Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.8 LAccepted-AOC | L1 | Accepted-AOC Lowest bid. | |
| 2 | L2₹37.7 L+₹8,428.65 (0.22%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bid. | |
| 3 | L3₹40.0 L+₹2.4 L (6.29%)Rejected-Finance SAHEED UDHAM SINGH NAGAR THANDI KHUEE SUJANPUR PATHANKOT 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | L3 | Rejected-Finance Other than lowest bid. | |
| 4 | L4₹41.7 L+₹4.1 L (10.9%)Rejected-Finance H NO B III 95 MOHALLA GHARTHOLI MISSION ROAD PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-Finance Other than lowest bid. |
Tender Value
₹41.3 L
EMD Value
₹82,660
Closing Date
4 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SOUTH MAMUN
GE (South) Mamun, MES Complex, Mamun Cantt, Pathankot
As specified in BOQ and Tender Documents
2024_MES_671469_1
GE(S)/M-39/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE (South) Mamun, MES Complex, Mamun Cantt, Pathan
As per NIT
10 documents required · 10 mandatory
₹500
GE SOUTH MAMUN
₹82,660
Yes
1 Jan 2025
5 Sept 2024
11 Oct 2024
5 Sept 2024
4 Oct 2024
20 Sept 2024
Amount
Excavating in trenches in any type of soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed.
Excavating in post holes each n exc 0.50 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc. 50 m and making surface good complete all as specified and directed.
Returning filling in including spreading, leveling and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and directed.
Removing surplus excavated material to a distance not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
Surface dressing n exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil as specified. complete all as specified and directed.
M&L for hard core of gauge n exc 63 mm deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface,complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as bed plates, kerbs, plinth course, embedded to interlocking tiles complete all as specified and directed.
M&L for RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in beams,seismic and other similar bands, coping to top of brick work, cantilever, bressummers, bed plates, apex stone, plinth course lintels upto 1.5m span complete all as specified and directed.
M&L for RCC M-25 nominal mix using 20 mm graded crushed stone aggregates) as in col & slab supported on walls,beams and columns in floors, roofs, landings,deck slabs, lintets and shelves and like etc. complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in foundation, foundation of man holes, filling and mass concrete complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in sub floor finish the surface even and rough to receive top floor finishes complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.
M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in floor surfaces finished even and smooth using extra cement complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in sub base surfaces finished even and rough to receive top floor finish complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6, type C-1, using 20mm graded stone aggregate as in plinth protection, finished even and smooth using extra cement, incl forming necessary joint and filling with mixture of paving bitumen & sand in 1:3 complete all as specified and directed.
M&L for form work to sides and soffits of floor or roof beams, beam haunchings, lintles, cantilevers shelves etc. also splays between floors and beams etc.rough finished surfaces of concrete - flat complete all as specified and directed.
M&L for use & waste of form work to sides & soffits of suspended slabs, such as roof slabs, floor slabs, landings and similar work not exc 200mm thick, complete all as specified and directed.
M&Lfor use & waste of form work to edges of concrete flat, treads, brakes in floor, floors and roofs n. exc 20cm wide and sides of RCC/PCC band in walls, horizontal and sloping and similar work exc. 10cm but n exc 20 cm wide, complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, dressed stone work including removal of debris from site & deposited where directed complete all as specified and directed.
M&L for brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specifiedand directed.
M&L for brickwork with Fly Ash Bricks (old size), half brick thick wall straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:4 complete all as specifiedand directed.
M&L for glossy finish coloured chequred cement tiles 30cmx30cm x25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over screed bed or bedding layer of morters 15 mm thick in cement morter 1:6 including demolation of existing tiles complete all as specified and directed.
M&L for bricks, sub class B bricks, laid flat in floors, bedded and jointed in CM 1:6, old size bricks, and pointed in cement morter 1:3, complete all as specified and directed.
