Construction Testing Successful Commissioning of WS Scheme Mujmandoo Sheikhpora under Languishing Programme

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:-

All kinds of soil

Ordinary Rock

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 mtr in width as well as 10 sqm on plan) including disposal of excavated earth upto 50 mtr and lift upto 1.50 mtr, as directed by Engineer-In- Charge:-

All kinds of soil

Ordinary Rock

Extra for every additional lift of 1.5 m or part there of in excavation/banking excavated or stacked material:-

All kinds of soil

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329 including fitting viz. Tees; Bends & other allied accessories and carriage from source up to road site by mechanical transport complete job:-

100 mm dia Ductile Iron Class K - 7 Pipes

80 mm dia Ductile Iron Class K - 7 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:-

100 mm dia pipes

80 mm dia pipes

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) Light A.including carriage by mechanical transport:-

65 mm dia. nominal bore

50 mm dia. nominal bore

40 mm dia. nominal bore

25 mm dia. nominal bore

20 mm dia. nominal bore

providing and fixing M.S. flanged pipe including cost of cutting of threaded portion/nuts/ bolts/washers/welding / all carriage complte etc.

100mm dia G.I. pipe

Fixing of sluice valves and NRV including fabrication of tail picec and all carriage complete.

100mm dia sluice valve

100 mm dia Non Return Valve (NRV)

Cutting of road and making it good with mix of cement concrete in 1:1.5:3 mix including supply of key material including all carriage complete job.

major cut=4no x 5.00 x 0.45 x 0.60

Miner cut = 5no x 5.00 x 0.30 x 0.45

Removal of trees, surface boulders/ clearance of silt by engaging manual labours.

Providing and laying of stone boulders tightly hand picked on horizontal levels

Providing and hand packing of quarry stone of required size into the wire crates including cost of stone,

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:Cement mortar 1:6 (1 Cement : 6 coarse sand)

Dry random rubble masonry with hard stone in foundation and plinth:With bond stone.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1;3:6(1 cement :3 coarse sand: 6 graded stone aggregate 20 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement of mix 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above/upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Structural steel work in single section, fixed with or without connectingplate, including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer all complete.

Providing and mixing water proofing material in cement concrete work in doses by weightof cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platforms

Edges of slabs and breaks in floors and walls Under 20 cm wide.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Columns, pillars, piers, abutments, posts and struts

12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 fine sand).

12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 coarse sand)

12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand)

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm.

Providing and incorporating of GP sheet water seal of 0.63 mm thick at constructional joint including jointing of ends so as to form continuious.

Providing corrugated G.S sheet roofing inlcuding vertical/curved surface fixed with poilymner coated J/L hooks, bolts and nuts 8 mm dia with bitumen and GI limpet washers or with GI limpet washers filled with white lead complete (upto any pitch in horizontal/vertical of curved surface) excl. the cost of purlins and including cutting to size and shape wherever required 0.50 mm thick.

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2.

Providing and fixing of M.S. Eves boarding 300 mm wide and soffit boarding including priming coat of red oxide and painting with two or more coats with symthetic paint of approved brand and manufacture

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Decorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :. First class kail wood

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Flush/Ruled Pointing

Painting with synthetic enamel paint/ priming coat of approved brand and manufacture to give an even shade. Two or more coats on new work

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Finishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm)

Providing and laying of filter media effective size of sand varies from 0.45 mm to 0.70 mm having uniformity coefficient between 1.30 to 1.75 and should be dust free from other organic impurities to be obtained from Ganderbal and the size of gravel should varry from 2mm to 40 mm including all carriages complete.

Providing and laying Baramulla Slab on bed including all carriage complete.

Providing of wire crates including all carriage complete

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :-

15 mm dia. nominal bore

20 mm dia. nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :-

20 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)

15 mm nominal bore

20 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:-

Long pan pattern white vitreous china W.C. pan of size 580 mm.

Providing and fixing Salem Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 19.10A1 Kitchen sink with drain board

Providing and fixing of PVC waste pipe for sink including PVC waste fitting complete (felexible 40 mm dai)

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing:-

Rectangular shape 300x450 mm

Providing and fixing bright finished brass handles with screws etc. complete

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

Providing and fixing of 35 ltr capacity geysers of Venus, ReCold or equivalent including fittings, and complete job

Providing and fixing heating points using 4.0 mm thick PVC Copper wire of reputed brand including all accessories

Providing and fixing of lighting points inm 2.5/1.5mm PVC Copper wire ,LED conical type of handles/ SYSKA make of 8 WATT including push buttons etc complete job.

Providing and fixing of exhaust fan in the chemical house complete job.(HAVELLS, USHA, CROMPTON GREAVES make)

Providing and fixing of CEILING fan in the operating room complete job.(HAVELLS, USHA, CROMPTON GREAVES make)

Carriage of material from sourse to dumping site at road by mechanical transport.

Cement & steel for avg. lead of 25 Km

Sand for avg. lead of 55 Km

20mm Aggregate for avg. lead of 35 Km

40mm Aggregate for avg. lead of 35 Km

Stone solling For avg lead of 15 km

Quarry stone for avg lead of 20 km

Wire Crates 40 km

Boulders 10 km

Bricks 30 Km

Carriage of pipes material from road site upto actual site of work by manual labour for avg. lead of 1000 mtrs.

100 mm dia. D.I.pipes

80/65/50/40/25/20/15 mm dia GI pipe

Carriage of material by manual labour from road site upto actual site of work . for avg. lead of 500 mtrs:-

Cement

steel

Sand and 20mm agg.

40mm Aggregate

Bricks

Wire Crates

Stone solling/quarry stone/Boulders

Carriage of material by manual labour from road site upto actual site of work for Avg. lead of 1500 mtr:-

Cement

steel

Sand and 20mm Aggregate

40mm Aggregate

Stone solling/quarry stone

100mm dia. GI pipe

GHULAM QADIR MALIK

Mohd Lateef Beigh