Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.1 LAccepted-AOC | L1 | Accepted-AOC Being a lowest bidder | |
| 2 | L2₹43.7 L+₹75,493.28 (1.76%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹45.1 L+₹2.2 L (5.13%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹46.4 L+₹3.5 L (8.14%)Rejected-Finance 02 JAMEEWAR COMPLEX RING ROAD HANUMAN NAGAR GONDIA MAHARASHTRA 441614 | GONDIA | MAHARASHTRA | 441614 | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹46.9 L+₹4.0 L (9.26%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹43.6 L
EMD Value
₹87,300
Closing Date
9 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Bamrauli
GE (AF) Bamrauli
UPGRADATION/ IMPROVEMENT TO SANGAM KUTIR (BUILDING NO P-681) AT AF STN BAMRAULI
2024_MES_649716_1
8878/E8
Open Tender
Civil Works - Others
Works
180 days
GE (AF) Bamrauli
Please refer tender documents
7 documents required · 7 mandatory
₹500
GE (AF) Bamrauli
₹87,300
Yes
14 Jun 2024
9 Apr 2024
11 May 2024
9 Apr 2024
9 May 2024
27 Apr 2024
Amount
Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.
M&L for plain cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in any position etc complete all as specified and directed.
M&L for Anti-termite treatment at along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron etc all as specified and directed.
M&L for Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same etc all as specified and directed.
M&L for Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc all as specified and directed
M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge
Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge
S&F 1st Class Hard wood, Plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue painted at joints complete all as specified and directed.
S&F 40mm thick 1st class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides(feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats etc complete all as specified and directed
S&F 35mm thick 1st hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats including wire cloth etc complete all as specified and directed
S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.
S&F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc complete all as specified and directed
S&F 125mm size Butt hinges, extruded brass, with brass hinge pin, bright pol ished and fixed, type B-11 etc complete all as specified and directed
S&F 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified and directed
S&F 150mm long floor door stopper of ,brass body and tongue with hard drawn steel spring fixed in floor etc complete all as specified and directed
S&F 150mm long Extruded brass handles, fabricated type polished etc complete all as specified and directed
S&F for powder coated aluminium anodised window openable/fixed type/three track sliding type weighing not less than 1.35 Kg/RM including 5mm thick glass and wiremesh fixed with beading & rubber gasket. The aluminium member of shutter is 65x40mm alongwith aluminium handle & tower bolt / locking device for sliding shutters etc complete in all as specified and directed.
S&F for powder coated anodised aluminium frame partition including 5mm thick glass with door shutters with rubber gasket, joining cleat for fixing etc complete all as specified.
S&F Mortice lock, brass 4 lever vertical type, size 65 mm etc complete all as specified
M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new/old works with two or more coats complete all as specified and directed.
M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparing old surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.
Dismantling floor hearth or wall tilling including cement mortar bedding , removing serviceable tiles to stack and rubbish off the premises complete all as specified.
M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in leveling course etc complete all as specified and directed.
M&L for Screed bed or bedding layer of mortar (1:4) 20 mm thick for laying floor finishes complete all as specified.
M&L for 10 mm thick vitrified anti skid Endura max grip with pavement tiles each tile not exceeding 0.36 Sqm in floors etc coloured for floor / pavement etc & jointed in neat cement slurry and pointed with white cement mixed with colour pigment to match colour of tiles complete all as specified and directed.
M&L for Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.34 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:4) for lying floor finished complete all as specified.
M&L for Non Skid ceramic tiles coloured (square/ rectagular) area of each tile exceeding 0.09 Sqm but not exceeding 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:4) for lying floor finished complete all as specified.
M&L for Glazed ceramic coloured tiles area not exceeding 1.0 Sqm, 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) complete all as specified.
S&F in repair shower pannel made of anti-finger print stainless steel body, in-built ABS top shower with 60 nozzles+ water fall, 2 movable ABS body top shower with 60 nozzles+water fall, 2 moveable ABS body massage Jet, head shower with flexible hose, shelf, brass faucet body with thermostat mixer and 40 cm stainless steel barbed hose, multifunction water diverter for top shower, 1.5cm stainless steel double locked flexible hoses complete all as specified and directed. Make : Jaguar Cat No. SHP-SSF-ST88158B/Hindware Cat No. SS82WS-1520H20-BL or equvalent as approved by GE
Supply and fixed in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings, etc all as specified in Particular specifications.Make : Jaquar CAT no.FSS-WHT-29853S300UFSM/ Hindware Cat No.92595 Italian Collection Cora S-220 or equivalent as approved by GE.
