Construction of Bilgaon to Savrayadigar Road VR-70 Km.0/00 to 5/300 Tal.Dhadgaon Dist.Nandurbar

Amount

Providing and laying in situ / ready mix M-35 cement concrete of trap / granite / quartzite/ gniess metal for reinforced cement concrete block below the bearing including necessary scaffolding, plywood/steel formwork, compaction by vibrating, finishing in Cement Mortar 1:3 and curing complete (Excluding reinforcement) Using reversible drum type mixer/ concrete batch mix plant (pan mixer) . Over Abutment Cap (5th Lift)

Providing and laying in situ / ready mix M-35 cement concrete of trap / granite / quartzite/ gniess metal for reinforced cement concrete block below the bearing including necessary scaffolding, plywood/steel formwork, compaction by vibrating, finishing in Cement Mortar 1:3 and curing complete (Excluding reinforcement) Using reversible drum type mixer/ concrete batch mix plant (pan mixer) . Over Pier Cap (12th Lift)

Supplying, fitting and fixing in position true to line and level POT- PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel / fabricated structural steel, metal and elastomer elements to be as per Indian Road Congress: 83 part I and II respectively and other parts conforming to British Standard :5400, section 9.1 and 9.2 and clause 2006 of Ministry of Road Transport & Highway specifications as per drawing and approved technical specifications etc. complete.

Supply of all types of Structural steel conforming to Fe 410 B of Indian Standared 2062, Fabrication, assembling, erection / slewing/ end launching of Steel girders ( NOT requiring traffic block) upto 45.7 meter span on sub structure incl. provision of trolley refuges, incl. loading, unloading, lift and taxes complete, assembly of girders on drift/ bolts, field riveting/ welding, assembling of temporary support for side slewing, raising of girders to the bed block level, providing sliding arrangements (Material at site, fabrication at site, erection / etc only) PLATE GIRDER / Semi Through Girder

Launching of Prestressed concrete girders casted by any method approved by Engineer or steel girders and placing them to correct alignment and level over the bed block pedastal. The Prestressed concrete girder shall be precast at casting bed developed at site. The cost of the casting bed will be paid extra. The rate includes cost involved for various arrangements, suitable cranes, men and machinary, lifting, lowering etc.

Metalizing of steel work of girder with grit blasting as per IRS - B1-2011 following by one coat of etch primer (as per Indian Standared ;5666) one coat of Zinc Chrome primer (as per Indian Standared:104) and two coats of aluminium paint (as per Indian Standared :2339) with all labour, tools,plants and materials.

Providing and applying epoxy paint primer with middle coat and top coat to superstructure including scaffolding etc complete.

Providing and laying in situ M40 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for Prestressed Concrete work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled concrete batch mix plant / pan mixer with natural sand) i) Height up to 5 meter, normal rate.

Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 millimeter to be installed by the manufacturer / supplier to their authorized representative ensuring compliance to the manufacturers instruction for installation as per approved drawings and standard specifications etc. complete.

BITUMINOUS MACADAM:--Providing and laying bituminous macadam using crushed aggregate of Grading 1, premixed with bituminous binder, transported at site with Vehicle Traffic System, laid over a previously prepared surface , finished to the required grade ,level, alignment,and rolling to achieve the desired density for 80/100 millimeter compacted thickness with drum mix type hot mix plant with Supervisory Control and Data Acquisition having complying essential features of Hot mix plant as per Indian Road Congress-27 2009 specified conditions and attachments such as electronic load sensor based belt conveyers,automatic synchronization of bitumen and aggregate fedder,built in dust controller system and Programmable Logic Controller for Drum Mix plant ,Sensor paver,and Vibratory roller including prime/Tack coat etc. complete --Bitumen 3.30% of specified grade (Viscous Grade-30 bulk bitumen rates are considered to arrive at rates)

BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed aggregate of grading 1, premixed with bituminous binder @5.40% by weight of total mix and filler, transported at site with Vehicle Traffic System, laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 50 millimetre compacted thickness with drum mix plant with Supervisory Control and Data Acquisition, Sensor paver and Vibratory roller including prime/Tack coat etc. complete --Bitumen of specified grade with stone dust filler. (Viscous Grade-30 bulk bitumen rates are considered to arrive at rates)

Providing Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with Reinforced Cement Concrete M 30 Grade concrete with High Yielding Strength Deformed Steel reinforcement conforming to Indian Road Congress:21 and dowel bars 25 millimeter dia, 450 millimeter long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to Management of Social Transformation circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified etc. complete. Spec: MORT and H 2013 Cl 811 Page No 360

Providing, cutting, bending, hooking, tying and laying in position Thermo Mechanically Treated Ferous Material 500 steel bars for reinforcement for all Reinforced Cement Concrete works as per detailed drawings etc. complete.