Taking down cement plaster, hacking for keys, raking out joints, of old brick wor kbuilt in cement morter and scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick plaster in two layers, 5mm thick in cement mortar 1:4 over 10 mm thick cement morter in CM 1:6, mixed with liquid water proofing compound finished even and smooth without using extra cement, including preparation of new surfaces of walls and applying two coat of cement based paint, white or tinted over a coat of primer including curing before & after paint complete all as specified and directed. Note :- WPC shall be measured and paid separately as supply only.
M&L for rendering 15 mm thick plaster in two layers, 5mm thick in cement mortar 1:4 over 10 mm thick cement morter in CM 1:6, mixed with liquid water proofing compound finished even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately as supply only.
M&L for key pointing to new brick wall surfaces, in CM 1:4 complete all as specified and directed.
M&L for rendering 10mm thick plaster in cement mortar 1:6, on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick plaster in cement mortar 1:6, on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 10mm thick plaster in cement mortar 1:6, on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 10 mm thick plaster in Cement morter 1:3, mixed with WPC @ 200 ml/50 kgbag of cement on roof slab when concrete is still green including finished the surface even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid for separately as supply only.
Supply only liquid water proofing compound complete all as specified and directed.
M&L for rendering 5mm thick cement plaster in cement mortar 1 :3 on ceiling surfaces and finished even and smooth without using extra cement including preparation of newly plastered or surfaces of walls and applying three coats of white wash complete all as specified and directed.
Preparation of newly plastered surfaces of walls and applying 2mm thick wall care putty, making the surface smooth by rubbing with sand paper and applying two coats of oil emulsion distemper complete all as specified and directed.
M&L for preparation of newly plastered or surfaces of walls and applying three coats of white wash complete all as specified and directed.
M&L for reparation of newly plastered surfaces of external wall and applying two coats of cement base paint over a coat of alkali primer, including curing before and after painting, complete all as specified and directed.
M&L for preparation of newly surfaces of steel of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.
M&L for preparation of new untreated surface of steel of any description not other wise described over 10cm width or girth and applying two coat of synthetic enamel paint, over a coat of red oxide primer complete all as specified and directed.
M&L for complete removal of existing treatment, preparation of surfaces, making the surface even & smooth and applying two coats of oil emulsion distemper including priming surface with chalk whitening complete all as specified and directed.
M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjas / canopy / parapet wall, to be executed through approved applicator of the membrane manufactured with following specifications, complete all as specified and directed :- (a) Cleaning the top surface of RCC roofing properly with water. (b) Applying bitumen primer @ 0.30 Litre / Sqm, manufactured by the same agency as that of APP with a density 0.87-0.89 KG / Litre at 25 degree centigrade on prepared surface. (c) Laying of membrane not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 KG/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10cm overlap and 15cm end lap. (d) Top of membrane shall be provided with solar reflective bituminous aluminum paint @ 0.10 KG / Sqm as prescribed by manufacturer of membrane. (e) APP Membrane shall be stick inside parapet where available by cutting, chases and sealed with PCC 1:2:4, type B-0.
S&F flue pipes of mild steel, 250 mm in dia black in suitable length, fixed to wall complete all as specified and directed.
S&F cowls (with three ways) riveted to and including 15cm lengthof flue pipe with 250 mm dia mild steel as approved, fixed to pipe complete all as specified and directed.
S&F hard drawn steel wire fabric cut to length, bend to shape required and tying with and including mild steel wire (annealed) not less than 0.9 mm dia & weight n exc 4 Kg/m complete all as specified and directed.
M&L for 1.6 mm thick mild steel plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched,included round headed screws,clout nails or rivets and fixed to wood of steel frame with plain 40mm lap joints, including welding or turning up, mittred angles, etc as required complete all as specified and directed.
Demolition of concrete interlocking paver block of any shape and size as in floors laid dry, complete all as specified and directed.
