Electrical Wiring of newly constructed checkpost.

Amount

Part A Enter zero for this row

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required: Group B. Bulb point/ Fan point /Call bell point/ Tube light point /Exhaust point

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing metal box of following sizes (Nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 150mmX75mmX60mm deep

Supplying and fixing metal box of following sizes (Nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 200mmX125mmX60mm deep

Supplying and fixing following piono type switch/socket on the existing switch box/cover including connection etc as required. 5/6 A Switch

Supplying and fixing following piono type switch/socket on the existing switch box/cover including connection etc as required. 15/16A Switch

Supplying and fixing following piono type switch/socket on the existing switch box/cover including connection etc as required. 3pin 5/6 A Socket outlet

Supplying and fixing following piono type switch/socket on the existing switch box/cover including connection etc as required. 6pin 15/16 A Socket outlet

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/isolator). : 6 way, double door.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, ‘’C’’ curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole & neutral.

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required: 2 X 4sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required: 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and drawing following sizes FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ PVC conduit as required. : 2 x 6 sq.mm. for service connection

Supply & fixing of changeover switch double pole, 63 Amp

Supply fixing of tube light set 20W

Supply and fixing of LED bulb 18 W

Part B Enter zero for this row

Erection of all aluminium conductor of 7/3.40 mm to 7/4.00 mm diameter and above including binding etc. as required

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supply of 6 SWG GI wire for cradling 02 span

Erection of cradle guard as required

Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required .

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required 2X1.5 sqmm

Fitting and fixing of 300 W/ 500 W 220 LED light fitting

Dismantling of defective light fitting

Dismantling of overhead line comprising of copper/ aluminium over head conductor, GI wire, cross arms, insulator etc as required

Supplying and fixing of 32 mm dia X 2.00 metres long GI. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as reauired.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Total impact of GST for the purpose of CTC

MAHTO ENTERPRISES (BID ID -1106108)