SPECIAL REPAIR/ REPLACEMENT OF OLD VINTAGE GUTTER PIPE LINES AT OLD ORS LINE,CERTAIN REVENUE AND MINOR WORKS UNDER AGE B/R (SOUTH) NO I AND II, AGE E/M (SOUTH) OF GE (SOUTH) SECUNDERABAD

Amount

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in hard and dense soil.

Removing excavated soil to a distance n exc 50m and depositing where directed at a leval n exc 1.5 m above the starting point.

M&L for Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface

Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth for foundation or manholes etc, and area n.exc 10.00 Sq.m on plan and getting out in hard/ dense soil. complete all as specified and directed.

Excavation in trenches n. exc 1.5 m wide and .exc 1.5 m in depth and n. exc 3 M deep for foundation or manholes etc, and area n.exc 10.00 Sq.m on plan and getting out in hard/ dense soil. complete all as specified and directed.

Returning, filling in with approved soil obtained from excavation including spreading leveling, satering and well ramming in layers exc 25 cm thick. complete all as specified and directed.

Excavation in post holes or (similar holes) each n exc 0.50 Cum in soft/loose soil, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M & L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4) Note: reinforcement will be measured and paid seperatel

Supply only intergral water proofing compound

M & L PCC 1:2;4 type B1 (20mm graded stone aggregate) as in copings/ bed plates, kneeles apex stone, channel and the like including weathering, slightly roundd chamfered etc including necessary formwork complete all as specified and directed by Egnineer-in-Charge.

M&L for cement concrete in foundation filling and mass concrete type C2 1:4:8 (40mm graded aggregate)

M&L PCC (1:2:4) type-B0 using (12.5 mm graded stone aggregate) for benching of channels in manholes etc complete.

M & L for precast cement concrete louvers and jallies 40mm thick type B-0 1:2:4 (12.5mm graded aggregate) set cement mortar 1:4 complete all as specified and directed.

M&L Cement concrete type B2 1:2:4 using (40 mm graded stone aggregate) in posts (including caps and bases) or foundations, filling and mass concrete complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girthcomplete all as specified and directed.

M & L brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4.complete all as specified and directed.

M/L brick work with sub class B bricks built in CM 1.6 straight or curved exceeding 6m mean redius all as specified

M/L brick work with sub class B bricks built in CM 1.6 straight or curved exceeding 6m mean redius but except bricks which shall be obtained from demolition here-in-before including removing the mortar & cleaning complete all as specified & directed

M&L for cutting holes in to or through brick walls of superficial area exc 400 sq.cm but n,exc0.10 sq.m built in cement mortar and making good in cement mortar 1:3 or cement concrete type B-1 as required complete all as specified and directed.

M & L plain fillets square, rectangular in section clean sawn secured with nails or brads 2nd class soft wood sectional area exc 3 sq cm but n.exc 6 Sq cm each.complete all as specified and directed

M & L plain fillets square, rectangular in section clean sawn secured with nails or brads 2nd class soft wood sectional area exc 13 sq cm but n.exc 25 Sq cm each.complete all as specified and directed

Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm Each incl iron mangery complete.

Taking down old shutters of any description exc. 1sq.m and not exc. 2sq.m each, easing, adjusting and refixing in same opening complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.complete all as specified and directed

S& F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

S & F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including beeing all as specified & directed by engineer - in - charge

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm

S&F in repairs 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screws complete all as specified.

S & F 100 mm long mild steel, barrel tower bolts stove enamelled black, with bright bolt complete.

S&F 100mm size, stainless steel butt hinges complete all as specified and directed.

S & F 150mm size aluminium anodised handles complete all as specified

S&F 100mm size extruded aluminium alloy handles, fabricated type complete all as specified

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.complete all as specified

S & F continuous (Piano) hinges MS bright finish or elecro galvanised 40mm width of flape.complete all as specified

S & F 35 to 40 dia cup board knobs fixed with nut, screws and washers of brass polished.complete all as specified

S & F brass locks, 2 levers drawer grade-I size 50mm complete all as specified

S & F bombay sliding for drawer purposes complete all as specified and as directed.

M & L 100 mm Butt hings, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S & F 125mm long Aluminium handles, cast type, anodised complete all as specified and directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruted section and fixed complete all as specified and directed.

