PROVN OF 02 X REVENUE AND 02 X SPECIAL REPAIR WORKS UNDER AGE B/R-III AT BB CANTT, SRINAGAR

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches, n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out in hard/dense soil complete all as specified and directed.

M&L Cement concrete 1:4:8 type D-2( using 40mm graded stone aggregate ) as in foundations, filling and mass concrete complete all as specified and directed.

M&L Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Returning, filling in excavated approved soil,(soft/loose soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not les than 0.9mm dia or securing with clips quality conforming complete all as specified and directed.

-Ditto- all as per item No 7above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as specified and directed.

Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified and directed.

M&L RCC type B1 (1:2:4) using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L Damp proof course 40mm thick in cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate mixed with integral water proofing compound, to horizontal or vertical surfaces including necessary form work complete (integral water proofing compound to be measured separately as supply only).

S&F Roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, Angle channel or flat sections)ofFe-290 (Gde E-165) including distance pieces, cleats etc complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm mm thick of an colour having tensile strength of 550 Mpa as in the roof covering/cladding to wall, fixed with shelf tapping screws complete all as specified and directed.

M&L Preparation of new plaster surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&LGalvanised steel water tubing medium grade of size 15mm dia with all fittings such as tees elbows, nipples, union socket completed laid in floors wall ceiling complete all as specified and directed.

M&L Galvanised steel water tubing medium grade of size 20mm dia including short lengths with all fittings such as tees elbow sockets, bends, union, nipples, brass nut short pieces and diminishing pieces etc all as per IS 1239 fixed to walls ceiling or laid in floors complete all as specified and directed.

Lagging to pipes 15mm used in internal water supply or plumbing all around with 25mm thick bonded mineral wool performed 'SNAPON'pipe section of density 144 Kg/Cum conforming to IS 9842 complete all as specified and directed.

Lagging to pipes 20mm used in internal water supply or plumbing all around with 25mm thick bonded mineral wool performed 'SNAPON'pipe section of density 144 Kg/Cum conforming to IS 9842 complete all as specified and directed.

M&L Rendering 15mm thick plaster in cement mortar 1: 4 on fair faces of brick work or concrete surfaces with water proofing compound,finished even and smooth without using extra cement complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed. Make-Rajshree Doors or equivalent complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per Sketch of SSR Part-II & specification. Make: Rajshree Doors or equivalent complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section of size 100mm, and fixed complete all as specified and as directed.

S&F 75mm size butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.

S&F Extruded aluminium alloy handles, 100mm in size, fabricated type, anodised complete all as specified and as directed.

M&L Hard core of boulder gauge n. exc 63mm ,deposited ,spread and levelled in layers n. exc 15 cm thick,watered and rammed to true surfaces complete all as specified and directed.

M&L 75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in floor base of tiles complete all as specified and directed.

M&L Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surfaces 450mm x 300mm x 7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in Cement mortar 1:3 complete all as specified and directed.

S&F CP grating suitable for 75/100 mm bore floor trap and fixed with white cement complete all as specified and directed.

S&F Angle valve cast copper alloy chromium plated fancy type long body with capstan head handle screwed down high pressure screwed for iron pipe or for brass ferrule of bore 15mm complete all as specified directed.

S&F Bib taps 15 mm bore, cast copper alloy with crutch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type complete all as specified and directed.

S&F Stop valve copper alloy screwed down high pressur with crutch of butterfly handle screwed own both ends for iron ipes suitable for 20 mm dia pipe complete all as specified and directed.

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm dia with access door complete all as specified and directed.

S&F Mild Steel ventilators with centre hung shutter including hinges, steel peg stay, complete all as specified and directed.

M&L 75 mm thk cement concrete type C-1 (1:3:6) using 20mm graded stone aggregate as in plinth protection,Path finished even & smooth without using extra cement including making joints 10mm wide and 30mm deep at spacing not more than 2.5m and at corners mandatory and filled with sealing coupound grade 'A' complete all as specified and directed.

S&F 1000 Ltrs Capaacity Rotational molded polythene water storage tank (Three layer) vertical type with closed top hoisted and fixed in position complete all as specified and directed.

S & F figured glass pin head type 3 mm thick ordinary quality and glazing with oil putty n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.

S&F in repair vitreous china, squatting Pan 'Orissa' pattern 'white' size 580mm x 440mm with integral footrest including provision of trap set and lean concrete bedding connection to drain out pipe and to flush pipe and to flush pipe anti syphonage pipe etc complete including making good to floor where required complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. Make:Paryag/Polytech

S&F Ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 20mm bore iron pipe and fixed ( minimum weight 20mm -210 gms) complete all as specified and directed.

Supply only water proofing compound (liquid) complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting ,any gauge, thickness including roof covering etc complete all as specified and directed.

S&F Galvanized corrugated0.63mm thick mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in roofs walls etc of class 8, complete all as specified and directed.

S&F 0.80mm Plain,galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.

Preparation of newly or previously untreated steel surface exc 10 cm width or girth and applying two coats of synethic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L 2 mm thick fibre reinforced translucent sheet fixed with j hooks in roof complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

M&L Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified and directed.

M&L for repairing of Nissan huts doors (any size) by greasing,repair/replacement of roller/ball bearing , rolling track,replacement of damaged sheets, weldingand and painting and to make functional to the entire satisfaction of Engr-in-charge complete all as specified and directed. (Sheet will be measured and paid seperately)

M&L Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm, complete all as specified and as directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n.exc 15 cm thickness below or above GL complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor fair finished even and smooth with out using extra cement complete all as specified and directed.

Demolition to Brick work or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles but built in cement mortar complete all as specified and directed.