Providing 100 millimetre diameter Galvanised Iron water spouts as per detailed drawings in Reinforced Cement Concrete slab and wearing surface / kerb etc. complete.

Providing and laying in situ / ready mix M20 Reinforced Cement Concrete of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( Vertical Shaft imapactor sand finely washed etc ) Reinforced Cement Concrete work of Box returns 4th lift

Providing and laying in situ / ready mix M20 Reinforced Cement Concrete of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( Vertical Shaft imapactor sand finely washed etc ) Reinforced Cement Concrete work of Box returns 5th lift

Providing and filling sand in foundation trenches / below Raft as per drawing and technical specifications etc. complete. (Coarse Sand and Gravel )

Providing and laying weep holes of 100 millimetre diameter Asbestos Cement/Poly Vinyl Chloride pipes as per drawing for abutment returns, return walls etc. Complete.

Providing and laying of filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of Ministry of Road Transport & Highway specifications to a thickness of not less than 600 millimetre with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition as per drawing and technical specifications etc. complete.

Providing and laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etc. complete.

Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material)

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed.

Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50metre and spreading or stacking as directed.

Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.

Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50 meter including all lifts, laying in layers of 20 centimeter to 30 centimeter thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density etc. complete. (Material obtained from departmental Land)

Providing earth work in embankment with approved materials obtained from other sources upto lead of 50meter including all lifts, laying in layers of 20centimeter to 30centimeter thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources)

Conveying materials obtained from road cutting including all lifts, laying in layers of 20centimeter to 30centimeter breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300meter to 500meter inclusive, from the site of excavation to the site of deposition as directed.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at Optimum moisture Content, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) millimeter Aggregate)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 millimeter) Aggregate)

Supplying hard murum/ kankar at the road site, including conveying and stacking complete.

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete

Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete.

Providing and constructing 75 millimetre thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 millimetre stone metal layers 100% crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ 2 Kilogram per square metre, spreading 12 millimetre size chips compacting with three wheel static roller having weight 8 to 10 Metric Tonne to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing Water Bound Macadam, surface. (Viscous Grade-30 bulk bitumen rates are considered to arrive at rates)

Open Graded Premix Surfacing- Providing and Laying OGC 20 millimeter thickness composed of 13.2 millimeter to 5.6 millimeter aggregates premixed with bituminous binder transported to site with Vehicle Traffic System , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with Supervisory Control and Data Acquisition, Paver and Vibratory roller ( Over Modified Penetration Macadam Surface) (Viscous Grade-30 bulk bitumen rates are considered to arrive at rates)

Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 Kilogram Square metre by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 Matric Ton etc. complete. (Viscous Grade-30 bulk bitumen rates are considered to arrive at rates)

Providing dry rubble stone pitching 23 centimetre (about 9 inches ) thick including all material, quarry spalls, labour etc. complete.

Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete.

Excavation for foundation in hard murum including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete.

Dewatering on Brake Horse Power basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 10.0 to 19.0 Brake Horse Power pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Dewatering on Brake Horse Power basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 Brake Horse Power pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Providing and laying in situ / ready mix controlled grade of M15 of trap /granite /quartzite /gneiss metal for Reinforced Cement Concrete works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand, excluding reinforcement)

Providing and laying in situ / ready mix / ready mix M10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand)

Providing and laying in situ / ready mix / ready mix M25 Reinforced Cement Concrete work with trap/ granite/ quartzite/ gneiss metal in well steining including shuttering, compacting by vibrating, finishing and curing etc. complete. (fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled concrete batch mix plant / pan mixer with natural /artifical sand, excluding reinforcement)

Prividing and fixing pressure relief pipes of 100 millimetre diametre of Poly Vinyl Chloride as per drawing for Reinforced Cement Concrete Raft, galaries returns, abutments, wing wall etc complete.

Providing and laying in situ / ready mix M25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete work in main/ cross girders, diaphrams etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (height up to 6 meter with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled concrete batch mix plant / pan mixer with Natural / Vertical Shaft imapactor standard Artificial Sand)

Providing and laying in situ / ready mix M25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (height up to 4 meter with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled concrete batch mix plant / pan mixer with Natural / Vertical Shaft Impactor standard Artificial Sand)

Providing and laying in situ / ready mix M20 Reinforced Cement Concrete of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled concrete batch mix plant / pan mixer with Natural / Vertical Shaft impactor standard Artificial Sand) For Kerb and Ballast Wall.