M&L for providing frame work for false ceiling with anodised aluminium snap grid frame work of size of grid 605 x 605 mm with aluminium main tee size 25 x25 x1.60mm thick and, cross T section of size 25 x 25 x 1.60mm thick and wall angle of size 25x25x2mm thick fixed to roof with rawl plugs/GI wire suspenders complete all as specified and directed.

S/F MS TMT bars 10mm dia and over for reinforcement etc, cut to length, bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with mild steel wire(annealed) not less than 0.9mm dia complete all as specified & directed.

S/F MS TMT 6 to 8 mm dia for reinforcement etc, cut to length, bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with mild steel wire(annealed) not less than 0.9mm dia complete all as specified & directed

S&F Rolled section as in main cross beams, hips and jack rafters, purlins where connected to common rafters and running rails and fuides for sliding door, fixed with angle cleats or other connecting plates confirming to Fe-410-0 or Fe-310-0

S & F Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 410 - O or Fe 310 - O complete all as specified and directed.

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 290(Gde E-165), with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and directed.

S&F mild steel as in post in fencing post/struts including cutting top to shapes, drinlings holes notching for wires etc. Fe - 290. Gde E-165 complete all as specified & directed.

Supply chain link fencing of 3.25mm dia galvanized steel wire 100mmx100mm mesh as in chain link fencing including provision of binding wires, 10mm bar on fencing, welding, etc, and laid/fixed in position complete all as specified, Note:- Only nibs, clamps, nuts & bolts, straining bolts, FI strap shall be measured and paid for separately under respectively item of Schedule `A'.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

M&L 5 to 10mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long

S & F Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes unched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc a required

S&Fpre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

S & F 12mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screwed and beading complete all as specified and directed.

S & F 18/19mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screwed and beading complete all as specified and directed.

M & L 4 mm thick Non Asbestos Cement Plain building boards, fixed to timber/ Aluminium frame work with screws in ceilings and preparing surface, applying two coats of OBD over a coat of primer. complete all as sepcified and directed by Engr-In-Charge.

M&L perforated particle board/tiles 12 mm thick for insulation and accoustic purposes, 60 x 60cm in size fixed with nails to timber frame work or with staples on snap grid and preparing surface, applying two coats of OBD over a coat of primer. complete all as sepcified and directed by Engr-In-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing). and removing serviceable tiles to store & rubbish the premises complete all as specified

M&L for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 as specified and directed

M&L for coloured non skid ceramic joint free tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M & L for Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding in layer of CM 1:6 for laying floor finishes complete all as specified and directed.

M & L glazed ceramic coloured tiles in vertical surface 300x200mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete in position laid on over 10mm thick screed in CM 1:3 on wall, complete all as directed and as specified by Engr-in-charge.

M & L coloured ceramic tiles 7-8mm thick area of each tile exc 0.11 Sqm n.exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with over screed bed of 15mm thick in CM 1:6 and PCC 25mm thick cement concrete type B-1 1:2:4 (12.5mm graded aggregate) coomplete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and directed by Engr-in-Charge.

Rounding to edges of stone slabs one edge, such as steps, cooking plateform, and other similar situations complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone stone aggregate) finished fair & even as in Sub base flooring complete all as specified & directed.

M & L 100mm thick PCC 1:2:4 type B2 (40mm graded stone aggregate) concrete surfaces, surface finished even and smooth without using extra cement.complete all as specified & directed.

M&L for 150 mm thick plain cement concrete in (1:2:4) type B2 using 40 mm graded stone aggregate as in water tank staging finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for 175mm thick plain cement concrete 1:2:4 type B1( using 20mm graded stone aggregate) as in floor, including spike rolling to surfaces whilst the concrete is green complete all as specified and as directed by Engr-in-charge.

M & L Non skid ceramic tiles 7 to 8mm thick (square/rectangluar) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6. complete all as specified and directed.

M & L Non skid ceramic coloured tiles (300 x 300 mm) x 7 mm thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. complete all as specified and directed.

M&L glazed coloured ceramic tiles (200x300x7mm) thick in verticle surfaces etc, set and jointed approved colour to match and as directed.