M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size having high glossy finish confirming to IS 15658-2006 of 60mm thickness epoxy coated, M-35 Grade, laid dry over and including 50mm thick sand cushion using clean & washed river sand as approved complete all as specified and directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) area not exc. 1.5 Sqm each, complete all as specified and directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) area exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified and directed.
S&F factory made single extruded WPC (Wood Polymer Composit) solid door/windows/ceosetory windows & other frames/chowkhat of size 50 x 125 mm comprising of vigin PVC polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) fabricated with mitre joints after applying PVC solvent cement and screwed with fully body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrwal strenght of 2200N (face), 1100n (edge), minimum compressive strength 58 N/Sqmm , modulas of elasticity 900N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixed position MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- MS hold fasts/lugs or SS fasteners shall bemeasured and paid separately
S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 30mm thickness comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately)
S&F 35 mm thick factory made wire guazed and skeleton shutters (2nd class hardwood) , open rebated and prepared to receive wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing wire cloth, etc.; sizes of me-mbers of shutters as specified fitted to chowkats including preparation of surfaces of shutters and application of two coats of synthetic enamel paint over a coat of pink primer, etc complete all as specified and directed.
S&F factory made solid PVC moulded door shutter with PVC board core 30mm thick (stile) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet Polyurethane painted on the front face & 2mm Prelamination PVC sheet on back face and fixing in the frame as per specifications and complete all as specified and directed.
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 45 x 70 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete. (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately) Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. deapth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F Box type factory made Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube 60 mm X 125 mm with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg, welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts fixed in PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.
S & F in repair for 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed to door at floor level complete all as specified and directed.
S&F150mm size extruded aluminium alloy handle fabricated adodized ISI marks, complete all as specified & directed.
S&F 20mm bore mild steel drapery rod with I mm thick PVC wood grain coating including brackets and knobs fixing on windows and doors for hanging curtains complete all as specified and directed.
S&F GI wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/aluminium beads complete all as specified and directed.
S&F 100 mm long Butt hinges type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.
S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 3mm thick Figured glass, pinhead type in squares n exc 0.5 sq. m each pane fixed with oil putty complete all as specified and directed.
S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
M&L for cutting chases pinning in brickwork for consealing water tubing and making good to facing where required and pointing in CM 1:4, cutting not exe 10 cm girth complete all as specified and directed.
S&F steel water tubing 15 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and directed.
S&F steel water tubing 20 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and directed.
S&F Rotational moulded polyethlene water storage tank, 1000 ltrs capacity, three layers, ISI marked, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed refixing of inlet, outlet & over flow pipe etc. (Minimum weight of 20mm ball valve - 210 gms including dismantling of old brocken water tank complete all as specified and as directed.
S&F Stop valve/Angle valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore ccomplete all as specified and as directed.
S&F 15mm bore bib tap, fancy type, with flange, cast copper alloy fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F Stop valve/Angle valve (ISI Marked), long shank and cup, consealed, fancy type cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore ccomplete all as specified and as directed.
S&F brass chromium plated soap dish with and including CP screws complete all as specified and as directed.
S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover with hinging device for pedestal pan and connecting etc, complete all as specified and directed.
S&F in repairs health faucet with 8 mm dia,1.2 m long Rubber flexible tube with Chromium plated spring type cover & Wall Hook for water closet complete all as specified and directed.
S&F in repairs CP Brass shower rose 75 mm size with brass chromium plated flexible arm 450-550mm long complete all as specified and directed.
S&F PVC connection 15 mm bore with PTMT nuts of length 450 mm long complete all as specified and directed.
S&F in repairs CP brass towel ring 20mm dia, fancy type, superior quality, fixed with and including chromium plated screws and wooden/plastic cleats complete all as specified and directed. complete all as specified and directed.
S&F in repairs PVC low level, push button, dual flush type flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet ball valve and handle with and including brackets and PVC bend pipe 60/90cm long etc, complete all as specified and directed.
