Upgradation and widening of Daman Municipal Council Roads at Moti Daman. (Length-5.845Km). (2nd call) (E-23713)

Amount

Civil work

Clearing and Grubbing Road Land. (Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.) - By Mechanical Means In area of light jungle.

Removal of Telephone / Electric Poles and Lines-Removal of telephone / Electric poles including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and leads and stacking the serviceable and unserviceable material separately.

Dismantling of flexible pavements and disposal of dismantled materials up to all leads and lifts, stacking serviceable and unserviceable materials separately)

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to all lead and lifts, stacking serviceable and unserviceable materials separately.

Dismantling of Paver Blocks Pavement-Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lifts as directed by Engineer Incharge

Excavation for Road Work-Earthwork in cuting in all sorts of soil and soft murrum including conveying and spreading the stuff, embankment as and where directed within 200meters from the end of the cutting with all required lead and lift. (A) All types of Soil

Construction of Subgrade-Construction of sub-grade with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 Subgrade CBR ≥ 8

Construction of Subgrade-Construction of sub-grade with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 Subgrade CBR ≥ 8-RA No.

Granular Sub-Base-Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401.

Wet Mix Macadam-Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including remixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Dry Lean Conctrete-Construction of dry lean cement concrete Base over a prepared Sub-Base with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.

Providing and Laying of thin white topping with plain cement concrete pavement over existing surface with approved M-40 grade and as per IRC SP-76, coarse and fine aggregate conforming to IS 383, maximum size of fine aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form of slip form paver, spread, compacted and finished in a continuous operation including provision af contraction joint, joint filler, sealant primer, joint sealant, admixtures as approved, curing compound, finishing to limes etc. and grades as directed by Engineer Incharge.

Kerb with L-section Channel-Construction of cement concrete kerb with L-section channel with top and bottom width 115 and 250 mm respectively, 325 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 250 mm wide, 100 mm thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 Market Rate

Traffic Signs-150 cm X 90 cm Rectangular -Place identification sign :-Providing and fixing sing boards made out of 2mm aluminium sheet; size 150 x 90cms. rectangle as as per the design of IRC-67-1977 pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro refiective sheeting as per latest M.O.S.T. Specifications; Letters and numerals should be as per IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated from suitable size iron angle of 50x50x5mm & 75x75x6mm as required; painted with best quality epoxy coatings in black and white bends. the details of symbol or inscription / numerals for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including excavation curing etc. complete under the supervision of engineer in charge. (B) High Intensity Grade.

FLAG TYPE AD-Road direction sign board (Small) :-Providing & Fixing sign boards made out of 2mm aluminium sheet, size 60 x 60 cms square, as per the attached drawing pre treated with phospheting process & acid etching. coated with one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with retro reflective sheeting as per latest M.O.S.T. 3.1m long (2nos) stand post and frame fabricated from iron angle of 35 x 35 x 3 mm & 50 x 50 x 5 mm as required painted with best quality epoxy coating the fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 cms for each leg, including excavation curing etc. complete under the supervision of engineer in charge. (B) High Intensity Grade.

90 cm Equilateral Triangle-Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC : 67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) - High intensity Grade.

90 cm Octagon-Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC : 67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) - High intensity Grade.

Road Marking-Painting two coats after filling the surface with synthetic enamel paint in all shades on new concrete surfaces as directed by Engineer Incharge

Road Stud-Supply & Fixxing cats eye (stimsonite) made out acrilo beautile sterrine injuction high compressed modling with reflector made of MMC (prismatic type size 12 cms x 6 cms x 2.5 cms provided with bituminous adhesive 100 g with each unit for fixing. (High Intensity Grade)

Street Lighting-Decorative Pole Street Lights Height 6-8mt made up to cast Aluminium casting with carving on top and with external of Galavanized Steel Pipe with top square light fixture in steel fabricated with clear glass and 50W Led/ 3000K colour warm white IP 65 rated of Light fixture with cable complete and foundation bolts. As per Apporved Drawing and As per directed by Engineer Incharge.Single Arm at Every 30 m

Distribution Boards (DB)

Wiring and Cables

KAMLA CONSTRUCTION