M&L for PCC type D2 1:4:8 (40mm graded stone aggregate) 100mm thick as in sub base complete all as specified and directed.

M&L for 75mm thick PCC type C2 1:3:6 (40mm graded stone aggregated) as in path/plinth protection etc laid in pannels including finished the surface smooth and even without using extra cement. complete all as specified and directed.

Taking down cement plaster/terrazzo finish on brick/RCC/stone wallsof any description including racking out joints hacking for keys scrubbing down with water etc, complete all as specified and as directed.

M & L for rendering 15mm thick on concrete or fairfaces of brick work in CM 1:4, finished even and smooth without using extra cement but mixing WPC complete,all as directed and as specified (Note:- WPC measured and paid separately).

M &L granite 20mm thick (of any type) work table robed & polished in steps, jambs, pillar, widow cills, cooking platforms and like over 15mm thick screed bed or bedding in layer of CM 1;4 for laying floor finishes incl pointing in white cement 1;2 using marble dust with admixture of pigment to match the shade of granite, and half mouldd at one side complete all as directed and as specified by Egnr-in-Charge.

Screed bed or bedding layer of cement mortor 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

Rendering 10mm thick on brick/stone walls in CM 1:3 as backing coat of tiles. complete all as specified and directed.

M & L for complete removal of existing treatment and applying two coat of distemper oil emulsion on walls over a coat of primer over a coat of birla wall care putty as required as for finishing of rough surfaces complete all as directed and as specified.

M&L for one coat OBD & wall putty on old surface of walls including removal of existing finish, scrapping and making good all as specified and directed

M&L for two coats of colour wash over a coat of white wash on walls including preparation of New surfaces of walls.complete all as specified and directed

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash.complete all as specified and directed.

M&L for sheet glass 3mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in Each pane.

M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.complete all as specified and directed.

S&F for waste fittings 32mm dia , brass, CP for glazed ware sinks, basins, etc with long screwed shanks, wast pipe and fly nuts flange end bedded in red lead cement and other end fixed in repair.

S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete.

S&F in repairs PVC cabinet with door fitted with looking mirror size 422mm x 622mm(Make: Prayag or its equivalent ) all as directed by Engr-in-charge.

S&F in repairs10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve, float and handle flush pipe complete all as specified and directed .

S&F in repairs PVC (SWR) Floor trap 125/110 mm setting and jointing with solvent cement

S&F in repair 15mm dia C P pillar tap cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe

S & F in repair stop valves cast copper alloy chromium plated with long shank (concealed), screwed both ends for iron pipe 15mm bore complete all as specified and directed

S & F bib taps cast copper alloy with crutch or butter fly handle screwed for iron pipe of dia 15mm fixed in repairs.complete all as specified and directed

S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical vertical with closed top) hoisted and fixed in position all as specified in SSR part I inclding PTMT ballvalve high pressure of 20mm dia complete all as specified and directed

S&F PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and dhgh denscity plastic ball screwed for iron pipes and fixed to iron pipes.complete all as specified and directed

S&F GI tubing of 15mm bore medium grade with all fittings completely fixed to walls or laid in floors etc. including taking up or down.

S&F GI tubing of 20mm bore medium grade with all fittings completely fixed to walls or laid in floors etc. including taking up or down.

S&F 110 mm dia PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall.

S&F 110 mm dia PVC (SWR) bends any redius with access door.

S&F 110 mm dia PVC (SWR) branch piece, (singal T) equal or unequal with access door.

S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement in repair complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall.

S&F 75 mm dia PVC (SWR) bends any redius with access door.

S&F 75 mm dia PVC (SWR) branch piece, (singal T) equal or unequal with access door.

S & F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F stainless steel Kitchen plate rack of 28 gauge of size 34"x35"x9" (make : Hindustan or equivalent)

S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), Colour 'P' or 'S' type, inc. 10 litres, PVC flushing cistern, Low level, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottem, & cover & M S CP or aluminium hinging device, complete.

Supply and fixed in repair CP 15mm bore dia health faucet with CP flexible 1.5 mtr tube complete in all respect as specified and directed by Engr-in-Charge. Make:- Jaquar/Prayag or equivalent

S & F in repair CP 15mm bore dia 2 Way Bib Cock with Wall Flange complete in all respect as specified and directed by Engr-in-Charge. Make:Jaquar Code :OPL-15041 or equivalent

S & F in repairs 15mm dia chromium plated fancy type Angle stop valve screwed for iron pipe and fixed complete all as specified.

