INCREASING CAPACITY OF TRANSFORMER AND OTHER WORK IN BUSINESS PLAN UNDER EDD-IV, SYANA.

Amount

Carriage of fallowings from ESC BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx.

STP Pole 13 Mtr Long

PCC Pole 11 Mtr Long

Pcc Pole 8.5 Mtr Long

Carriage of ACSR Weasal/Dog Conductor, AB Cable, LT XLPE Cable, G.I. Wire, 11 KV XLPE Cable, 33 KV Disc Insulator with fitting & 11 KV Disc insulator with fitting, 33 Pin Insulator with pin & 11 KV pin insulator with pin, 33 KV V-Type X-arm & 11 KV V-Type Cross Arm, M.S. Channel-Angle, Earthing Rod, Stay Set Complete & Etc as per RESPO Norms.

25 KVA Transformer

63 KVA Transformer

100 KVA Transformer

250 KVA Transformer

10 KVA Single Phase TF

The following meterial Erection & Fixing as per RESPO manual. It including the cost of labour, T&P, Carrier etc. required for proper completion of work.

Single support on PCC pole 8.5 Mtr. Long with all accessories.

Single support on STP Pole 13/PCC 11 Mtr Long with all accessories

Making of D/P for T/F on PCC pole 8.5 Mtr. Long.

Grouting concreting & Plinthing of STP/Pcc Pole as per RESPO norms.

Fixing erection & grouting of Stay set complete with binding & Nozzling of Stay wire.

Earthing of supports with the help of Earthing rod & GI wire/Earth wire.

Laying stringing & sagging of Dog conductor in 3 phase

Laying stringing & sagging of Rabbit conductor in 3 phase

Laying stringing & sagging of Weasal conductor in 3 phase

Laying stringing & sagging of 11 KV 3x120 sq mm XLPE Cable

Laying stringing & sagging of LT XLPE Cable 3.5x240 sq mm

Laying stringing & sagging of AB Cable (3X50 + 1X35+1X16) sq.mm

Laying stringing & sagging of AB Cable (3X95 + 1X70+1X16) sq.mm

Laying stringing & sagging of AB Cable (3X120+1X95+1X16) sq. mm

Installation of 25 KVA Transformer

Installation of 63 KVA Transformer

Installation of 100 KVA Transformer

Installation of 250 KVA Transformer

Installation of 10 KVA Single Phase TF

Making of Plinth of 250 KVA Transformer.

Earthing of 250 KVA T/F water level

Fencing of 250 KVA T/F

Laying stringing & sagging of G.I. Wire 3.15 mm 10 SWG

Laying stringing & sagging of G.I. Wire 4 mm 6 SWG

Fixing of Gurding M.S. Angle 65x65x6mm)/1.6 meter

Installation of Distribution Box

Grouting of Pole

Providing & Fixing of the following material by the Contractor as per UPPCL/RESPO Rules.

Gurding M.S. Angle 65x65x6mm)/1.6 meter

Distribution Box

MS Channel (Dropper) 100x50x2028

MS Angle 75x75x6x2028 mm

M.S. Top Channel (125x65x2240 mm)

MS T-off Channel 125x65x1300 mm

F-Clamp

11 KV Cross Arm Holding Clamp

33 KV Cross arm Holding clamp

Danger Board with Clamp

Stone Pad

Clamps for D.B. (40x6 mm)

Clamps for 10 KVA T/F (75x8 mm)

Clamp for D/P

Nut & Bolt

DEAD END CLAMPS WITH I-HOOK (INSULATED)

LT PIERCING CONNECTOR

SUSPENSION CLAMPS WITH I-HOOK (INSULATED)

Clamp for Gurding MS Angle

Earthing Rod

The fallowings matarial dismantalling & Carriage from site to ESC BSR including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx.

ACSR Weasal/Rabbit Conductor (Scrap) -

G.I. Wire (Scrap) -

XLPE/AB Cable (Scarap / Old And Damaged)

ST POLE 11 MTR LONG (Iron scrap)

1. Nut, Bolt, Clamps and others necessary items should be provided by contractor. 2. T and P should be and other necessary machinery should be provided by contractor. 3. All the MS Items must be Galvanized. All work will be done as per UPPCL/RESPO Rules and these work will be inspected by TPIA or any departmental authority.

Vivek Electricals