Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.4 Craccepted-aoc | ₹1.4 Cr | accepted-aoc |
Tender Value
₹1.3 Cr
EMD Value
₹2.0 L
Closing Date
24 Dec 2025, 9:30 pmClosed
Minor Irrigation Department
ALWYN AGERA
Repair works to 61 vented dams in Kapu, Udupi, Kundapura and Byndoor taluks of Udupi district
MI/2025-26/DA/WORK_INDENT8930/CALL-2
MI/2025-26/DA/WORK_INDENT8930/CALL-2
Open
Dam and Allied works
Two Tender Document System(Two Cover)
Minor Irrigation Division Mangalore
7 documents required · 7 mandatory
Contractor Registration Certificate
3.2 (c) Executed in any one financial year the minimum quantities of work, Supply of Wooden Planks : 133.00 Cum, Supply of FRP Needle gates: 27.00 Sqm
3.2 (b)Satisfactory completion (at least 90% of the contract value) as a prime contractor at least one similar work such as Repair/ Annual Maintenance of vented dams works of value not less than Rs.67.42 Lakhs.
3.2 (a)To qualify for award of this contract each tenderer in his name should have in the last five years period. (a) achieved in at least 2 financial years a minimum financial turn over ( in all classes of civil engineering construction works only) of Rupees. 269.69 lakhs (usually not less than two time the estimated annual payments under this contract)
3.3(b)liquid assets and /or availability of credit facilities of not less than Rs.41.93 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. for works costing Above Rs.100.00 lakhs).
Details of works already Tendered for
Details of Ongoing Works
Availability of Project Engineer And Organization Chart
Affidavit
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
₹3,380
₹2.0 L
24 Dec 2025
16 Dec 2025
26 Dec 2025
23 Dec 2025
19 Dec 2025
Repair works to 61 vented dams in Kapu, Udupi, Kundapura and Byndoor taluks of Udupi district
Supplying hard wood ( Kiral-bogi ) planks of specified length and thickness for vents of vented dam including cost of all material,machinery, labour & all necessary works as directed and complete as p...
Design, fabrication, supply, erection, testing and commissioning of adequate capacity screw type hoist consisting of supporting structure, platfom, railing, ladder with all accessories for operating c...
Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift gate ( with top seal ) consisting of skin plate, siffeners, horizontal and vertical girders, wheels, ...
Cleaning gates / hoists / embedded parts for re-painting by removing rust, old paint, grease by using wire brush, scrubber, rust remover including cost of all materials, labour, machinery, scaffolding...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...
Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...
Supplying and fixing rubber seals of approved quality including cost of all materials, labour, removing existing worn out / damaged bulb type rubber seals from gates, cleaning surface, making holes in...
Supplying and fixing rubber seals of approved quality including cost of all materials, labour, removing existing worn out / damaged bulb type rubber seals from gates, cleaning surface, making holes in...
Providing and applying grease of approved quality to gate and hoist components requiring greasing as part of the annual maintenance using grease gun wherever necessary including cost of all materials,...
Cutting grooves, pockets, openings in concrete to specified size carefully without damaging the adjoining area including disposal of debris, cleaning the area, etc. (For Power House and Allied works)....
Supply and fixing of FRP “C” section frame of size 100mm and wall thickness of 8mm (1mm) and Rib thickness of 12mm smooth finish with marine grade gel coat, with side projections at every 1 meter ...
Supplying and fixing FRP Needle gate made out of concealed GI tubes of suitable size & thickness. Zinc coating of not less than 360GSM, I.S make hot rolled from any reputed pipe manufacturing company....
Supplying and fixing FRP Needle gate made out of concealed GI tubes of suitable size & thickness. Zinc coating of not less than 360GSM, I.S make hot rolled from any reputed pipe manufacturing company....
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Royalty new.pdf
Others - Royalty new • 0.06 MB
E payment new.doc
Others - E payment new • 0.22 MB
8930_kw-4_bid_document.doc
Tender Document • 2.05 MB
Work done.xls
Others - Work done • 0.05 MB
General specifications new.pdf
Instructions to Tenderers • 0.57 MB
8930_programme_of_work.xlsx
Others - Program of work • 0.22 MB
8930_formats_1to_6.xlsx
Others - Formats • 0.02 MB
Labour.docx
Others - Labour • 0.98 MB
New LOC format.pdf
Others - New LOC format • 0.35 MB
Format for 3 2b.xls
Others - Format for 3 2b • 0.01 MB
8930_bar_chart.xls
Others - Bar Chart • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .