31- NAYAAGAANV CHAURAAHA PAR PULIYA SE NAYAAGAANV MAARG PAR LEPAN MARAMMAT KAARY

Clearing and Grubbning Road Land including uprooting wild vegetation , grass, bushes , shrubs, saplings and trees of grith uoto 300mm , removel of stumps of such trees cut earlier and disposal of unserviceable ,materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness as per technical specification clause 201

Earh work in embankment cutting,filling ,leveling on the road 1.5 lift 30m. Lead with propar completion of the work.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause-401.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding material to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading-2 as per technical Specification Clause-405.

Providing ,laying ,spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thikness,hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming stone screening material to fill-up interstices of coarse aggregate ,watering and compacting to the required density Grading 3 as per technical Specification clause 405

Brick edging both side of the road with 1st class bricks with propar completion of the work. S.I.NO 1 S.O.R.NO 765

Providing and applying primar coat with bitumen (SS-1) ON Prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm. Using mechanical means as per technical specification clause 502

Providing and applying tack coat with bitumen (VG-10) using bituman distributorb at the rate of 0.35nkg per sqm on the prepared bituminous cleaned with Hydraulic broom as per technical specification clause 502

Providing ,laying and rolling of open- graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line ,grade and level to serve as wearing course on a previously prepared base,including mixing in a sutable plant ,laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be fillowed by (ex.cost of) seal coat of either type C as per technical specification clause 508

Providing and applying seal coat sealing the voids in a bitumenous surface laid to the specified levels, grade and fall using Type C as per technical specification clause 510

Supply and fixing of sign board writing letter etc. with proper completion of the work.