Kanniyakumari District Suchindrum Ayothidhasar Pandithar

Amount

Dismantling Brick work including cost and conveynace and all labour charges etc. complete.

Brick work in cement mortar 1:5 mix using (One cement and five sand) using best quality of III class Country bricks of size (8 3/4"x4 1/4"x 2 3/4") for foundation including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification TNDSS specification No.31 & 31C

Supplying and erecting steel centering for sides and soffits including supports and strutting upto 3.29 m height for plain surface as RCC slabs, rectangular tee (or) elbeams, lintel, bed block stair case waist slab, landing slab, etc., complete as per standard specification - 10m2 as per TNDSS & Morth specification No:30 & 36

Reinforced cement concrete 1:11/2:3 (one cement one and half sand and three aggregate) using 20mm size I.S.S. metal including cost conveyance of materials to site and all labour charges etc., mixing laying consolidating curring etc., but excluding cost of steel etc., complete as per standard specification as per TNDSS NO: 30 V,VI (S3) VII-3

Supplying, fabricating and placing in position of mild steel or TMT rods, including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per SS. TNDSS NO: 97 V,VI (S6) VII (S6) VII-3

Plastering in cement mortar 1:3 (one cement three sand) using 10mm thick including cost and conveyance of all materials and labour charges etc, complete as per standard specification. [MORTH Specification: Clause:1000/1300]

Plastering in cement mortar 1:5 (one cement, five sand) using 12mm thick including cost and conveyance of all materials and labour charges etc, complete as per standard specification. TNDSS NO: 61 V,VI (S4)

Paving the floor with Plain/Design Ceramic tiles ( Colour and shade as directed ) of Stain Free Nano Polish Vitrified Tiles of size 600 x 600 x 8mm in all floors over a base layer of cm 1:3 mix 20mm thick laid in situ and pointed with same coloured cement ( white cement mixed with colouring pigment ) neatly and fixed in position so as to make it perfectly smooth and shining,to the alignment etc.complete complying with standared specifications and as directed by the departmental officers. The sample colour and shade of the ceramic tiles should be got approved from the departmental officers before use in the works

Plain Cement concrete 1:2:4 (one cement, two sand and four aggregates) using 20mm ISS HBG metal including cost of all materials and labour charges for mixing, laying, compacting and curing etc, complete as per standard specifications. TNDSS NO: 30 V,VI (S3) VII-3

Supply and fixing of mild steel grill works for windows, ventilators, etc including redoxide priming coat and cost of materials and all labour charges etc. complete.

Supplying, fabricating and fixing of position of Aluminium anodised natural colour matt finish sliding windows in all floors with sliding arrangements and gutter arrangements so as a drain the water entering. For two track windows the outer frames being made with Aluminium Extruded track sections of size 62 x 37 x 1.50 mm @ 1.218 kg/m at bottom and section of 62 x 31.5 x 1.50 mm @ 0.778 kg/m for Top and vertical frames. For Three track windows the outer frames being made with Aluminium extruded track sections of size 92.34 x 39 x 1.50 mm @ 1.637 kg/m at bottom and section of 92.34 x 39 x 1.50 mm @ 1.066 kg/m for top and vertical frames. For four track windows the outer frames being made with Aluminium extruded track sections of size 123.02 x 29.70 x 1.50 mm @ 1.502 kg/m at bottom and section of 123.02 x 29.70 x 1.50 @ 1.294 kg/m for top and vertical frames. The shutters shall be made out of Aluminium extruded sections of 40 x 18 x 1.50 mm @ 0.38 kg/m for the top, 40 x 148 x 1.5 mm @ 40 x 18 x 1.50 mm @ 0.493 kg/m for the bottom and vertical and with 40 x 29 x 1.50 mm @ 0.632 kg/m for the vertical lock style. The panels shall be using suitable rubber beadings. The rate shall be inclusive

Granolithic Floor finishing with Cement Concrete 1:2:4 (One part of cement, two parts of sand and four parts of ISS HBG metal) mix using 10mm to 12mm ISS size HBG metal to 25mm thick including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:39-F (20mm thick)

Painting two coats over new iron work with ready mixed paint of apprved quality and colour including cost of all materials and labour charges etc complete as per SS

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A (Sl.No.358)

Wiring with 2 x 1.5 sq.mm PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories and with TW switch box and 5A flush type switch with wall with 3mm hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (SD-24)

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point (SD-40)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush type wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type suitable colour for concealed PVC plug point (SD-38)

Supply and fixing of 1200mm (48”) AC ceiling fan complete with stepped electronic 300W regulator with 1 meter down rod on the existing clamp (SD-107)

Supply and fixing of single box type 4’ 40W flu. fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu. Tube with PVC unsheathed copper leads from terminals to the fitting (SD-88)

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7/20 GI bearer wire for service connection mains (SD-65)

Supply and run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class ‘B’) suitably bent at both ends with necessary angle iron upright and end supports for mains (SD-70)

Supply and fixing of fancy glass shade and 7W / 9W LED bulb (SD-79)

Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb (SD-84)

Supply and fixing of Galvalum sheet (Pre painted) 6mm thick including 15cm lapping roofing with necessary 'J' bolt and nut, bitumen washer and Screws if wooden baterns including cost and conveyance of all materials and all labour charges etc Complete complying with Standard specifications.

Supplying and fixing of steel TRUSSES work using MS angles and 'T' sections each according to design approved by the departmental officers including cutting, welding and cost of conveyance and all materials to work site.

Y.BEBIN (BID ID -1123708)