Supply and fix in repair vitreous china counter wash hand basin snow white miniumum size 560mmx470mm fixed in grante slab including angle iron brackets below granite slabs & chromium plated brass coupling, complete all as specified in particular specifications. Make : Jaquar CAT No. JDS-WHT-25931/Hindware Cat No.91008 Italian Collection or equivalent as approved by GE.
M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.
S&F in repair bottle trap with necessary assembly etc complete all as specified and directed.Make JAQUAR CAT NO.ALD-CHR-769L250X190/Hindware Cat No.F850003CP or equivalent as approved by GE.
S&F chromium plated brass centre hole hot and cold mixer fixed in wash hand basin etc complete all as specifed. Make : Jaquar CAT NO.FLR-CHR-5167NB/Hindware Cat No.F530014CP or equivalent as approved by GE.
S&F PVC braided connection, complete all as specified and directed.
S&F toilet paper holder Make : Jaquar CAT No.ACN-CHR-1153S/Hindware Cat No.F450027CP or equivalent as approved by GE.
S&F Toughned glass as in hinged / sliding doors, partitions automatic doors and similar work including cutting to shape, drilling holes and reqd fixing all accessories like clamps cleat, fixing channel / Rod & Handle for door required etc complete all as specified and directed.Make:Jaquar Cat No.JSE-CHR-110D0680H19X/Hindware Cat No.SU11CWR-0912H22 or equivalent as approved by GE.
S/F in repair Towel rail 600mm all as specified (Make Jaquar or equivalent). Jaquar cat no:ACN-CHR-1111SM/Hindware Cat No.F580012CP or equivalent as approved by GE.
S/F in repair Towel ring all as specified (Make Jaquar equivalent). Jaquar cat no: AKP-CHR-35721P/Hindware Cat No. F580003CP or equivalent as approved by GE.
S/F in repair SOAP DISH holder all as specified (Make Jaquar . Jaquar cat no: AKP 35731P/Hindware Cat No. F880011CP as approved by Engr-in-chge.
S/F in repair Towel rack with lower hanger 600mm all as specified (Make Jaquar or equivalent). Jaquar cat no:AKP 35781P/Hindware Cat No.F880008CP as approved by Engr-in-chge.
S/F in repair SOAP dispenser with glass bottle holder all as specified (Make Jaquar or equivalent). Jaquar cat no:ACN-CHR-1135N/Hindware Cat No.F860060CP or equivalent as approved by GE.
S&F in repair two way bib taps chromium plated cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of bore 15mm complete.Make JAQUAR CAT NO.FLR-CHR-5041N/Hindware Cat No. F530004CP or equivalent as approved by GE.
S& F Mild steel chromium plated grating 100 mm dia, fixed in repairs to Nahani traps complete all as specified and directed.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified Make : Jaquar CAT Part No.ALD-CHR-573/Hindware Cat No.F160110CP or equivalent as approved by GE.
S&F angular stop cock (valve) with flange etc Make : Jaquar CAT NO.OPP-CHR-15083KPM/Hindware Cat No.F410006CP or equivalent as approved by GE.
S&F in repair fancy type glass corner shelf with CP brackets etc complete all as specifed and directed. Make : Jaquar CAT NO. ACN-CHR-1173 Glass Shelf - (Wall Mounted)/Hindware Cat No.F870011CP or equivalent as approved by GE.
S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete.Make: Jaquar Kubix Prime AKP-CHR-35771P)/Hindware Cat No.F880010CP or equivalent as approved by GE.
S&F in repair curtain rods 20 mm bore, mild steel, chromium plated with fixing brackets, stops, rollers, knobs/finials etc complete all as specified
S&F in repair venetian blinds vertical type, level or ultima 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement fixed to wall complete all as directed ( Make : Vista or equvalent).
Taking down existing aluminium windows/door/partition and re-fixing the same after minor repairs replacement of rubber beading , aluminium strips and windows shutter side locking arrangement etc complete all as specified and directed.
Hacking out old broken glass (any thickness and size or quality) from any frames glazed with putty or fixed with beads complete all as specified and directed. .
S&F sheet glass 4.8 mm, ordinary quality and glazing with oil putty/aluminium beading in any shape exc 0.5 sq. m in each pane fixed with rubber beeding complete all as specified and directed..
Dismantling boarding, like wall paneling or false ceiling in any description, fixed in any position with nails complete all as specified and directed.
S&F 605mm x 605mm size anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.
S& F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
S&F 12mm thickness gypsum board pannel including aluminium false ceiling snap grid frame work size 605 x 605 mm with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. etc all as specified and directed
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging of Fe-410-W(Gde-E250 quality B) also fastening and fixingcomplete all as specified and directed.
S&F Solar control film 50 micron reflective type sticked to glass panels as per manufacturer’s instructions complete all as specified and directed.