S&F in repair brass chromium plated swivel shower rose 125mm dia complete all as specified and as directed.

S & F brass CP mixer for mixing Hot and Colder water scerewed down for iron pipe and fixed for 15mm bore fixed in repairs

S & F 110mm aid PVC (SWR) WC connector with lip ring complete all as specified and as directed.

S & F 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S & F 110mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S & F in repair bib tap 15mm bore, fancy type, chromium plated, cast copper alloywith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs, 15mm bore, stop valves, cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe.

S&F 600 mm long PVC connections, 15 mm dia with PTMT nuts, complete all as specified and as directed.

S & F in repairs vitreous china wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends for brackets, fitting with pillar tap 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or with out letter 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and waste fittings 32mm includkng waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S & F in repairs vitreous china wash down water closet pan (pedastal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover.

S&F EWC hind ware wall hanging type with plastic sseat cover all as specified and directed of size (H x W x P) 36.5 x 37 x 55cms with ‘P’ trap distance 22.5 cm complete all as specified and directed. Make: Cera Cat No 92051 (ESSENCE) or equivalent.

S&F in repair vitreous china table top wash hand basin size 420 x 420 x 135mm including CP waste coupling (make : Jaquar cat part No ARS-WHT- 39901) or equivalent. complete all as specified and directed.

Supply only brass chromium plated central hole basin mixer round spout with popup waste assembly with 10mm dia, 450mm long braided hoses complete all as specified and directed. Make Jaquar (Cat No- CQT-23169B) or equivalent.

S&F in repairs brass chromium plated hand shower 100mm round shape multi flow (ABS body chrome plated with grey face plate) with Rubit cleaning system complete all as specified and directed. Make : Jaquar (Cat No-HSH-1939) or equivalent.

S&F CP angle stop cock with wall flange copper alloy, fancy type, bore 15mm fixed in repairs. (Make jaquar cat part No FON-40053 or equivalent) complete all as specified and directed.

S&F CP two way bib taps with wall flange dia 15mm, fancy type fixed in repairs. (Make jaquar cat part No LYR-38041) complete all as specified and directed

S&F for CP health faucet fixed in repair (Make jaquar) cat part No ALD-565 or equivalent complete all as specified and directed

S&F CP towel rack 600 mm long with lower hangers fancy type fixed in repairs. (Make jaquar) cat part No CAN-1181N or equivalent complete all specified and directed

S&F glass shelf 600 mm long fancy type chromium plated (Make Jaquar Cat Part No A CN - 1171N or equivalent. ) complete all as specified and directed

S&F soap dispenser with metallic bottle long fancy typoe chromium plated (Make jaquar cat part No A CN-1137N or equivalent. ) complete all as specified and directed

S&F tumbler holder fancy type chromium plated (Make jaquar cat part No AQN-7741or equivalent. ) complete all as specified and directed

S&F corner glass shelf (with bracket) fancy type chromium plated (Make jaquar cat part No CAN-1173 or equivalent. ) complete all as specified and directed

S&F CP towel ring round with round flange (Make jaquar cat part No CAN-1121N or equivalent) complete all as specified and directed

S&F CP toilet roll holder with flap fancy type. (Make jaquar cat pat No CAN 1153N or equivalent. ) complete all as specified and directed.

S&F grating square 150mm size of PTMT (minimum weight 100gms) complete all as specified and directed.

M& L taking up or down steel tubing15mm dia and connections complete all as specified and directed

M& L taking up or down steel tubing 20mm dia and connections complete all as specified and directed

Refixing old serviceable steel tubing 15mm dia and connections in new or old position (Walls, ceiling, floors etc) complete all as specified and directed

Refixing old serviceable steel tubing 20mm dia and connections in new or old position (Walls, ceiling, floors etc) complete all as specified and directed

Disconnecting from water supply network and dismantling of existing rotational moulded polyethylene water storage tanks of capacity 500 litres capacity complete all as specified and directed.

