & F double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.1400mm sweap

P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required. 300mm sweap

Supply & fixing steel shutter (Almirah type) with 18 gauge steel border & steel shutter including locking arrangement and painting etc. complete fixed on wall with joint fast (iron clip)

SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively.1.0/ 1.1 HP, 1-Ø, (10-50)Mtr, (53-6.5)LPM

P&F whie vitreous china double syphonic european WC (IS : 2556 Mark) with mounted WVC flushing cistern of (IS: 2556 Mark) of 10 litre capacity complete with all necessary internal fitting incl. cutting and making good the wall and floor.

P & F water closet Seat Covers with brass hinges complete :-Solid PVC (ISI marked) grade-I White for EWC.

P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall :- Size 580 mm x 430 mm

Providing and fiixng C.P. flange for 15mm dia taps

P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors: Concealed pipe in wall incl. with anticorrosive bitumen paint- (B-type) ;- 15 mm dia nominal bore.

P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors: Exposed on wall- (B-type) ;- 25 mm dia nominal bore.

Making connection of G.I. distribution branch with G.I. main including all fitting.- Up to 25 mm dia.

P & F Pillar Cocks (IS:8934 Mark) of superior quality and approved make :- C.P. Pillar cock 15 mm dia nominal bore.

P & F Bib Cock (IS:8931 Mark) Superior quality of approved make :- C.P. Brass bib cock, 15 mm nominal bore.

P & F Stop cock (IS:8931 Mark) superior quality & of approved make :- C.P. Brass 15 mm nominal bore.

P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.- C.P. Inlet connection 15 mm Brass (IS:8931 marked).

P & F 15 mm. Dia Connection pipe of approved quality/ make:- C.P. Brass Pipe with CP Brass nuts upto length 600 mm.

P & F Full-way valve (IS:778 Mark) or wheel valve of approved make :- Gun-metal 15 mm nominal bore.

P & F Full-way valve (IS:778 Mark) or wheel valve of approved make :- Gun-metal 25 mm nominal bore.

P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design.- 2000 litres capacity.

Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1.1 excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete- 150mm dia

Providing & Laying C.C. 1:5:10 (Stone aggregate 40 mm nominal size) all around S.W. pipe including 15 Cm. thick bed concrete as per Rajasthan P.W.D. specifications : (Width W=Diameter of pipe in Cm+40 Cm.)(Excluding cost of pipe) :- 150mm dia S.W. Pipe.

Providing & fixing S.W. square mouth Gully trap 'A' grade (ISI marked) of approved make & design in existing man-hole.- Size 225 x 150mm

P & F Sand-cast Floor trap (Nahni) of (IS:1729 Mark) of approved quality / make with socket down or hinged grating including cutting and making good the floor- Size 100x100 mm.

P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant- 75mm dia

Construction of manhole in all type of soil inner size 90 X 60 Cm. thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring,making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C.flooring , 25 Kg. CI cover with frame of 40mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. :- Depth upto 0.5mtr

Construction of soakage well in all type of soil 300 mm thick dry masonry top and bottom 300 mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring, earth work complete as per approved drawing including disposal of earth within a lead of 50 mtr. :- Size 300 Cm. dia outside & 300 Cm. depth.

Supplying and fixing C.I. cover with frame, CI grating for chambers & man holes.

Construction of Open Surface Drain with 112 mm thick brick masonary in CM 1:4, 110mm thick base concrete 1:5:10, 37mm thick M-15 grade C.C. flooring, 12 mm 1:4 cement plaster on all exposed face of walls including top surface excavation & disposal of earth complete as per approved design/drawing:- 150mm drain, 225 mm Av. depth.

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.(Group-1) : i- short point (up to 3 m)

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.(Group-1) : ii- medium point ( up to 6 m)

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.(Group-1) : iii- long point (up to 10m)

Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, 18 SWG 175 mm x 100 mm x 60 mm M.S. box with earth terminal, 6 A switch, 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.- Group 1 (On Board)

P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.- Group 1, Single pole & Neutral MCB ( 40 A to 63 A rating)

P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.- Group 1, Single pole MCB ( 40 A to 63 A rating)

Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 25 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required- Complete rate

P&Fstar rated double ball bearing capacitor start, aluminimum body & blade ceiling fan with down road upto 30 cm with 3 x 1.50 sq mm pvc insulated flexible copper conductor making connection testing etc. as required. (Group-1):- 1200mm sweep 5 Star rated

P&F18swg MS Recessed fan box hexagonal/ round of size 130 mm dia depth 75mm, 12mm dia rod fan hook with 100 mm length extended on each side.

P&F strip type fluorsent tube fitting fabricated from (CRCA sheet and finished with powder coating/stove enamelled paint)/(extruded non corrosive UV resist EP channel) complete with accessories (Low Loss Copper Choke, Starter, starter seat)/ Electronic Choke with terminal block duty prewired with copper conductor including making connection, testing etc. as required (without tube) (Group-1):- 1x36 watts with OCCB

P&F flurscent tube rod in existing fixtures as required (Group- A1):- 36/40 watts (Triphosphor coated)(Minimum 5 star rating)

P&F IP 43 portected street light luminaire on existing bracket suitable for FTL/T5 lamps, housing made out from CRCA sheet steel finished with stove enameled paint, having deep drawn aluminium alloy, powder coated canopy reflactor cum control gear tray, UV stablized clear ribbed acrylic diffuser held with synthetic gasket,min 6. nos of toggles for securing acrylic cover with housing with all necessary accessories (Low Loss Copper Choke, starter, starter seat)/Electronic choke prewired with PVC insulated copper conductor including making connection testing etc. as required (without tube) (Gropu 1):- 2x36watts

P&F 18 SWG sheet steel boxes duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surface or in recessed as required. (Group-1) :- 300mm x 375mm x 100mm

P&F ISI marked 6amp bakelite batten/angle holder including making connection testing etc as required. (Group-1)

P&F socket size flush type 120/280 watt rotary 5 step fan regulator including making connection testing etc as required. (Group-1)

supplying and drawing FR PVC insulated and unsheathed flexiable copper conductor ISI marked (IS:694) of 1.1KV gradeand approved make in existing surface or recessed conduit/casing capping including making connections etc as required. (FRLS IS :694) (Group-1) :- 1x1.5sqmm

Supply and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm on surface or inrecessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and scoket outlet, amking connection, testing etc. as required

M/s Shera Ram Choudhary

Ghosliya Construction Company