S&F in repairs Vitreous china wash basin, oval shape, counter sunk, white, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but inclluding vitreous china pedestal and PVC waste pipe with union, 32 mm dia complete all as specified and directed.
S&F gun metal globe or gate valves, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore complete all as specified and as directed.
S&F in repairs 75mm bore PVC (SWR) floor trap, plain excluding grating including jointing with solvent cement, complete all as specified and directed.
S&F grating round 140 mm of size PTMT (minimum weight 50 gms) fixing in floors complete all as specified and directed.
S&F in repairs 75 mm dia bore PVC (SWR) cowl complete all as specified and directed.
S&F in repairs 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.
S&F in repairs 75 mm bore PVC (SWR) bend, plain with or without oval access, including jointing with solvent cement, complete all as specified and directed.
M&L for mild steel work as in handles of cover slab and rungs and similar small articles complete all as specified and directed.
M&L for cutting into existing manholes for connecting new drains (150 mm bore pipe) and rendering cutting out existing into existing branches for forming branch channels (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and forming channels as required, complete all as specified and directed.
M&L for PCC 1:4:8 type D-1 (using 20 mm graded crushed stone aggregates) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in, complete all as specified and directed.
M&L for 100 mm internal dia SGSW drain pipe grade A laid to slope in trenches, jointed in cement morter (1:1) and tested complete all as specified and directed.
M&L for 150 mm internal dia SGSW drain pipe grade A laid to slope in trenches, jointed in cement morter (1:1) and tested complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in coping & in bedding & haunching against the sides of wall of manholes complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in man hole covers slabs and similar articles placed in positions of wall of manholes complete all as specified and directed.
S&F 150 mm dia RCC NP3 pipes with collars laid in trenchesand jointed complete all as specified and directed.
M&L for Septic tank 10 Users designed to carry sewage and sullage water, complete including excavation and earth work in any type of soil, PCC 1:4:8 under foundation, RCC M-30 Design Mix in Roof Slab PVC rungs etc including Vent shaft , manhole openings with cover and making connection etc., of effective depth 1.5 metre and overall depth of 3 metre complete all as described and shown on Drg No CEPZ/C-TD/013 /13 dated 11 -09- 2013 sheet 1/5 to 5/5.
M&L for Soakage wells of size 1.80m dia x 3.00 m depth including excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed brick masonry in CM 1:4 with sub class B bricks, top ring of RCC, M-25 design mix concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M-25 design mix & SFRC MH cover incl interconnecting pipes of RCC/DWC complete filled with brick bats complete all as shown on Drg No CEPZ/C-TD/013 /13 dated 11 -09- 2013 sheet 1/5 to 5/5 .
M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed .
M&L for glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, etc., set and jointed in neat cement slurry and pointed with coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.
M&L for Vitrified ceremic tiles, polished, light shade, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 18.00 Sqm but not exceeding 0.38 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:4 and including 25 mm thick cement concrete (1:2:4) type B-0 as levelling course(using 12.5 mm garded crushed stone aggregates) finished surface even and rough to receive floor topping including demolation of damaged floor of any description and removal of debris out of prtemises etc. complete all as specified & directed.
Taking down wooden roof trusses coupled rafters of span exc 4m but n exc. 8m etc. complete all as specified and directed.
Dismantling timber scantling 40 Sqcm & over in section, in unframed work etc. complete all as specified and directed.
S&F tubular framed steel trusses made out of medium grade tube (ERW or induction butt welded) confirming to IS-1161-1979Grade St-240 Quality A, including welding of distance pieces , cleats, and application of applying two coat of synthetic enamel paint, over a coat of red oxide primer complete all as specified and directed.
S&F tubular purlins,rafter and other sections fixed independently made out of medium grade tube (ERW or induction butt welded) confirming to IS-1161-1979 Grade St-240 Quality A, including welding of distance pieces , cleats, and application of applying two coat of synthetic enamel paint, over a coat of red oxide primer complete all as specified and directed.