S & F 75mm dia, PVC (SWR) floor trap, plain with grating and jointing to waste pipe with solvent cement and fixed in PCC 1:2;4, type B1, complete all as specified and as directed.

S & F in repairs vitreous china wash basin, colour oval type fixed with granite including cutting for and pinning in ends for brackets, fitting with pillar tap 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or with out letter 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and waste fittings 32mm includkng waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Dismantling water tanks exc 500 Ltrs but n exc 1000 Ltrs capacity complete all as specified and directed.

S&F in repairs Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore and complete all as specified and directed.

M & L Concrete bed to drain pipes including packing under, and hauching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 100mm dia pipe complete all as specified and directed.

M & L Concrete bed to drain pipes including packing under, and hauching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 150mm dia pipe complete all as specified and directed.

M & L Concrete bed to drain pipes including packing under, and hauching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 200mm dia pipe

M & L concrete bed to drain pipes including packing under, and completely surrounding of pipes after they are laid and tested 300mm long complete all as specified and directed.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 150mm dia pipe

M & L for SWG drain pipe grade 'A' of 100 mm internal dia laid in trenches and jointed in cement mortar 1:1 all as specified

M & L for SWG drain pipe grade 'A' of 150 mm internal dia laid in trenches and jointed in cement mortar 1:1 all as specified

M & L for SWG drain pipe grade 'A' of 200 mm internal dia laid in trenches and jointed in cement mortar 1:1 all as specified

S & F reinforced concrete pipes class NP3 laid and jointed complete with roller of 300mm dia.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100mm dia SWG pipe

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm dia SWG pipe

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 200mm dia SWG pipe

All as per item No 159 above but for removing existing branch drain, making good to walling and rendering, cutting out branch chromel and making good benchings for 150mm dia SWG pipe

All as per item No 159 above but for removing existing branch drain, making good to walling and rendering, cutting out branch chromel and making good benchings for 200mm dia SWG pipe

Mechanically pumping out sewage water from Septic tanks/sump well depth up to 3.0M where requried and as directed with taking precautionary measuerer including tools &b plants as required and removing to place out side MD land from the site complete ( working in foul condition) all as specified and directed.

Cleaning and de-sludging of existing septic tanks/ deep manholes up to 3 metre deep including taking out sludge in any form alongwith all other foreign materials by mechanical equipment or manually or by way of other suitable means including removal of sludge and other foreign materials out side the MD land by any means complete (working in foul condition) all as specified and directed

Cleaning and de-sludging of existing septic tanks/ deep manholes 3 to 6 metre deep including taking out sludge in any form alongwith all other foreign materials by mechanical equipment or manually or by way of other suitable means including removal of sludge and other foreign materials out side the MD land by any means complete (working in foul condition) all as specified and directed

Removal of filter media including sludge from filter bed/soak well as deposited and barried in ground including excavation as required except re use material in foul position from filter bed etc any depth or width all as specified and getting out.

Supply and loose filling with broken stone aggregate of gauge 40 to 80mm as filter media in filter beds, soak pits etc all as specified and directed.

Supply and loose filling with broken stone aggregate of 20 mm gauge as filter media in filter beds, soak pits etc all as specified and directed.

Cleaning of shrubs/ bushes arround the septic tank, filter bed, manholes and along the sewage line etc all as directed by the Engr-in-Charge.

S&F PVC (SWR) bends 110mm dia.

S & F 75 mm dia PVC (SWR) bends, for any radius.

S&F PVC(SWR) juntion double (Single T) equal or unequal 110mm dia

S&F PVC (SWR) Junction double (double T) equal or unequal, 110mm dia with access door.

S&F PVC (SWR) vent cowl 75mm dia complete all as specified and directed.

S&F for PVC (SWR) gully trap of 125/110 mm dia set and jointing with solvent cement complete all as specified and directed.

S&F in repairs of vitreous china squatting pan ' Orrisa pattern' size 580 x 440 mm white with integral foot rest including replacement of 'P' or 'S' trap lime concrete bedding and making good floors complete all as specified and directed.

Supply and fix (in repair) vitreous china, wash hand basin, white size 550 x 400 mm including brackets, chromium plated waste coupling & PVC waste pipe of 32 mm dia CP pillar tap complete all as specified & directed

S&F cast iron branch piece single 100mm dia (equal or unequal), ordinary or inverted or with parellel branches complete all as specified & directed.

