SPECIAL REPAIRS TO BLDG Nos P106 P107 AND ADMIN MT STORES BLDG AT MT POOL INS GOMANTAK UNDER GE GOMANTK VASCO

Amount

Schedule 'A' -Part I (B/R Works)

Demolition of brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.

Demolition of concrete (unreinforced) of any description and in any position not otherwise specifically provided for cement concrete all as specified and as directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings all as specified and as directed.

Supply and fixing pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge, fixed with self tapping screws all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.

S&F rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A all as specified and as directed.

Erection and Fixing only rolled mild steel work in tubular trusses including special shaped washer etc.complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.240 all as specified and as directed.

Demolition of concrete concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed.

M&L for 75mm thick PCC type C-2, 1:3:6 using 40mm graded stone aggregate as in plinth protection, sub base etc. all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles all as specified and as directed.

M&L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar cement mortar 1:4,type C1 1:3:6 using 20 mm graded aggregate complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc., including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even & smooth without using extra cement all as specified and as directed.

M&L for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork in cement mortar 1:4 finishing the surface fair and even all as specified and as directed.

M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceiling finished even and smooth without using extra cement all as specified and as directed.

Material & Labour for two coats of acrylic emulsion exterior paint (anti fungal painting-APEX or equivalent) over a coat of acrylic emulsion primer including preparation of new concrete/plastered surface of any description all as specified and as directed.

Material & Labour for one coat of acrylic emulsion exterior paint (anti fungal painting-APEX or Equivalent) including preparation of old treated concrete/plastered surface of any description all as specified and as directed.

Material & Labour for providing two coats of oil-bound distemper over a coat of alkali-resistant primer on new plastered surfaces including necessary preparation to surfaces complete all as specified and as directed.

Material and labour for preparation of new surface of wall and applying three coats of white wash, complete all as specified and as directed.

Material and labour for preparation of old surface of wall and applying one coat of white wash, complete all as specified and as directed.

M&L for applying three coats of white wash on new ceiling surface including preparation of surface all as specified and as directed.

M&L for applying two coats of white wash on old ceiling surface including preparation of surface all as specified and as directed.

Taking down chowkats or frames not exc. 1.5 sq.m each with shutters without taking off shutters from the frames all as specified and as directed.

Taking down chowkats or frames exc. 1.5 sq.m. n.exc 4 sqm each with shutters without taking off shutters from the frames all as specified and as directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each all as specified and as directed.

S & F 2nd class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and as directed.

S & F 35 mm thick 2nd class hardwood rail and style plain framed panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces all as specified and as directed.

M&L for applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer all as specified and as directed.

S&F powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. Note :- Weight of aluminium section shall be measured exclusive of all fittings fixtures, hinges, handle, bolts, rubber gasket/rubber beading and locking arrangements.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 05 sqm in each pane all as specified and as directed.

S&F aluminium alloy anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick of make M/S Kiran Netting or equivalent as approved by GE.

Taking out the rolling shutters of any size, including top cover guide channel, etc, carrying out repair as directed and re-fixing the same with applying grease etc all as specified and as directed. Note : New material such as safety locks,ball bearings,spring,gears and lath shall be measured and paid separately

S&F in repair steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete: but gear operated type with bevel gear box and crank handle thickness of lathe 1.25mm all as specified and as directed.

Supply and fix lath 1.25mm thick & 75mm wide all as specified and as directed.

Supply and fix Gears 75mm dia all as specified and as directed.

Supply and fix spring all as specified and as directed.

Supply and fix Guide rail of any size of rolling shutter all as specified and as directed.

Supply and fix rolling shutter top cover all as specified and as directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome all as specified and as directed.

M&L for applying one coat of synthetic enamel paint on old steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface all as specified and as directed.

M&L for applying two coats of aluminium paint on new steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth over a coat of aluminium primer including preparation of new painted surface all as specified and as directed.

M&L for applying one coat of aluminium paint on old steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises all as specified and as directed.

M & L for rendering a backing coat of 10 mm thick in cement mortar 1:4 to receive skirting/backing coats of tiles all as specified and as directed.

S&F coloured glazed ceramic tiles in vertical surfaces 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

M & L for non-skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exc 0.6 sqm but n exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M & L for non-skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exc 0.18 sqm but n exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

Taking up or down 20 mm steel tubing and connections, fixed to wall /floor all as specified and as directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in stone, concrete block or slab walls all as specified and as directed.