M&L for mild steel framed work as in doors, gates, other sections with gusset plate,rails, braces etc.complete, drilled for fixing steel sheeting or other coveringsetc. to be prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fittings (exclusive of steel sheeting or other coveringsrunning rails and guides) and hanging of Fe 290 Gde E-165, also fastening and fixing complete all as specified and directed.
M&L for mild steel framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including welding and bending angles as necessary, riveting, etc. confirming to Fe 290 Gde E-165, including dismantling of existing complete all as specified and directed.
Dismantling of plain or corrugated AC sheeting, any gauge, thickness, including ridge etc as in roof covering complete all as specified and directed.
S&F in repairs 4 to 6mm thick non asbestos fibre cement building boards fixed or laid on GI frame work comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centr/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspeneded from soofit at approx 900mm centre to centre with GI cleat and steel expansion fastenerswith and including ceiling section(not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips accross the intemediate channel at 457mm centre to centre fixed with hangers 6mm dia.GI(upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flate 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/vally roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick and 450 mm width of an ecofriendly colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L in repairs for false ceiling of 7 to 8 mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or coloured) fixed using T grid/Cross-T/Wall angle/level clip & suspenders / hangers 4.00 mm dia GI wire (upto 120mm length) adjusting level fixed to roof slabs/ trusses of standard galvanised sections in a grid size of 600x600mm, including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.
M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length, bent to shape required incl bending spirally cranking, hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified.
M&L for mild steel TMT bars 05 mm dia and over upto and including 10mm dia in stirrups, spacers,and binders with mild steel wire(annealled) not less than 0.9mm dia or securing with clips, all as specified.
M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in sub floor, for laying floor topping etc. complete all as specified and directed.
S&F 40 mm bore galvanised steel tubing, light grade, with all fittings, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with and including 02 Nos. MS clamp of size 25x4 mm, nuts, bolts and washers complete all as specified and directed.
Surface excavation, n exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and making the surface smooth and applying two coats of oil emulsion distemper complete all as specified and directed.
M&L for form work to sides of concrete footings, base of columns,raft & raft beams, sides and soffits, vertical surfaces etc, and similar work complete all as specified and directed.
Taking down copper /aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches , ceilling roses , holder , tube light , bulk head , pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be made as per conditions separately) and making good surfaces , wall, floors etc.)
M&L for Point wiring for one light point / fan point / bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed, FRLS , multistranded copper conductor cable (red, yellow & blue colour) in and including non metalic rigid PVC concealed conduit ISI marked, not less than 20mm dia, medium duty with all necessary fittings such as tee, elbow, socket including sunken steel boxes of suitable size with 3mm thick plastic laminated backelite sheet top for mounting switches sockets etc including FRLS PVC insulated unsheathed multistranded copper conductor cable of size 1.5sqmm (green colour) as continuous earth wire and connecting to earth dolly, and making good to distrubed surfaces of wall/floor to match to existing finishes etc complete all as specified and directed. Note: The unit rate quoted include the cost of cutting chases in surfaces for conduits and fixing of sunken boxes and making good the distrubed surfaces to match the existing surfaces.
All as per description of serial item No.119 here in before but for one 5 pin 5/6 amps socket outlet on same board.
M& L for Point wiring for one socket outlet 5 Amp 3/5 pin for independent board etc controlled by one switch with copper conductor cable FRLS type multistrand of size 1.5 Sqmm(red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour), in and including non metalic rigid PVC Conduit of appropriate size not less than 20mm dia,and with sunk cast iron for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified.
All as per description of serial item No. 121 here in before but with 4 Sqmm FRLS cable PVC insulated unsheathed multistrand for gyser sheet metal plug socket outlet/metal plug top including 4 Sqmm FRLS cable PVC insulated copper wire for earth continuity on independent board.