Providing railing of cast in situ Reinforced Cement Concrete posts with (M-20) cement concrete trap / granite / quartzite / gneiss metal size 150 millimeter x 150 millimeter x 1.240 millimeter and horizantal 3 nos. at distance 370 millimeter Center To Center and bottom bar 150 millimeter above kerb as per the detailed drawings (including cost of reinforcement) scaffolding,steel centering, plywood/steel formwork etc. complete. The Cement Morter 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering/formwork will not be allowed).

Providing rubble filling of trap/ granite/ quartzite gneiss stones for foundations including hand packing filling gravel / sand in the voids etc. complete.

Providing and fixing 90 centimetre X 60 centimetre Marble plate engraving 10 centimetre height letter, figures including painting the lefters / figures with approved colour and shade complete.

Providing flexible apron of 100 cetimeter thick comprising of loose stone boulders weighing not less than 40 kilogram beyond curtain wall etc. complete.

Providing and laying in situ / ready mix M20 Reinforced Cement Concrete of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled concrete batch mix plant / pan mixer with Natural / Vertical Shaft impactor standard Artificial Sand) For Kerb and Ballast Wall.

Supply of all types of Structural steel conforming to Fe 410 B of Indian Standared 2062, Fabrication, assembling, erection / slewing/ end launching of Steel girders ( NOT requiring traffic block) upto 45.7 meter span on sub structure incl. provision of trolley refuges, incl. loading, unloading, lift and taxes complete, assembly of girders on drift/ bolts, field riveting/ welding, assembling of temporary support for side slewing, raising of girders to the bed block level, providing sliding arrangements (Material at site, fabrication at site, erection / launching etc only) PLATE GIRDER / Semi Through Girder

Metalizing of steel work of girder with grit blasting as per IRS - B1-2011 following by one coat of etch primer (as per Indian Standared ;5666) one coat of Zinc Chrome primer (as per Indian Standared:104) and two coats of aluminium paint (as per Indian Standared :2339) with all labour, tools,plants and materials.

Providing and applying epoxy paint primer with middle coat and top coat to superstructure including scaffolding etc complete.

Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 millimeter to be installed by the manufacturer / supplier to their authorized representative ensuring compliance to the manufacturers instruction for installation as per approved drawings and standard specifications etc. complete.

BITUMINOUS CONCRETE:- Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50 millimetre compacted thickness with specified grade of Bitumen,Including prime / tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with Supervisory Control and Data Acquisition, Sensor Paver, Vibratory roller with Stone Dust filler. (Viscous Grade-30 bulk bitumen rates are considered to arrive at rates)

Providing and laying in situ / ready mix / ready mix M10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand)

Providing and laying in situ / ready mix M20 Reinforced Cement Concrete of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled concrete batch mix plant / pan mixer with Natural / Vertical Shaft impactor standard Artificial Sand) For Kerb and Ballast Wall.

Providing and laying in situ / ready mix M20 Reinforced Cement Concrete of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( Vertical Shaft imapactor sand finely washed etc ) Reinforced Cement Concrete work of Box returns

Providing steel anchor dowel bars of 32 millimeter diameter and 4 meter length at the base of the well including drilling holes of 60 millimeter diameter up to 2.5 meter depth in rock, placing the dowels in position and effectively grouting the holes with Cement Mortar 1:1 etc. complete.

Open Graded Premix Surfacing- Providing and Laying OGC 20 millimeter thickness composed of 13.2 millimeter to 5.6 millimeter aggregates premixed with bituminous binder transported to site with Vehicle Traffic System , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but including prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with Supervisory Control and Data Acquisition, Paver and Vibratory roller ( Over Modified Penetration Macadam Surface) (Viscous Grade-30 bulk bitumen rates are considered to arrive at rates)

Excavation for foundation in hard murum and boulders including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete.

Excavation for foundation in soft rock including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete.

Excavation for foundation in hard rock by blasting including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete.

Providing and laying in situ / ready mix / ready mix M10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand)

Providing cast in situ / ready mix M20 grade cement concrete for head walls of Cross Drinage work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with Supervisory Control and Data Acquisition with Natural / Vertical Shaft Impactor standard Artificial Sand, cement 4.05 bags/cubic metre)

Providing and laying in situ / ready mix / ready mix M10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand)

FORCON INFRA PVT. LTD.

M/s. A.B.Wagh