S & F in repair PVC valveless, syphonic action type, flushing cistern, 10 litres, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or level all as specified and as directed.

S & F in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern all as specified and as directed.

S & F in repairs vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets all as specified and as directed.

S & F in repairs pillar taps, 15 mm dia, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as specified and as directed.

M&L for 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work all as specified and as directed.

S&F stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions all as specified and as directed.

S & F in repairs bib taps, 15 mm dia, cast copper alloy, fancy type, with capston head, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed.

S & F in repairs towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats .(Minimum weight 190gms) all as specified and as directed.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600m all as specified and as directed.

S & F in repairs cast iron nahani trap, with steel grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4 all as specified and as directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) all as specified and as directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

Dismantling wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and as directed.

Supply and fix 10 mm thick PVC insulation panels in ceiling boards with EPS of net to 1 mm printed PVC sheet suitable placed in false ceiling grid all as specification and drawing

Supply and fixing 605 mm x 605 mm,10 mm anodised aluminium snap grid frame work for false ceiling all as specified including hangers 6 mm dia, CI (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia,40 mm long and expansion hold fasteners 12.5 mm dia,40 mm long complete all as per manufacturer's specification & as directed.

Schedule 'A' -Part II (Internal Electrification)

Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete (fittings such as switches, ceiling roses pendants, regulators, sockets etc to be measured separately) removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition separately) and making good disturbed surface of wall, floores etc all as specified and as directed.

Material and labour for point wiring FR complete with 1100 V grade 1.5 Sqmm single core FR PVC insulated unsheathed multistranded copper conductor cable drawn through in and including non metalic rigid Concealed conduit of dia 20mm ISI marked with all accessories concealed in wall, ceiling including 1.5 sqmm single core PVC insulated and unsheathed copper conductor cable as earth continuity wire including testing all as specified and as directed for one light point, fan point, exhaust fan point controlled by one switch.

All as per serial item No 70 here-in-before, but one 5 pin switch socket outlet 5 Amps on independent board controlled by one switch all as specified and as directed

All as per item No 70 here-in-before, but one 6 pin socket outlet 15 Amps independent/metal plug and socket with cables 4 sqmm size copper FR PVC insulated cable multistranded and 4 sqmm cable conductor for earth wire all as specified and as directed

Supply and fix modular switch one way 6 Amp 1 module all as specified and as directed

Supply and fix modular white cover plate with frame ,3 module all as specified and as directed.

Supply and fix metal flush box 3 module all as specified and as directed

Supply and fix modular switch one way 16 Amp 1 module all as specified and as directed.

Supply and fix modular socket , 6 A -2/3 pin combined 2 module all as specified and as directed

Supply and fix modular socket , 15 A -2/3 pin combined 2 module all as specified and as directed

Supply and fix MCB, single pole, 6-32 Amp, 240 Volts, 'C' Curve 10KA all as specified and as directed

Supply and fix MCB, single pole and neutral, 6-32 Amp, 240 Volts, 'C' Curve 10 KA all as specified and as directed

Supply and fix MCB, Triple pole and neutral , 63 Amp, 415 Volts, 'C' series 10 KA all as specified and as directed

Supply and fix sheet metal enclosure (DB) for MCBs, 4 way, triple pole and neutral, 415 Volts, double door with 200 Amps rated bus bars complete all as specified and as directed

Supply and fix sheet metal enclosure (DB) for MCB's, 8 way, single pole and neutral, 240 volts, double door with 100 Amp rated Copper bus bar with IP 54- IK 09 complete all as specified and as directed

M&L for ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

Supply and fixing LED Linea plus Elegant die cast aluminium Batten 23W 4 ft tube , complete etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size & removal of old unserviceable one all as specified and as directed. Make : Philips HSN Code No. 94051090 or Equivalent in Bajaj/Havells.

Supply and fixing of LED Sparkle 36W high bay with injection moulded high performance poly carbonate refractor including making electrical connection to the fitting with suitable size of service wire , all as specified and as directed. Make: Cat Part No. LWV11-36-CDL-RFR of Crompton or equivalent in /Havells/Philips

M&L for submain wiring with 4 sqmm 2 Runs of single core multi stranded FR PVC in related unsheathed cable 1100 Volts with copper conductor drawn in and including non metalic rigid conduit of dia 20mm ISI marked with all accessories such as tees, elbows, junction box Reducers etc as required along with 1 Run of 4 sqmm single core PVC insulated unsheathed copper conductor as continuous earth wire and connecting to Existing main switch board \ Distribution Board and testing on completion including taking down old submain wiring and type of conduct complete all as specified and as directed.