M&L Brick work with sub class B old size bricks straight or curved on plan any radius in half bricks thick wall built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc incl racking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L Rendering 15mm thick on surface other than fair face of brick work in cement mortar 1:6 finished even and smooth w/o using extra cement, complete all as specified and as directed.

Complete removing existing treatment including scraping, removing all mud cake with wire brush and gunny bags from old plastered surfaces and preparation of surfaces by using necessary filling compound 3 mm thick of Altek/Birla oil putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and directed.

Preparation of old steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete as in ground floor and paving not exc 15 cm thick below or above ground level complete all as specified and directed.

Demolition of cement concrete is reinforced (reinforcement cut as reqd to facilitate demolition) as in any description and in any position not otherwise specifically provide for complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40 mm grade stone aggregate) as in foundation filling and mass concrete complete all as specified.

M&L 75 mm thick PCC 1:2:4 type B-1 using 20 mm graded crushed stone agg as in flooring complete all as specified and directed.

M&L brick work with sub class B old size bricks straight or curved on plan exc 6m mean radius built in cemenet mortar 1:4 complete all as specified and directed.

M&L for RCC 1:3/2:3 Nominal Mix type A-1 (using 20 mm graded crushed stone agg) as in foundation, beam, plinth beam, bases for column, etc , basement slab, under-reamed piles and mass concrete complete all as specified and directed.

S&F mild steel frames work as in grill garating etc with ends of bars shoulders and /or riveted or forged framed guard bars, ladders, walk way , railing and similar work confirming to Fe-290 Gde E-165.

M&L rendering 15 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface with WPC finished even and smooth without using extra cement complete all as specified and directed. ( WPC will be paid and measured separately)

M&L for Point wiring with 1.5 Sqmm copper conductor cable (multistrand) PVC insulated FRLS (unsheathed), surface type, drawing in and including PVC Casing caping or PVC concealed conduit 19mm dia, having wall thickness not less than 2 mm with sunk cast iron/pressed steel terminal boxes made out of 1.2mm thick sheet inclluding one coat red oxide primer on internal and external surface covered with 3mm thick hylam brand IS-2036 marked laminated sheet cover (for Mounting switches, sockets, regulators etc), including 1.5 Sqmm PVC insulated (multistrand) FRLS copper conductor continious earth wire for One light point or one fan point controlled by one switch SP 230 Volts Make of Wire : Havells/KEI /HPL

All as per item No 72 above but using 2.5 sqmm copper conductor cable (multistrand) PVC insulated FRLS (unsheathed) for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green solid copper conductor cable as continuous earth wire with lugs complete all as specified and directed. Make of Wire : Havells/KEI /HPL

S&F Switch piano, flush type single pole, one way 15 Amp all as specified and directed by Engr-in-Charge. Make HPL/Cona/SSK

S&F Socket outlet 2 in 1, 3 pin 5A and 15 amp flush type complete all as specified and directed by Engr-in-Charge. Make HPL/Cona/SSK

S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.

S&F Lamp holder insulated body PVC/polycarbonate with back plate suitable for batten fitting complete all as specified and directed. Make Anchor/Cona/Standard

S&F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed. Make Anchor/Cona/Standard

S&F LED light fitting fixture 20W, decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly energy efficient ready to use complete all as specified and directed. Make-Havells(LHEXBXPNIN1WO20)/Wipro(LL20-221-XXX-65-NE)/HPL(HLPT51820PCGCW)/Philips (BN021CLED20SPSUCDLGR)

S&F LED Mirror light fitting 1 x10 W 6500K decorative ultra slim linear LED lighting fixture with extruded AL. heat sink, environmental friendly, energy efficient, complete all as specified and directed. Make - Wipro Cat Part No LL20-111-XXX-65-NE or equivalent in Philips/Havells

S&F 10 Watt 6000K LED Bulk head luminaries with opal diffuser, etc complete with accessories complete all as specified and directed. Make - HPL (HLPLEDBH10W(CW))/ Havells/HPL/CG)

S&F LED 10 W (candle /ball type) with B-22 base, complete all as specified and directed. Make -Havells/Philips/Halonix

S&F Sheet Metal enclosure double door for mounting MCBs with 200 A rated bus bar 4 way AC 240 Volt with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge. Make Indoasian/L&T/HPL

S&F MCB SPN 40 amp, 240 V, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity complete all as specified and directed. Make Indoasian/L&T/HPL

S&F ventilating fan made out of high quality engineering plastic, resistant to colour change with anti static properties, 250mm sweep suitable to work on 230 Volts 50 Hz AC supply of Havells or equivalent of CG/Bajaj including connecting to ceiling rose complete all as specified and directed.

S&F single pole MCB 6 TO 32 Amps 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘c’ curve, 10 KA breaking capacity complete all as specified and directed. Make Indoasian/L&T/HPL

M&L for submain wiring with two single core PVC insulated flexible copper conductor cable of sze 2x 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 2.5 Sqmm as earth lead in and including PVC conduit/casing and capping and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed. Make of Wire : HPL/Havells/KEI

M&L for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galavanised iron and earth strip protected by provision of GI light grade pipe 20mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on complete all as specified and directed.

S&F Storage water heater 25 ltrs capacity vertical mounting AC 230 Volts BEE 5 Star rating including connecting cord and plug, safety valve, nuts and bolts, PVC Flexible connections with length 450mm long 15mm dia with brass hexagonal adoptors both side duly ISI marked Suitable for hot/cold water complete including grouting of nuts and bolts, complete all as specified and directed Make Havells/Venus/V Gaurd.

M/S TAJ DIN KHARI

M/S AKMAL CONSTRUCTIONS