All as per description of serial item No.121 here in before but for one 15 Amp independant socket outlet point using 2.5 Sqmm FRLS PVC insulated unsheathed multi-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked) not less than 20mm dia,medium duty including sunken steel boxex of suitable size with 3mm thick plastic laminated bakelite sheet incl FRLS PVC insulated unsheathed multistranded copper conductor cable of size 2.5 Sqmm (green colour) earth wire connecting to earth dolly .
S&F Switch piano flush button single pole, one way 6 Amps, 240 volts polycarbonate body complete all as specified and directed.
S&F socket outlet multi purpose 2 & 3 pin, 6A, 230 Volts flush type complete all as specified and directed.
S&F socket outlet 2 in 1, 5 pin, 6 and 16 Amps , flush type, single pole, one way, 230Volts complete all as specified and directed.
S&F switch piano, flush type, single pole, one way, 16 Amps 230Volts complete all as specified and directed.
S&F ceiling rose 65 X 50 mm, 3 phase PVC / polycarbonate, isolated body complete all as specified and directed.
S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete complete all as specified and directed.
S&F LED Lamp of 9W, Base B22, BEE 3 Star holder base with polycarbonate body and aluminium heat sink warm white, complete all as specified and directed.
S&F stepped type electronic mini /delux fan regulator 100 watt rotary step all as specified and directed.
S&F LED tube light fittings (4 feet long), wall mounted 1x20 watt 6500K, Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed.
S&F LED light fitting, mirror type with high out put diffuser, 2 feet,10 watt, 220 volt, AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F in repairs LED Bulk Head luminaries, 10W complete with all accessories and including connector and connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete.
Note for srl item No 132 to 134 above:- 1. Driver shall be potted anti-vibration types. 2. LM-79 and LM-80 test report with 1 Lakh burning hours LED life from NABL lab shall be provided. 3. CRI (Colour Rendering Index) of fixture shall be > 70. 4. CCT (Colour Co-related Temperature of fixture shall be 5700K + 300 K. 5. System Lumen Efficacy shall be > 100 Lm/W. 6. 10 KV separate Surge Protection shall be provided as a part of fitting. 7. Lenses shall be Modular Type. 8. PCB used shall be MC PCB type. 9. CA No. shall be written on each fitting before installation. 10. The name of manufacturer to be embossed on the fitting.
11. The fittings shall have arrangement so that maintenance required, if any can be carried out from Top cover. 12. The defect liability period of LED lights shall be 05 years from the certified date of completion & the contractor shall replace/repair the defective fitting within 07 days after handing over for replacement. 13. A guarantee of 05 years shall be provided by contractor supported by OEM covering all parts of luminaire. Contractor shall deposit security on this account @ 5% of work done against these items otherwise the same shall be deducted from the dues payable to him in RAR/Final Bill.
Supply & Fixing of building security LED light luminaire 30 W, IP 66, IK-07, AC 230 volts,made up of pressure di cast iron housing complete making connection using PVC insulated and sheathed3 core multi stranded copper conductor cable of size 0.50 Sqmm from ceiling rose including suitabe size of bracket of light grade pipe for mounting of fitting along with clamps,nut bolts and washers all as specified and directed by Engr-In-Charge.
S&F SPN 8 ways sheet metal enclouser, factory made, DB double door 230V AC,50 HzAC 200 Amps rated bus bar complete all as specified and directed.
S&F sheet metal enclouser, single pole and neutral 240 volt, 20 to 32 Amps with two pin and earth plug and socket plug top complete with single pole MCB complete all as specified and directed.
S&F TPN Distribution board with provision for TPN as incommer 63 A 04 pole IP 54 ,06 way, 4+18 Modules (for incomming TPN & outgoing MCBs), with copper busbar for each phase, with Neutral bar, Earth bar and cable ties for cable managemet, fully insulated busbar & shrouded Neutral bars, with 63 Amps TPN, 16 KA, 4 pole, as incomer and SP MCB's of cap 16-32amps as outgoing complete all as specified and as directed. Note: Rate of TPNs and MCB,cutting,chasing,grouting in wall are included in above rate. "
S&F MCB single pole and neutral, 40 Amps, 240 volts, B-series complete all as specified and directed.