M&L for submain wiring with 10 sqmm 4 Runs of single core multi stranded FR PVC in related unsheathed cable 1100 Volts with copper conductor drawn in and including 25 mm wide in non metallic rigid concealed conduit with all accessories such as tees, elbows, junction box Reducers etc as required along with 2 Run of 6sqmm single core PVC insulated unsheathed copper conductor as continuous earth wire and connecting to Existing main switch board \ Distribution Board and testing on completion including taking down old submain wiring and type of conduct complete all as specified and as directed.

M&L for submain wiring with 2.5sqmm 2 Runs of single core multi stranded FR PVC in related unsheathed cable 1100 Volts with copper conductor drawn in and including non metalic rigid conduit of dia 20mm ISI marked with all accessories such as tees, elbows, junction box Reducers etc as required along with 1 Run of 2.5 sqmm single core PVC insulated unsheathed copper conductor as continuous earth wire and connecting to Existing main switch board \ Distribution Board and testing on completion including taking down old submain wiring and type of conduct complete all as specified and as directed

M&L for earthing complete with copper plate earth plate electrode 60 cm x 60 cm x 3.15 mm thick buried directly in ground vertically to a depth not less than 2.25 m below ground level with top connected to Copper earth strip 20 x 3mm by means of bolts, nuts, check nuts and washers of brass and earth lead connected to main DB panel /meter box panel with including necessary and earth work and excavation including PCC chamber 1:3:6 and RCC cover all as specified and or shown in electric plate No 3 of SSR-I.

S&F air circulators 450mm sweep 230V, AC, SP oscillating swing type with all accessories and fixing arrangement including taking down of old fan to store all as specified and as directed. Model : swing Make:CG/BAJAJ/Khaitan

S & F freedom+ LED Street light 30W including making electrical connection to the fitting with Suitable size of service wire , taking out Old defective fittings all as specified and as directed. Make : Cat Part No. LSTS-30-CDL of Crompton or equivalent in /Havells/Philips

S&F stepped type modular fan regulator, 120W, 2 Module etc including removal of old all as specified and as directed

Taking down and refixing ceiling fan of any sweep complete including provision of cable from ceiling rose or connector to fan all as specified and as directed

Painting of ceiling fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. all as specified and as directed

Schedule 'A' -Part III (External Electrification)

Supply, Laying, joining & testing LT XLPE Insulated & sheathed armored electric cables with multistranded aluminium conductor cable 1100 volts grade, laid in trenches/ ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in protection pipe of suitable sizes including cable gland of suitable sizes & aluminium lugs for connection for cross- sectional area 35 Sq mm 4 Core complete all as specified and as directed. Note : Cable Protection pipe shall be measured and paid for separately.

Supply and lay High density poly-ethylene pipes ( HDPE) of pressure rating 6kgf/sqcm fixed complete for road crossing of size 50mm bore all as specified and as directed

Excavation in trenches in hard/dense soil n. exc. 1.5 m wide and n. exc. 1.5 m depth and getting out, including trimming the sides and forming bottom surface to required levels for laying cables etc complete all as specified and as directed

Excavation in trenches in soft disintegrated rock n. exc. 1.5 m wide and n. exc. 1.5 m depth and getting out, including trimming the sides and forming bottom surface to required levels for laying cables etc complete all as specified and as directed

M & L for fine river sand for cushioning in layers of sand 8 cm before laying of cable & 15 cm after laying of cable (total 23 cm ) in trenches, duly punning to a thickness of 18 cm for cable protection complete all as directed and as specified. Note:- Thickness after punning shall be measured for payment.

Supply and lay PCC cable cover class LV type 1 flat size 250mmx150mmx40mm for protection cover to underground cable all as specified and as directed

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated material all as specified and as directed

Removal of excavated material to a distance not exceeding 50 m and depositing where directed.

M & L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for pole foundation and making good damaged road surface all as specified and as directed

Mehta and Co.

SHIVRAJ CONSTRUCTIONS

M/S. M M S ENTERPRISES

M/S jvsr constructions

Tara Construction