Kallakurichi - Circuit House Building Internal and External Electrification

Amount

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End

Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Supply and fixing of 7 W LED for BH point.

Supply and fixing of 7W wall bracket fitting complete with TW round blocks on wall with 7 W W LED light (Make like Havells / equivalant) with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of 14 W mirror lamp Fitting . (Crompton make (Cat No. LCL-14-CDL / Equivalent) .

Supply and fixing of 7 W bed reading lamp Fitting (Crompton make (Cat No. LCL-07-CDL / Equivalent) .

Supply and fixing of 20 W IP65 surface panel light fitting (Make like Luker Cat No. LOR65 20 / equivalant) with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of Recess mounted downlighter with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integrated driver down lighter fittings (Havels model No. INTEGRANEODLR10WLED830S / Equivalent ) on ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of Aesthetically desined ultra modern 34 W 2' x 2'recessed Mounting luminaire with high brightness LED fitting (Havels model No. PLUTO NEO 2X2 PLR 34W LED857S / Equivalent ) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of single box type 4' 18 W LED fitting complete with TW round blocks on wall or ceiling with 18 W LED tube light with double side connection ( Havells / equivalant) with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of Twin box type 4' 18 W LED fitting complete with TW round blocks on wall or ceiling with 18 W LED tube light with double side connection ( Havells / equivalant) with conduit pipe suspension, with PVC unsheathed Copper leads from terminals to the fitting.

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod on the existing fan clamp

Supply and fixing of 300 mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of louvers shutters arrangements for 300 mm (12") sweep (light duty) AC exhaust fan.

Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 25 A flush type wall socket with 25 A DP MCB in suitable sheet steel enclosure like Havells / equivalent in flush with wall with earth connection.

Supply and fixing of 32A FP MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection The FP MCB & Enclosure should be of Legrand / Hager make

Supply and fixing of 63A FP Isolator in suitable FP sheet enclosure in flush with wall and making good of the concealed portion with earth connection. The MCBIsolator & Enclosure should be of Legrand (MDS)/Hager(L&T) make.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40 A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Lower End

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and fixing of Three phase Seven Segment type 4 way 63A distribution board with Metal Door cover Code IP42 Protection , with 63A 4 pole ELCB 30 mA as incoming and Sub incomers 3 Nos 40A DP ELCB and 12Nos 6-32A SPMCB as Outgoing on Wall with earth connection only. The MCB DB and MCB’s should be with ISI mark. (Hager/legrand)

Supply and fixing of Vertical type 4 way triple pole netural MCB distribution board double door type with 100 A 4 pole MCB isolator as incoming , 4 Nos 63A TPMCB as outgoing inflush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be Like Hager / Legrand / equivalent.

Supply and fixing of Vertical type 6 way triple pole netural MCB distribution board double door type with 100 A 4 pole MCB isolator as incoming , 9 Nos 6 to 32 A SPMCB and 3 Nos 63 A TP MCB as outgoing inflush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be Like Crabtree.

Supply and fixing of Vertical type 6 way triple pole netural MCB distribution board double door type with 63 A 4 pole MCB isolator as incoming , 18 Nos 6 to 32 A SPMCB as outgoing inflush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be Like Crabtree.

Supply and erection of 250 Amps Capacity dust and vermin proof floor mounting cubical panel board fabricated out of 16 SWG MS sheet for outer body, stiffness and doors and with supply and fixing of following interior switches with centre bus bar chamber and vertical no of switches one over the other on both sides of bus bar chamber with cable adopter chamber of the extreme wnd of one side with two coats of quality paint over one coat of zinc oxide primer superscription of incoming and outgoing feeding cable details, capacity of switches etc., with white paint and 2 nos metallic danger board affixed complete on base channel supports to satisfy the latest CEIG rules with the following switches confirming to IS specifications. 1] 250 A FP switch disconnector fuse interior only with HRC fuses double break - 1No [L & T / Siemens] 1] 100 A FP switch disconnector fuse interior only with HRC fuses double break - 7 No [L & T / Siemens] 2]63A TPN switch disconnector fuse interior only with HRC fuses double break - 1 No. [L & T / Siemens].

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour. (SD-57) (For 15 A Plug)

Supply and run of 2 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour

Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour

Supply and run of 4 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour

Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.

Supply and run of 4 of 16 sq. mm (101/0.45) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and Laying of 3 1/2 x 185 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clarnping of 3 1/2 x 185 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and clarnping of 3 1/2 x 70 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3 1/2 x 185 sqmm PVC LTUG Aluminium armoured cable with earth connection

Supply and fixing of brass cable gland for 3 1/2 x 70 sqmm PVC LTUG Aluminium armoured cable with earth connection

Supply and providing cable end termination of 3 1/2 x 185 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Supply and providing cable end termination of 3 1/2 x 70 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and fixing of dust and vermin proof cubical type LTCT metering box of size 4ft x 3ftx 2ft made of 16SWG sheet steel with door, lock and key arrangements with angle iron support comprising of three compartments one for 3 phase energy meter with base plate another for bus bar arrangments with 4nos 2" x 1/4" insulated tinned Cu bus bar for 3phases and natural with 3nos 200A/5A Cts of reputed make and another compartment with 3nos 200A fuse units and MS cable entry box with view glass with danger board, powder coated painting and 19/16PVC insulated Cu wire for interconnection from meter to fuse unit

Supply erection, Testing and commissioning of 2 TR split type 5 star rated AC units fitted with hermetically sealed Air compressor with R22 refrigerant air cooled condenser, fan etc. and 1 No indoor Hi wall mounted 2.0 TR capacity evaporator unit complete with cooling coil, blower motor and connected accessories, control etc chord wire connecting indoor and outdoor unit with drain pipe suitable for operation on 230V + 10% 50Hz sinle phase AC supply. (Make - Carrier/ OGeneral/ Daikin/ Toshiba)

Supply and fixing of 5 KVA voltage stabilizer (V guard /Eq.make ) suitable for 2.0 tons capacity split type air conditioner with 3 minutes time delay and low / high voltage cut off switch (wall mounting) with necessary wire connection.

Supply and Fixing of MS stand for fixing outdoor units.

Supply and fixing of 1500W automatic electric water heater of 35 litres capacity suitable for 230V 50 c/s AC supply on suitable MS clamps with 3 core flex wire but without plumbing connection

Supply and fixing of 3KVA Automatic invertor with input Voltage 180V-260V and output voltage 200V -230V 50Hz with 4 No 12V 150AH tubulur Battery and testing complete with connection. (Make Luminous/equ)

Supply and fixing of 100 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only

KVR Electrical Contractor

SKN Electrical works