S&F MCB single pole 16 to 32 Amps, 240 volts, B-series complete all as specified and directed.
Supply and fixing in repair MCB tripple pole and neutral 63 Amps,16KA, 415 volts , C-series complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode, 600mmx600mmx6mm size, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electric plate No 3 connected to earth test point/MCB DBs all as specified and indicated complete with funnel, charcoal, dust, salt etc and GI protection pipe, medium grade 15mm bore and GI watering pipe 20mm bore light grade, 40mm thick precast RCC M-15 (nomial mix) cover reinforced with XPM weight not less than 4 Kg/Sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover, PCC M-15 (Nominal mix) pit, excavation and earth work in any type of soil and connected, complete all as specified & directed. Note:- 1. Earth lead & protection pipes upto & including 7.50 metre length is deemed to be included in the unit rate quoted by the contractor. 2. Earth filling should be free from stones, boulders, aggregate, gravels etc
S&F electric water storage heater (vertical type gysers) 25 Ltrs, 2.0 KW, BEE 5Star 230 volts AC single phase, including MS glass lined inner tank, glass coated heating element, high density PUF insulation,Anode rod protection, heavy duty fastner not less than 100 mm with suitable size of nut & washers grouted in wall with complete mason work for proper mounting of gyser, such as safty valve NRV, thermostat, plug top etc. as directed. Making inlet, outlet water connection and electric connection, testing on load for full satisfaction of Engineer in charge, complete all as specified and directed.
S&F wall mounted,15mm bore bib tap, fancy type, with flange, cast copper alloy fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed, marked lettered 'Hot' complete all as specified and directed.
M&L for cutting to existing GI fittings 25/40 mm dia for additional /altration, branch connection and inserting of Tee complete all as specified and directed.
S&F and testing of exhaust fans AC single phase rated voltage 230V, not more than50W, 1300RPM of size 300mm sweep, double ball bearing heavy duty motor, protactive bird guard is provided, steel body with louversincvluding connection to ceiling rose, complete all as specified and directed.
M&L for dry clean fine river sand as in sand cushioning to underground cable and under paver blocks, including punning down of sand layer complete all as specified and directed. Note :- Punned thickness shall only be measured and paid.
Supply & laying sub class B bricks old size, in trenches, laid dry, flat, over sand cushioning for protection of cable, with length of brick equal to width of protection complete all as specified and directed. Note:- Sand cushioning shall be measured and paid for separately.
Supply, laying, jointing & and testing of XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor cross sectional area 10 sqmm 2 core, complete all as specified and directed. Notes:- Excavation & earth work, sand cushioning, brick protection shall be measured and paid separately.
Taking down Ceiling fan, sealing cable end, dismantling blades and removing fan and blades and re fix in the same position after servicing including minor repairs by replacement of capacitor, safety pin, cap, nuts & bolts etc and making connection using 3 core, 0.50 sq mm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose to fan, including testing to ensure efficient functioning including application of one coat of synthetic enamel paint by spray painting & rewriting number complete all as specified and directed.
Supply laying & jointing XLPE insulated, armoured, heavy duty electric cable with aluminium conductor 1100volts grade, cross section area 16 sqmm 4 core complete all as specified and directed.
M/S TARA CHAND CONSTRUCTION CO. (BID ID -3115772)
yash paul gupta (BID ID -3117892)
M/S HIMANSHU BUILDERS (BID ID -3115230)
Bidder Name
yash paul gupta
M/S TARA CHAND CONSTRUCTION CO.
M/S NARESH KUMAR SHARMA
M/S HIMANSHU BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .