Construction of Anganavadi Building-01 at K-BASAVANAPURA Village Chamarajanagara Taluk

Construction of Anganavadi Building-01 at K-BASAVANAPURA Village Chamarajanagara Taluk

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification

I.S. 3620/1979 having compressive strength not less than ...

Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification

I.S. 3620/1979 having compressive strength not less than ...

Filling available excavated earth (excluding rock)

in trenches, plinth, sides of foundations and other

similar works etc. in layers not exceeding 20cm in

depth, consolidating each deposited layer by r...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

For Plinth Concrete

Loft store/wash

Percentage Additionalities for formwork, centering & scaffolding RCC ROOF Slabs 50%

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining,

including cost of materials, labour, curing as per s...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm

thickness, including hinges, jamb, lock jamb, bead and if required angle...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Providing Electrification work Roof Pipe Laying and inside wall Pipe Fixing