Loading
Loading…
Loading…
Tender Value
₹24.3 L
EMD Value
₹48,540
Closing Date
18 Sept 2026, 4:00 pm5d left
Er. Pawan Tickoo
Executive Engineer PWD RandB Electric Div Jammu
please refer BOQ
2026_PWDJK_324157_1
e-NIT No. EDJ/ 97 of 2026-2027 Dated 09-09-2026
Open Tender
Electrical Works
Percentage
90 days
Bawe Wali Mata temple Jammu
please refer to NIT
2 documents required · 2 mandatory
₹600
Executive Engineer PWD RandB Electric Div Jammu
₹48,540
10 Sept 2026
10 Sept 2026
19 Sept 2026
10 Sept 2026
18 Sept 2026
10 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply, Installation, Testing and Commissioning of LED RGB/RGBW floodlighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, of following wattage. Luminaire shall be capable of producing dynamic color changing light for with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9 . Fixture shall be suitable to operate at an ambient temperature range of - 10°C to +50°C and shall be IP 65 and IK 06 rated. Lifetime shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS 10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. MS Cage cover for Protection of RGBW floodlighting against Monkey Menace. Design of cage as approved by Engineer-in-charge. | |||||
| 1.01 | 150 watt | 4 | Nos | 57,000 | ₹2,28,000 |
| 1.02 | 180- 200 watt | 11 | Nos | 75,000 | ₹8,25,000 |
| 2Supply, Installation, Testing and Commissioning of LED RGB/ RGBW Linear Wall Washer luminaire for Facade lighting with aluminium extruded housing, of following wattage. Luminaire shall be capable of producing dynamic color changing light with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement.Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 to 270 V AC, 50 Hz, power factor > 0.9 . Fixture shall be suitable to operate at ambient temperature range of -10°C to +50°C and shall be IP 65 and IK06 rated. Lifetime should be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS and shall be completewith all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. MS Cage cover for Protection of RGBWRGB/ RGBW Linear Wall Washer against Monkey Menace. Design of cage as approved by Engineer-in-charge. | |||||
| 2.01 | 90-100 watt (1000 mm) | 2 | Nos. | 60,000 | ₹1,20,000 |
| 2.02 | 25 watt (1000 mm) | 2 | Nos. | 23,000 | ₹46,000 |
| 2.03 | 12-15 watt (300 mm) | 8 | Nos. | 12,000 | ₹96,000 |
| 3SITC of high quality long through multi color 12W RGBW Spot light light, Protection Rating : IP66 or Higher, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598-1:2015", and "Electromagnetic Compatibility Directive - EN 61547: 2009", Mounting Structure : Adjustable surface mount yoke arrangements for fixing the lights. LED fixture with 5050 LED of system lumens 1100lm, Power Consumption: 12W, CCT : RGBW(3000-7000K) as per the design approval, CRI for white : >80, SDCM <3, Optics : PMMA with holder, Beam Angle : 25º/45º/60º, Control : DmX512 Channel : 4 CH, Body : Die casted / extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : Constant DC 24V with external driver to the constant current decoder, Surge Protection : Inbuilt surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), | |||||
| 3.01 | Toughened transparent glass having the IK protection: IK08 or higher, Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, The light fixtures should have IP68 air vent made up of brass/stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 60,000 burning hours at L70 at 55 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 70 micron Copper, 2W TC with Black or White masking, Copper/OSP finish. LM79, IK08, IP66, Surge, Endurance and Thermal test from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with IP68 connector having the length >300mm. BIS, CE & RoHS Certificates along with tender documents, Fixture body color has to match with Building color. | 12 | Nos | 12,296 | ₹1,47,552 |
| 4Supply, Installation , Testing and commissioning of LED projector light fixture LED, MONO, IP 66 with wide beam The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant. Protection screen with tempered glass with high impact resistance IK07. Voltage input AC240V . The luminaire should have options for various beam angle: 10°/25°/50°/60°. Estimated LED Lifetime is L70-100,000 hours minimum@ 25degree Ambient Temperature and LEDs of CREE / OSRAM / NICHIA to be used. Minimum Light fixture Lumen output atleast 3000 Lumens. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements.Job includes all civil work for installation of lights at desired location with the help to frame/angle/nut bolts for monkey meance as directed by Engineer-in-charge. Manufectures word Mark/ Name Engraved/ Embossing / Screen Prionting on die cast housing to allw traceability/ authenticity. (LM70/LM80) certificate/report with liable warranty of product/accessories from OEM shall be submitted.. The Minimum warranty shall be for 2 years. .Job includes all civil work for installation of lights at desired location with the help to frame/angle/nut bolts/Iron Galvanized Razor Blade Wire for monkey meance as directed by Engineer-in-charge. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
BOQ_1093070.xls
BOQ • 0.59 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .