Remodeling the 4th Floor of Panagal Building, Saidapet with required Partitions, Panelling, false ceiling arrangements

Amount

Remodeling the 4th Floor of Panagal Building, Saidapet with required Partitions, Panelling, false ceiling arrangements Estimate Amount Rs.97.89 Lakh

Supply and Installation of Plywood Partition consists of Aluminium framework of 50x25x1.2mm thk fixing on 600mm centre to centre spacing on both vertical and Horizontal sides. This also includes one layer of 12mm plywood and 1.0mm laminate finished on both sides; In addition to that 50mm rockwool will be provided in the proposed aluminium framework spacing; Make for Laminate - Merino / Greenlam, Aluminium Channel - Alumax / EQ; Plywood - Kitply / Archidply; Providing Gypsum boards for Posters instead of plywood will be considered as same measurement. No additional / Deductions will be considered

Providing and fixing 75 mm thick Double skin Calcium Silicate board of 12.5 mm thick over 50x25x1.2mm aluminium framework. Square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with jointing compound, paper tape. Necessary cutouts shall be provided for taking of supply and return air ducts / openings which shall be neatly finished after fixing of ducts thereby leaving no gaps, etc., complete. Make - Ramco Hilux; Aluminium Channel - Alumax / EQ

Supply and Fixing of Single glazed partition system consist of Aluminium section of 25x45x2mm thick. All sections duly anodised up to 20–25 microns with 6063-T6 grade and required accessories i.e. glass to glass aluminium 25*45mm mm frame sections, T section & 90 degree L sections & Glass packing to adjust the floor level. Ceiling profile, Floor profile and wall profile are 25 mm visible face and 45mm wide with 10mm/12mm toughened glass & insertion; Make Partition Channels - Real Line / EQ; Glass - Saint Gobain / EQ

Supply and Installation of Plywood Partition consists of Aluminium framework of 50x25x1.2mm thk fixing on 600mm centre to centre spacing on both vertical and Horizontal sides. This also includes one layer of 12mm plywood; In addition to that 50mm rockwool will be provided in the proposed aluminium framework spacing; Make for Laminate - Merino / Greenlam, Aluminium Channel - Alumax / EQ; Plywood - Kitply / Archidply

Supply and Installation of Rafter Panelling consists of Aluminium framework of 50x25x1.2mm thk fixing on 600mm centre to centre spacing on both vertical and Horizontal sides. This also includes one layer of 12mm Rafters; Aluminium Channel - Alumax / EQ; Rafters - Glow / EQ

Supply and Installation of Curved Plywood Partition consists of Aluminium framework of 50x25x1.2mm thk fixing on 600mm centre to centre spacing on both vertical and Horizontal sides. This also includes one layer of 12mm plywood; In addition to that 50mm rockwool will be provided in the proposed aluminium framework spacing; Make for Laminate - Merino / Greenlam, Aluminium Channel - Alumax / EQ; Plywood - Kitply / Archidply

Supply and Installation of Plywood Partition with Fluted Laminate consists of Aluminium framework of 50x25x1.2mm thk fixing on 600mm centre to centre spacing on both vertical and Horizontal sides. This also includes one layer of 12mm plywood and 1.0mm laminate finished on both sides; In addition to that 50mm rockwool will be provided in the proposed aluminium framework spacing; Make for Laminate - Merino / Greenlam, Aluminium Channel - Alumax / EQ; Plywood - Kitply / Archidply

Providing and laying of Raised Flooring on the Power room as per the request of the Client / Architect

Supply and Installation of Aluminium skirting 75mm as per the approved design and make. This rate shall include only for aluminium skirting and installation for the proposed areas

Supply and fixing of 12mm/19mm Aluminium T Profile / Hat Profile / L Profile (Make: Doyle Asia/ EQ)

Supply and Installation of Gypsum false ceiling, using 12.5mm thick tapered edge screws fixed to the underside of the ceiling section at 610mm c/c max and perimeter channel all around the wall or partition and Intermediate channel at 1200mm c/c max which is suspended by ceiling angle and the joints of the boards are filled and finished with jointing compound and joint paper tape. Make GI Channels - USG / Diamond; Gypsum Board - USG/ EQ

Supply and Installtion of Single/ Double floor spring door with 10mm toughened glass using corner pivot 1200mm 'H' handle and bottom lock. This rate shall include all necessary materials, Labours, etc,. To finish the proposed work; Make Glass - Saint Gobain / EQ; Hardwares - Dorma / Geze, 1200x2400mm or lower as per site conditions

Supply and Installation of Single Glass Stile Door having size of 75*45 with door profile RL75T ie. 6063-T6 Virgin grade duly Anodized Aluminium Door Sections having sizes of 75x45x2mm thick, 10 mm toughened Glass including dorma make Door Closer, 4nos Flush Hinges, with dorma death Sash lock complete with dorma 300mm offset handle and 70mm cylinder both side key,Door Stopper & Gaskets; Make Glass - Saint Gobain; Hardwares - Dorma / Geze; 1050x2400

Supply & Installation of 2hr fire rated steel door Fire rated gasket 4mm Thick x 13mm, Black (Mtr) 200 X 300mm Fire rated glass for vision panel HDC003 Door closer with Std arm, Silver - Hormann 4330 Ball bearing butt hinges, Finish SSS - Hormann D Type Pull Handle 19x250 mm Finish : Satin, Hormann H4 Deadlock/70mm EPC Both side key - Hormann with Panic Bar Installation Kit Non-Fire rated Silicone sealant Size : 1100mm X 2400mm

Supply & Installation of 2hr fire rated steel door Fire rated gasket 4mm Thick x 13mm, Black (Mtr) 200 X 300mm Fire rated glass for vision panel HDC003 Door closer with Std arm, Silver - Hormann 4330 Ball bearing butt hinges, Finish SSS - Hormann D Type Pull Handle 19x250 mm Finish : Satin, Hormann H4 Deadlock/70mm EPC Both side key - Hormann Installation Kit Non-Fire rated Silicone sealant Size : 900mm X 2400mm

Supply and Installation of Laminate Panelling less than 100mm with 19mm thick commercial plywood fixed with 1.0 Laminate. This rate shall include all necessary hardwares, matrials, etc,. To complete the proposed work

Supply and Installation of Black-out Roller blinds as per approved make. (basic rate 200/sft)

Supply and Installation of 6mm thick lacquered glass fixed on existing plywood surface finished with Silicon clear or white sealant. This rate shall include all necessary hardwares, matrials, etc,. To complete the proposed work

Supply and Installation of Wall Posters as per the request of Architect / Clinet

Supply and Installation of 19mm thick commercial plywood fixed on top of the false ceiling for light support or any other requirements at site. This rate shall include all necessary hardwares, matrials, etc,. To complete the proposed work

Supply and Installation of 6mm corian cladding fixed on existing wall or plywood. This rate shall include all necessary hardwares, materials , etc to finish the proposed work

Supply and Installation of 6mm corian cladding fixed on existing wall or plywood. This rate shall include all necessary hardwares, materials , etc to finish the proposed work; Less than 300mm measurements will be considered as Rmt

Installation of Profile light cutting work as per the request of the Client / Architect

Supply and Installation of Mirror as per the Client requirements

Supply and Installation of frosted stickers on the requested Glass doors or partition. This rate shall include all necessary materials, labour, transportation, etc,. To finish the proposed work

GST Amount for providing Service to Government Contract Works for the above Construction Work. { GST Amount is the Total GST Amount for overall quoted amount Construction above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

S.ANBU (BID ID -1547170)