Reconstruction work of the road from Naugawan to village Jatowala.

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5

Construction of Granular sub-base (CTSB) by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and with 2 percent cement compacting with vibratory roller to achieve the desired density, complete as per clause 401

Providing, laying, spreading material (CTB) on prepared sub base adding cement @ 4% by weight to the spread material manually mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strenght and to form a layer of base.

Providing & applying tack coat with V.G.-10 using bitumen distributor at the rate of 0.35 kg per sqm on the prepared granular surface treated with primer cleaned with hydroulic broom as per Technical Specification Clause 503.

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen VG-10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades to be followed by seal coat as per Latest Specification.

Providing and laying seal coat by manual means with V.G.-10 Grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Latest Specification.

Brick Lining on edge of both side of road (Ch-04 Item No. 4)

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3

Providing Plain Concrete (1:3:6) in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Excluding GST

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications Clause no.600, 1200 & 1203

12 mm cement plaster: (1 cement : 4 fine sand) (DSR No. 13.1.1)

Plain/--- Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. (M-20)

Providing and laying of 600mm N.P. 3 Hume pipe

Providing and laying of 1000mm N.P. 3 Hume pipe

Supply and fixing of Km. Stone, Hectometer Stone, etc.

Providing and laying Sign Board

Sand filling in below concrete including supply of necessary quantity of sand from a distance not exceeding 8 km. from the site of work & including watering,dressing etc. Rate includes cost of all materials, labour and T&P etc. required for proper completion of the work. AS per (Ch-1 item No. 7(a)

Reinforced Cement Concrete (Grade M25) Using Batching Plant, transit mixer & concrete pump and curing complete, including supply of all materials, labour and T&P etc. required for proper completion of the work as per direction of Engineer Incharges.

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications

Providing and laying of boulder apron laid in wire crates made with 4mm dia GI wire conforming to IS: 280 & IS:4826 in 100mm x 100mm mesh (weaved diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 40 kg each.

Stone masonry work in cement mortar 1:3 in foundation complete as drawing and Technical Specification

Please Enable Macros to View BoQ information