PROVN OF SPECIAL REPAIR OF 04 TOILET BLOCK NP31 NP32 NP33 and NP34 AT HQ 118 (I) INF BDE GP CAMP AT NIMU MIL STN UNDER AGE (I) NIMU

Amount

Taking down chowkhats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from the frame) and removing from site complete all as directed.

Taking down chowkhats or frames exc 1.5 sqm but n exc 4 sq.m each with shutters (without taking off shutters from the frame) and removing from site complete all as directed.

M&L for 2nd class Hardwood Plain, solid, straight chowkats and frames, wrought, rebated on the solid,, rounded or chamfered, put together with glue pinned at joints,

M&L for 30mm thick shutter, 2nd class Hardwood, Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for ecuring glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, SSR Part I, Section 8 clause 8.24(b) as in ventilators;

M&L for 35mm thick 2nd class Hardwood, Plain, framed, Panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

S&F for 5.5mm thick Sheet glass, ordinary quality and glazing with beads in square n. exc 0.5 sq. m in each pane

S&F 125 mm long Butt hinges, medium weight, cold rolled mild steel

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel

S&F for exruded aluminium alloy handles, 150mm size, fabricated type, anodised

S&F for exruded aluminium alloy handles, 100mm size, fabricated type, anodised

S&F 125 mm long, Aluminium anodised, barrel tower bolts of extruded section

S&F 200mm long, Aluminium anodised, barrel tower bolts of extruded section

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy

M&L for preparation of new wooden surfaces of any description over 10cm in width or girth and applying two coats of S/E paint over a coat of pink primer.

Dismantling floor, hearth or wall tiling including cement mortor bedding (but not baking), removing servicable tiles to store and rubbish off the permises.

Taking down cement or cement lime plaster any description on brick or stone wall surfaces, racking out joints and hacking out for key, scrubing down with water etc,

Demolition of cement concrete (Unreinforced) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in sub base for tiles

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding layer in CM 1:4 complete all as specified and directed by Engr-in-charge.

M&L for Glazed ceramic coloured tiles in vertical surface such as skirting, dado 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles incl 10mm thick plastering in CM 1:6 complete all as specifed and directed by Engr-in-charge.

M&L 10mm thick cement plaster in CM (1:6) on fair faces of brick walls surface or concete surface, finished even and smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick cement plaster in CM (1:4) on fair faces of brick walls surface or concete surface, finished even and smooth w/o using extra cement and using water proofing compound (external surface) complete all as specified and directed by Engr-in-Charge.

Supply only Integral water proofing compound

M&L preparing new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer all as specified and directed by Engr-in-charge.

M&L preparing new plastered surfaces of walls and applying two coat of dry distemper white or tinted over a coat of Chalk whiting, on plastered surfaces, prepara-tory to distempering all as specified and directed by Engr-in-charge.

M&L painting on steel surface over 10 cm width or girth including preparation of old painted surface of any description and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil

M & L Cement concrete 1:4:8 type D2 (40 mm graded crushed stone aggregate ) in foundations, filling and mass concrete complete all as specified. and directed by Engr-in-Charge.

M&L for Pre-cast cement concrete 1:3:6 type C1 (using 20mm graded agg) block masonry with solid blocks, exc. 10 cm in width and setting in mortar (1:4), complete

M&L for Reinforced cement concrete 1:2:4 type B1 (using 20mm graded agg ) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for Pre-cast Reinforced cement concrete 1:2:4 type B1 (using 20mm graded agg) as in Manhole cover slab and setting in mortar (1:4), complete

M&L for Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide..

M&L for Soakage well of 3M dia X 4.5M effective depth, excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as per CESZ/TD/1078/2011

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil.

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L for, in repairs, 9mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination &other side alancing white lamination, fixed with screws to timber frame work as in ceiling

M & L 2nd class soft wood Plain fillets. exc. 13 & n.exc 25 Sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads.

Dismantling water tanks of capacity exc 250 ltrs & n exc 500 ltrs and removing to stores

S&F for 1000 Ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Taking down 20mm bore steel tubing and connectionss, including cleaning for re-fixing or removal to stores

Taking down 15mm bore steel tubing and connectionss, including cleaning for re-fixing or removal to stores

S&F for 20mm dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.

S&F 20mm Nipple suitable for HDPE water tank (Minimum weight 20mm-45 gms

S&F in repairs, 15mm bore Bib taps fancy type chromium plated, crutch of butterfly handle, screwed down, screwed for iron pipes or for brass ferrule and fixed

S&F, PVC connections 15mm size with PTMT nuts of length 600mm

S&f in repairs, Stop valves15mm, fancy type ,chromium plated with long shank and cup (concealed type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F in repairs, 15mm bore dia Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F in repairs, vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S&F in repairs PVC valveless 10 litres capacity, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including bracket

Supply only, Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern

S&F in repair vitreous china WHB white, flat back, size 550 x 400mm including brackets, 32mm Brass CP waste fitting, PVC waste pipe & 450mm connection.

S&F, in repairs, Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F, Soap dish, any type, fixed to plugs with chromium plated brass screws

Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floor of 110mm bore pipe complete all as specified and directed by Engr-in-charge

S&F for 110 mm bore PVC (SWR) bends any radius ®

S&F for 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal

S&F for 110 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal

S&F for 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

M&L for 75mm ,PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F, 110mm PVC (SWR) 'P' trap

M&L for 100mm thick cement concrete 1:3:6 type C2 bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested;

CHHIRPON BUILDERS (BID ID -3122085)