S & F 110mm PVC soil waste, and vent pipe in any length with rubber ring joint laid in floors or trenches fixed to wall all as directed by Engineer-in-charge

S & F 75mm PVC soil waste, and vent pipe in any length with rubber ring joint laid in floors or trenches fixed to wall all as directed by Engineer-in-charge

S & F in repair bib tap 15mm bore, fancy type, chromium plated, cast copper alloywith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F vitreous china bowl, white, flat back size of 465x355x265mm, with grating & union for discharge pipe, complete inc. providing & fixing plugs, bedding urinal against wall in CM 1:2, inc. 60mm long brass screws, poijting around urinal back in cement, complete.

S & F water closet (squatting pan) complete including provision of lime concrete bedding 'Orissa' pattern size 580 x 440mm white, integral foot rests including flushing cistern 10 ltrs and flush pipe, PVC connection of size 450mm complete all as specified and as directed by Egnr-in-Charge.

S & F 75mm dia, PVC (SWR) gully trap, plain with grating and jointing to waste pipe with solvent cement and fixed in PCC 1:2;4, type B1, complete all as specified and as directed.

S & F towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms)

M &L soap dish, vitreous china white, approximate size 160x160x90mm.

S & F 500 ltrs rotational moulded polythylene water storage tanks, cylindrical vertical with closet top hoisted and fixed in position all as specified in SSR Part-I including 20mm dia PVC high pressure float valve complete

M&L for forming construction (Dummy) joints 50 mm deep x 10mm wide filled with sealing compound, Grade 'A'.

Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and asdirected.

Demolition of brick work or stone boulders masonry built in Cement mortar (or) cement lime mortor including all quions, arches, pillars etc.

Dismantling of cast iron drain pipe 100 mm dia from floor/walls etc and taking out oftrenches/floors.

Dismantling of cast iron drain pipe 75mm dia from floor/walls etc and taking out oftrenches/floors.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) setin cement mortar 75mm dia.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Demolition and breaking for 100mm dia drain pipes (salt glazed stone ware/ AC / PVC/ CI or reinforced concrete) set in cement mortar including concert bedding and hanching complete all as specified and directed .

Demolition and breaking for 150mm dia drain pipes (salt glaxed wara AC or reinforced concrete) set in cement mortar including concert bedding and hanching complete all as specified and directed .

Demolition and breaking for 200mm dia drain pipes (salt glaxed wara AC or reinforced concrete) set in cement mortar including concert bedding and hanching complete all as specified and directed .

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for

M & L for construction of 200 users septic tank in hard/dense soil, foundation in PCC 1;2;4 brick work in CM 1:4 RCC cover slab in M-25 including RCC pre cast manhole cover with angle iron frame vent saft and sludge chamber etc complete all as specified and directed.. (TD Drg No 22 Sht No,1/1)

M & L for construction of soakage well excavation in hard/dense soil foundation in PCC (1:3:6), fly ash bricks masonry in CM 1:4 with honey coiming and PCC bend, including intersepting chamber, RCC cover slab in M-25 and filling with brick bats complete of size =3.M dia and 4.5M deep. complete all as specified and directed. (TD Drg No. 1136)

Material and labour for point wiring complete with 1.5 Sqmm PVC insulated single core multistranded copper conductor 1100 V grade drawn through in PVC conduit on surface/concealed including 1.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly to One Exhaust Fan point controlled by one 5 Amps one way switch complete all as directed by Engr-in-charge

S & F Switch Piano flush type single pole one way 5 Amp ,230 V.

S&F ceiling rose two to three terminal surface backallite type AC 50Hz 230 volts complete

Supply & fix Exhaust fan metal body with louvers of 225 mm sweep and connecting up with PVC insulated copper conductor multistranded cable of suitable size and specification as provided by the manufacturer/company from ceiling rose to connector complete all as specified and as directed by Engr-in-Charge.

Drilling the wall to make a hole of suitable size for mounting of 225 mm dia exhaust fan and making good distributed surface matching with existing colour including grouting of nuts and bolts all as specified and directed by engineer-in-charge.

SAI RUPA CONSTRUCTIONS

BEEGEE DESIGN SYSTEMS