M&L for fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6M mean radius, built in cement mortar 1:6 etc complete all as specified and directed
M&L, rendering 15mm thick in cement mortar (1:4), on fair faces or brick work or concrete surfaces, finished even and other than fair face complete all as specified and directed.
S&F in repair Stainless steel plate rack of size 780x900x250mm fixed complete all as specified and directed.
Taking down 15 mm dia steel tubing and connections including accessary etc all as specified and directed.
Supply and fixing 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.
Taking down 20 mm dia steel tubing and connections including accessary etc all as specified and directed complete all as specified and directed.
Supply and fixing 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.
S&F Fibre glass reinforced translucent sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc
Supply and fix of 18 mm thick Celuka ply of prelaminated/ Rigid laminated of desired colour one side and other side plain colour fixed with screws/ solvent cement/adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets incl taking down of old unserviceable board complete as per specifications and as directed complete all as specified. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.)
Supply and fix of 17 mm thick MDF Board to make kitchen cabinet Shelves incl taking down of old unserviceable board complete as per specifications and as directed complete all as specified. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.)
Supply and fix of 18 mm thick Celuka ply one side prelam/rigid laminated and other side plain white colour to make kitchen cabinet Shutter/drawer front shutter incl taking down of old unserviceable board complete as per specifications and as directed complete all as specified. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.)
S&F of 150mm wide for frames for fishing of shutters with 36 mm thick (18mm thick back to back sticked) Celuka ply of prelaminated/ Rigid laminated of desired colour one side and other side plain colour fixed with screws , solvent cement/adhesive to make wall mounted kitchen cabinet back and pull out drawer sides incl taking down of old unserviceable board complete as per specifications and as directed complete all as specified. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.)
Supply only stainless steel (Grade S-304) basket (plain) of minimum size 50cm x 37cm x 10cm made of 4mm minimum dia S.S.Wire approved quality with suitable arrangement for fixing telescope channel complete all as specified and directed.
Supply only stainless steel (Grade S-304) thali basket (11-13 division) of minimum size 50cm x 37cm x 20cm made of 4mm minium S.S.Wire approved quality with suitable arrangement for fixing telescope basket Channel complete all as specified and directed.
Supply only stainless steel (Grade S-304) plate basket (11-13 division) of minimum size 50cm x 37cm x 16cm made of 4mm minimum dia S.S.Wire approved quality with suitable arrangement for fixing telescope Channel complete all as specified and directed.
Supply only stainless steel (Grade S-304) Partition basket of minimum size 50cm x 37cm x 16cm made of 4mm minimum thick S.S.Wire approved quality with suitable arrangement for fixing Telescope channel complete all as specified and directed..
Supply only stainless steel (grade S-304) Cutlary basket of minimum size 50cm x 37cm x 10cm made of 4mm minimum dia S.S.Wire and bottom of S S Perforated sheet approved quality with suitable arrangement for fixing Telescope channel complete all as specified and directed.
Supply only stainless steel (grade S-304) basket (plain) of minimum size 50cm x 37cm x 16cm made of minimum 4mm dia S.S.Wire approved quality with suitable arrangement for fixing telescope Channel complete all as specified and directed.
Supply only stainless steel (Grade S-304) bottle pullout of minimum size 50cm x 40cm x 16cm in two tier made of 4mm minimum dia S.S.Wire approved quality with suitable arrangement for fixing telescope Channel complete all as specified and directed.
Supply only stainless steel (Grade S-304) ball bearing telescope channel 20'' length (full extension mechanism) complete all as specified and directed.
Supply only Autocut Hydraulic (soft closing) stainless steel hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and directed.
Supply only 75 mm dia oval shape SS handle fancy type polished bright finish for kitchen cabinet shutter complete all as specified and directed.
Supply only 150 mm dia oval shape SS handle fancy type polished bright finish for kitchen cabinet shutter complete all as specified and directed.
M&L preparation of old treated steel surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint using Mechanical means complete all as specified
M & L for preparation of old decorated plastered/unplastered surface of walls and applying one coat of plastic emulsion paint complete all as specified and directed.
M&L for preparation of old decorated surface of ceiling and applying applying one coat of oil bound distemper complete all as specified and directed.
M & L for complete removal of existing treatment and applying 1.5 mm thick wall care putty with two coat plastic emulsion paint complete all as specified and directed.
M&L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint) Using Mechanical means complete all as specified and directed.
M&L for Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint of approved colour, complete all as specified and directed.
S&F awning (Aluminium frame with cover) etc complete all as specified and directed
S&F birds proofing plastic spikes etc complete all as specified and directed
M&L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including Modular metal flush box minimum 1.6 mm thick, Modular white cover plate with frame, of required module at site, fixed with chromium plated screws and washers for switches and sockets, including 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduit and making good disturbed surfaces area by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and directed for the following:- Note: - Cutting chase to wall wherever required shall be included in the rate quoted for point wiring.
