Works Contract in Kadayampatty Section

Amount

Work contract schedule

Excavation of pole pit upto 27' (8.0 m) Pole by using JCB or manual

Excavation of pole pit above 8.0 Mtr pole PSC/RCC/RSJ pole by using JCB or manual

Excavation of Stay pit 4.5' to 5' depth by using JCB or manual

Excavation of Hard rock without blasting (where houses are located)

Erection of PSC/ RCC poles/Metal poles upto 8.00m. (27') by using JCB or manual

Erection of PSC/ RCC poles/Metal poles above 8.00m by using JCB ormaual

Erection of stay set complete

Fixing of HT "V" cross arms (all types) / Channel cross arms/ Guarding Cross arms

Fixing of Tapping Channel Cross arm

Fixing of LT 3 phase cross arms

Fixing of LT Single phase cross arms

Fixing of HT/LT TI Fittings

Fixing of Aluminium Knob

Fixing of HT pin Insulators 22 KV

Fixing of HT 11 KV strain disc.

Fixing of LT pin Insulator

Fixing of LT shackle

Paving of Conductor, stringing etc., complete with ACSR 7/4.09 mm Raccoon conductor

Paving of Conductor, stringing etc., complete with ACSR 7/3.35mm / AAAC 3.15 mm Rabbit conductor

Paving of Conductor, stringing etc., complete with ACSR 7/2.59 mm / AAAC 2.50 mm Weasel and ACSR 7/2.11 mm conductor

Releasing of ACSR/AAAC conductors from conductor drum and coiling 7/2.59, AAAC 7/2.50, ACSR 7/3.35, 7/3.15 MM

Erection of street light including fixure fitting

Erection of street light service

Releasing of single phase service and re-fixing.

Releasing of 3 phase service and (upto 50 HP) re-fixing.

Sleeve concreting including materials (Cement + River Sand/ Msand and Blue metals and watering)

Earthing of pole with coil earthing including burying looping and binding.

Loading of poles upto 8.0 M/ 27'

Loading of poles above 8.0 M

UnLoading of poles upto 8.0 M/ 27'

UnLoading of poles above 8.0 M

Loading of materials

Unloading of materials

Loading or unloading of Transformer upto 100 KVA

Erection of New Transformer all capacities (with jumpering)

Dismantling of Transformer all capacities (with jumpering)

Replacement of failed transformer all capacites (with Jumpering)

Flat guarding including fixing of 2 Nos. cross arms.

Transport of Poles /Materials/conductors and other charges Below 8 Kms (Plains)

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual up to 100 m

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual beyond 100 m

Dismantling of RCC, REC, PSC pole of all sizes including the closing of the pit

Dismantling of stay set complete

Dismantling of 1ph xarm

Dismantling of 3ph xarm

Dismantling of HT/LT TI fitting

Dismantling of 22kV Pin insulator

Dismantling of 11 kV strain disc

Dismantling of LT Pin insulator

Dismantling of LT shackle

Dismantling of Aluminium knob

Dismantling of conductor of size ACSR 7/2.59 /AAAC 7/2.50

Dismantling of conductor of size ACSR 7/3.35 /AAAC 7/3.15

Dismantling of HT "V" cross arms (all types) / Channel cross arms/ Guarding Cross arms

Dismantling of Tapping Channel Cross arm

Labour charges for alteration of Back Clamps/ Stay Clamps to suit for the works

Drilling of hole in channel only 3/4" & 1"

Cutting of pipe

Erection of Transformer structure complete in all respects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pits with collar including painting of metal parts, structure poles, fixing of top channel, seating channel, belting angle including concreting (Except erection of Transformer)

Erection of Single Pole Transformer structure complete in all respects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pit with collar including painting of metal parts, structure poles, fixing of tapping channel, transformer bed structure including concreting (Except erection of Transformer)

Erection of D.P. structure with AB switch, top channel, cross bracing, earthing, painting, providing stay including concreting

Dismantling of Transformer structure complete in all respects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pits with collar including painting of metal parts, structure poles, fixing of top channel, seating channel, belting angle including concreting (Except erection of Transformer)

Re-sagging ACSR 7/4.09 mm Raccoon conductor

Re-sagging ACSR 7/3.35mm / AAAC 3.15 mm Rabbit conductor

Re-sagging ACSR 7/2.59 mm / AAAC 2.50 mm Weasel and ACSR 7/2.11 mm conductor

Releasing of Grills from RCC Poles

Cutting of coconut leaves

Clearing of branches of trees

G.S.T. @18% should be Entered by the Bidder