Construction of 33 KV Line

Amount

Part A Particulars

33 KV feeder Pillar box

33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor (Include Temporary and Railway crossing)

33 KV ‘XLPE’ C/J Kit 3x300mm² Straight Through

Top channel with clamp

M.S. Angle Iron 65x65x6mm bracing.

33 KV M.S. bracing Angle clamp with nut bolt (Top side) for ST Pole 9/11 mtr with nut bolt by 50x8 mm MS flat Iron make

33 KV M.S. bracing Angle clamp with nut bolt (Bottom side) for ST Pole 9/11 mtr with nut bolt by 50x8 mm MS flat Iron make

extra support angle for cable support

clamp for extra angle

Number Plate with clamps.

Danger Board with Clamps.

Barbed wire.

Allumunium Paint.

Bolts, Nuts, & Washers.

Red Oxide Paint.

33 KV Stay rod.

33 KV ST pole Stay clamp

Stay wire

Earthing rod

GI wire

33 KV Line Cable hanging hooks & clamp

Special GI Pipe for cable earthing

33 KV Cross Arm clamp

Part B Work Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

Petty Stock Materials.

33 KV Line Isolator

33 KV Line Isolator Structure

33 KV ‘XLPE’ Cable 3x300mm²

ST Pole 9 M Long

ST Pole 11 M Long

33 KV Cross Arm

ACSR Dog conductor

Laying of 33 KV 3x300 mm² ‘XLPE’ cable(S/C) by digging pit & making trench in Proper size (1.2M depth x1.2M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks and sand/ as per site requirement HDD mathod can be used. (Include temporary cable when laying as permanent cable)

Extra cost for drilling horizontal hole 3 Mtr below the road & inserting 6” dia. HDPE Pipe PN-8 as per RESSPO for passing of 33 KV XLPE cable 3x300 mm². (Pipe and related materials provided by contractor)

MS cable hanger (made by 65x65x6 mm MS Angle) size with fastener clamp with installation charges including of all materials as per required size of RESSPO as per current market rate.

Open Cable Duct slab & laying of 33 KV 3x300 mm² ‘XLPE’ cable(D/C) in Cable trench (Cable trench already constructed by PWD from Gorakhpur - Sonauli Road) with proper Laying on cable hanger. (Include temporary cable when laying as permanent cable)

Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x300 mm² Outdoor/Straight Through.

Laying of 33 KV ‘XLPE’ cable in air after providing 6” dia.M.S. pipe 3m long Complete work.

Labour charges for inserting of MS Pipe, Rising of 33 KV cable and jumpering complete work.

Special Pipe earthing for 33 KV Jointing Kit.

There will be possible of breaking of various type of water supply pipe while laying of U/G cable, for which the repair will be charged. (Include complete materials and work) (01 Job =01 break).

Temporary line due to widening of Dharamshal Overbridge. (10 No ST Pole

Erection of 11 mtr long ST Pole with fitting

33 KV 3x300 mm² ‘XLPE’ cable

Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x300 mm² Outdoor

Providing and erection of Cable route marker as a board (instruction of supervision Authority) size 5x5 feet flat iron complete.

Line For Railway crossing

Cable laying charges (By HDD Method with HDPE Pipe, all require materials provided by contractor)

Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x300 mm² Outdoor

Laying of 33 KV ‘XLPE’ cable in air after providing 6” dia.M.S. pipe 3m long Complete work.

Special pipe earthing

cable route marker

Erection of Double pole structure on 9 mtr ST Pole for only Cable rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 65 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Double pole structure on 9 mtr ST Pole for only Cable rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 65 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Erection of Line Isolator Structure and install Line Isolator and earthing complete work.

charges of Plinth and foundation for 33 KV Feeder pillar box, Installation and related connection.

ARK ENGINEERING

M/s Anil kumar singh