(a) One light, fan, bell point controlled by one switch.
(b) One 3 pin switch socket outlet point 5 Amps on same board with other switch.
All as per item No. 95 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 Sqmm size.
M&L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 4 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including Modular metal flush box, Modular white cover plate with frame, of required module at site, fixed with chromium plated screws and washers for switches and sockets, including 4 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduit and making good disturbed surfaces by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and directed for Power socket 15 Amps on independent board.
M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge.
S&F Modular socket outlet 2 in 1, 5 pin, 6 Amps flush type white finish complete all as specified and as directed.
M&L for Modular socket outlet 2 in 1, 6 pins 6A and 16A, combined 2 module, complete all as specified and directed by Engineer in charge.
M&L for Modular switch 1 way 16A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge.
S&F ceiling rose surface backlite 65x50mm 3 terminals complete.
M&L for Modular bell push 5 Amps 230 V, AC circuit complete all as specified and directed.
M&L for call bell ding dong 230 V AC circuit complete all as specified and directed by Engr-in-Charge.
S&F 4 Module Gang box including Modular socket outlet 16 Amps for AC, 240 Volts flush type white finish including plug top 20 Amps with modular piano type switch 20 Amps and LED indicator (RED) incl concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 4 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings and Modular white cover plate with frame 4 module to accommodate all the accessories complete with internal connections, fixed with chromium plated screws and washers for switches and sockets, including 4 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduit and making good disturbed surfaces by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and as directed.
S&F recessed mounted 2'x2' LED luminaire suitable for grid ceiling with 100% indirect lighting,delivering soft and uniform light for excellent visual comfort of 42 watt 220 V AC including connecting up with three core flexible copper conductor cable of suitable size complete
S&F LED Bollard garden light 8 watt 220 V AC making base for garden including connecting up with three core flexible copper conductor cable of suitable size complete
S&F factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, stranded DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.
S&F factory made epoxy powder coated distribution board SPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, stranded DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.
S&F MCB single pole 240 volt 'B' curve 10 KA 5 to 32 Amps capacity all as specified and directed incl taking down old one.
S&F MCB single pole & neutral 240 volt 'C' curve 10 KA 63 Amps complete all as specified and directed .
M&L for concealed sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6.0 Sqmm of voltage rating up to and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 6.0 Sqmm (green colour) as earth continuity conductor all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit)
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 4 core
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core
Excavation in trenches in soft/loose soil n. exc 1.5 Mtr wide and not exc. 1.5 M deep and getting out including forming bottom surface for laying of pipes complete all as specified and directed.
Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25 mm thick complete all as specified and directed.
Removal of excavated material to a distance not exc 50 Meter and depositing where directed at a level not exc 1.5 M above the starting point complete all as specified and directed.
Supplying, laying and cushioning for cable protection in trenches 8 cm deep before laying cable and 15 cm deep over the cable including well punning complete all as specified and dierected
Supplying, laying sub class 'B' bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed.
S&F in replacement GI tubing light grade in trenches/fixed to wall/ceiling including required GI fitting of size 40mm dia complete all as specified and directed
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, buried directly in to ground ( earth pit) not less than 2.25 metres deep below GL with top edge of earth plate opt less attn. 1.50 m below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected to GI lead wire of 4 mm dia.(7.50 m Long) by means of nuts, bolts and washers, check nuts of GI and protected by the GI pipe light grade 15 mm nominal bore(7.5 m long) for earth lead wire and watering pipe light grade of 20 mm nominal bore, 0.63 mm thick G I sheet funnel , wire mesh, earthing test point etc complete including necessary earth work and excavation in any type of soil , PCC 1:2:4 type B1 earth pit and Precast RCC cover 65 mm thick duly reinforced with 6 mm dia. MS round bars @ 100mm C/C both ways, with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SI Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.
Supply, install, fixing and commissioning split type air conditioner of capacity 1.5 TR, five star rated,BEE 3.2 of capacity with cordless remote control unit and in built air ioniser, plasma filter for better indoor air quality, star rated suitable for wall mounted, single phase, 230/250 volt AC including breaking necessary hole in wall for fixing indoor and outdoor unit and making good to disturbed surfaces with cement mortar to match with existing finishes after commissioning, making necessary connections unplasticised PVC pipes medium duty 25 mm dia for draining out condensed water all as required including necessary connection complete all as specified and directed.
S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 150 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA
Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.
M/s Techno India and Company
M.R. ENTERPRISES
M/S R S Traders
M/S AM ENTERPRISES
Aditi Construction Company
M/S Aquarius Construction
M/S SATISH KUMAR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .