ADDITION_ ALTERATION TO BLD NO P 603 and P 604 AND PERIMETER WALL AT VARUNAPURI AND PROVN OF CERTAIN EM AND BR WORKS UNDER GE NW VASCO

Supply only liquid water proofing compound

Taking down barbed wire all as specified and directed by Engineer-in-Charge

Taking down concertina coil all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Taking down cement plastering of any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed.

S & F MS angle iron in fencing posts & struts including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry of 1:3:6 type C-1 with solid blocks, exc. 10 cm in width and setting in mortar 1:6, complete all as specified and directed.

M&L for rendering 15mm thick plaster with WPC in cement mortar 1:4 in two coats (10 mm thick backing coat + 5mm thick finishing coat) finished even and smooth without using extra cement complete all as specified

M & L PCC 1:2:4 type B1 using 20mm graded aggregate as in coping and benching incl weathering slightly rounded or chamfered angles and throating as directed including form work.

Providing and fixing concertina coil fencing with punched tape Barbed Razor concertina coil 600 mm dia 10 metre operable lenglth (total 90m) having 50 nos rounds per 6 metre length, with existing angle iron 'Y' shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T reinforced barbed wire, stud tied wtih GI staples and GI clips to retain horizontal including necessary bolts or GI bared wire tied to angle iron all complete as per direction of Engineer-in-Charge wtih reinforced barbed tape (R.B.T)/Spring core (2.5mm thick) wire of high tensile strength of 165 kg/sq mm wtih tape (0.52 mm thick) and weight 43.478 gm/metre (cost of MS angle C.C blocks shall be paid separately).

S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including preparation of newly plastered surfaces.

Demolition of reinforced Concrete (below or above ground level)

M&L for RCC nominal mix (1:2:4) 20mm coarse aggregate for Columns, pillars, piers, posts and struts complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete flat.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and includeing mild steel wire (annealed) not less then 0.9mm dia or securing with clips as specified and as directed.

M&L for Mild steel TMT bars 6 to 8mm dia cut to length bend to shape required incl cranking, bending, spirally hooping for stirups, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified.

M&L for writing letters/ bldg Nos on walls 7.5 cm high using synthetic enamel paint white over circular/rectangular shaped black painted background (20 to 30 cm dia/long) complete all as specified and directed.

Surface dressing for Hard/dense soil n exc 15 cm deep and making good surface as directed by Engr-in charge

Excavating in post holes soft / disintegrated rock (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

M&L Cement concrete of Type D2 1:4:8(40mm graded aggregate) as in filling and mass concrete complete all as specified and as directed.

S&F Roof truss (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle,channel or flat section) including distance pieces, cleats, etc (Fe-410-W Gde-E-250 quality-A) complete all as specified and as directed.

S&F steel works in tubular trusses incl special washers etc complete using ERW or induction butt welded tubes confirming to IS 1161 1979 grade St 240 complete all as specified and as directed.

S&F MS plates(plain or chequered) channels, square cut or notched confirming to Fe-290 grade E-165 (ordinary and counter sunk) forming holes, without any attachment including welding etc and as complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge for roof, fixed with self tapping screws complete all as specified and as directed.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 2 Ton complete all as specified and as directed

Supply and fix copper pipe of size 5/8" and 3/8" dia size as suction and discharge refregent pipes suitable for split AC unit 2 TR capacity as extra length incl necessory bracing and insulation work complete

it as reqds size confiming to IS: 9537(Part-3), including accessories fixed on wall/ceiling all as directed including making good of disturbed surfaces area. (Note: Drilling hole through wall to pass pipe/cable and making disturbed area matchig with original existing are included in work)

M & L for sub main wiring with 2 run of FRLS single core PVC insulated & unsheathed 1100 V grade multistranded copper conductor of nominal cross sectional area 4 sqmm alongwith one run of FRLS PVC insulated & unsheathed copper conductor of nominal cross sectional area 4 sqmm as earth continuity conductor incl suitable size concealed wiring in PVC conduit including accessories fixed on wall all as directed including making good of disturbed surfaces area complete all as specified and as directed

Supply snd install voltage stabilizer for automatic operation , single phase neutrally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of +/- 2.5 % and capacity 5 KVA complete all as specified and as directed

M & L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 1.5 sqmm alongwith one run of FRLS PVC insulated & unsheathed copper conductor of nominal cross sectional area 1.5 sqmm as earth continuity conductor drawn through steel condu

S&F SPN enclosure with two pin and earth plug and socket complete with one single pole MCB with 20 Amps all as specified and as directed

M & L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 2.5 sqmm alongwith one run of FRLS PVC insulated & unsheathed copper conductor of nominal cross sectional area 2.5 sqmm as earth continuity conductor drawn through steel conduit as reqds size confiming to IS: 9537(Part-3), including accessories fixed on wall/ceiling all as directed including making good of disturbed surfaces area. (Note: Drilling hole through wall to pass pipe/cable and makig disturbed area matching with original existing are included in work)

S & F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V all as specified.

S & F Flame proof exhaust fans AC single phase 230/240 V of size 305 mm sweep including necessary wall opening and fixing arrangement all as specified.

S & F Flame proof Louvers suitable for 305 mm exhaust fan all as specified.

Supply and install high wall flame proof split units indoor/outdoor complete with flame proof control unit and with in built air ioniser and Plasma filter for better indoor air quality with efficient energy saving and EER 3.2.of 1.5 Ton capacity. Condensing Unit: Condensing motor, condensing coil made up of aluminium blue fins duly coated with specialist chemical to prevent refrigerant leakage. GI/SS304 Enclosure to be used to integrate the components of conditioner unit. Cooling Unit: Indoor wall mounted, split type cooling unit. Cooling motor, condensing coil with copper tubes and aluminium blue finsduly coated with specialist chemical to prevent refrigerant leakage. GI/SS304 Enclosure to be used to integrate the components of cooling unit. Flameproof ccontrol panel: Lamp 230 V AC -3 Nos . Power ON, Compressor ON, Cooling ON, with temperature indicator, 2 relay output, FLP RTD PT100 3wire. MCB, Contactor & overload relay for protection compressor and condensing motor cooling motor, incomer MCB included.

M & L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through steel conduit as reqds size confiming to IS: 9537(Part-3), including accessories fixed on wall/ceiling all as directed including making good of disturbed surfaces area. (Note: Drilling hole through wall to pass pipe/cable and makig disturbed area matching with original existing are included in work)

Supply and install voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of + 2.5% and of capacity 4 KVA complete all as specified and as directed

S & F Flame Proof three Phase and neutral plug, switch and socket 16 Amps capacitycomplete all as specified and directed by Engineer - in -Charge.