15th finance Commission Grant 2nd installment Tied 2023-2024 Drilling of Dia Borewell and Water supply Arrangement at 1st ward New Bus Stand and 10th ward Nayodai Well and Sump Pipeline in Kannivadi Town Panchayat Dindigul District

Charges for conducting Geological survey

Drilling of 150mm dia vertical bore well in hard rock area using bore well rig including conveyance and erecting of rig and all labor charges etc 0.00 m to 150.00m

Supply and fixing of 200mm CS dia PVC casing pipe including cost of materials and all labor charges etc.,

Supply and fixing of 200mm dia. PVC Borewell cover including alll labour chages and all T&P etc.,

Supply and delivery of Water supply Materials inculding loading, unloding and transporting etc., complete 5 HP Submercible motor (Motor should give 50 LPM X 175 M head)

5HP Panel board

4.00 sq.mm submercible cable

40mm dia ISI UPVC Pipe

5 HP Submercible motor (Motor should give 50 LPM X 75 M head) Monobloc-Openwell

5HP Panel board

40mm dia. Hex Nipple

40mm dia. GI Union

40 mm x32mmdia.GI Reducer

32mm dia ISI G.I. Pipe

32 mm dia. GI Ellbow

32 mm dia. GI coupling(Heavy)

65 mm GI B Class Pipe

65 mm GM Gate valve

65mm GI Coupling

Bore Kitty

40mm dia ISI Gate valve

90 mm 6KG PVC Pipe

Lowering PVC pipes and specials to laying to proper grade and alignment and as directed by the Technical Officers.

Refillingwithexcavatedsoil (otherthansand)complying with the standard specification for filling in foundation and basement

Supplying and fixing of32A aerial fuse unit for 3 Nos fuse units (500v) on suitable TW concelled box with hylam sheet on the tapping pole with necessary clamps. SD132

Supply and run of 4 of 6 sq.mm PVC insulated (Heavy Duty) SC unsheathed Cu.conductor of 1100 V Grade on 7/20 GI bearer wire for service connection mains(SD68)

Supply and run of 4 of 6 sq.mm PVC insulated (Heavy Duty) SC unsheathed Cu.conductor of 1100 V Grade in 32mm GI Pipe suitably bent at both ends with necessary angle iron upright and end supports for mains(SD73)

Supply and fixing of TNEB meter board suitable for 32A Three phase service connection with 32A fuse unit (500V) 32Aneutral link and earth link (1"X1/8"copper flat) on TW plank of size 600mmX450mmX19mm with supporting TW reepers of 1" tk.on either side (SD127)

Erection of power pumps in borewell labour charges for erection of twin packer duplex type jet pumps in borewells upto 150 mm dia including fixing of Suction pipe regulating valves with jet assembly upto a maximum depth of 30 m and delivery pipe valves pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three indicator lamps capacitor and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumps and trail run for 10 days including signing of completion of reports as required by EB authorities and finishing the pipe holes including the foundation bolts, nuts and earth pits.

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10 with standard specifications.

Plain Cement Concrete 1:4:8 mix ( One Part of Cement,Four Part of Sand and Eight Part of aggregates) using 40 mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying,consolidating and curing etc complete as per the standard specifications. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Reinforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

MOHAMED RASMI H