COMPREHENSIVE MAINTENANCE OF NWC BUILDING OF B/R AND E/M WORKS AT INS MANDOVI

Taking down shutters of any description not exceeding 1 sqm each from chowkhats, complete all as specified.

Taking down shutters of any description, exceeding 1.0 sqm but not exceeding 2 sqm each, from chowkhats, complete all as specified.

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) all as specified.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4.0 sqm each but with shutters (without taking off shutters from the frames) complete all as specified.

Taking down chowkats or frames not exceeding 1.5 Sqm each complete all as specified.

Taking down shutter and refixing in same opening after rectification work complete of any description n exc 1 sq. m each

Ditto. all as per above item no 5 but exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified.

Taking down shutter and refixing in same opening after rectification work complete of any description exc 1 sq. m and n exc 2 sq. m each

Material and labour for Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in CM 1:6

Supply and fix extruded aluminium alloy handles, 150 mm long fabricated type anodised all as specified

Supply and fix in repairs extruded aluminium alloy handles, 150 mm long fabricated type anodised all as specified

Supply and fix extruded aluminium alloy handles, 100 mm long fabricated type anodised all as specified

Supply and fix in repairs extruded aluminium alloy handles, 100 mm long fabricated type anodised all as specified

Supply and fix alluminium, anodised, barrel tower bolts of extruded section of size 150 mm long.

Supply and fix in repairs alluminium, anodised, barrel tower bolts of extruded section of size 150 mm long.

Supply and fix alluminium, anodised, barrel tower bolts of extruded section of size 100 mm long.

Supply and fix in repairs alluminium, anodised, barrel tower bolts of extruded section of size 100 mm long.

Supply and fix 300 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy all as specified

Supply and fix in repairs 300 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy all as specified

Supply and fix alluminium plate type II, gate and shutter, hooks and eyes of size 150 mm long Fixed in repairs all as specified.

Supply and fix 125 mm long, hasp & staple, safety type, aluminium anodised hinge pin including bolt to hinge plate & fixed with screw fixed in repairs all as specified

Ditto. all as per above item but 75 mm long.

Supply and fix 4 mm thick, sheet glass, ordinary quality and glazing with oil putty / beading in squares not exceeding 0.5 sqm each pane all as specified .

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty / beading in squares exceeding 0.5 sqm each pane fixed all as specified .

Supply and fix 4 mm thick figured glass, pin head type and glazing with oil putty / beading in squares exceeding 0.5 sqm each pane fixed all as specified

Supply and fix door closer, hydraulically regulated, designation No. 3, universal type suitable for door shutters of weight between 61 to 80 Kg with aluminium (die cast) body, fixed in repairs all as specified

Supply and fix 40 mm dia, cupboard knobs fixed with nut, screw and washer of aluminium anodised fixed in repairs.

S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of Frame size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and including MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge, as per specification & drawing Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

Supply and fix in repairs 140mm Floor door stopper of aluminium alloy body and tongue, anodised with hard draw steel spring complete all as specified & directed.

Supply and fix in repairs 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws in timber frame work in cup board shelves fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fix Continuous piano hinges mild steel, bright finish or electro galvanised 30mm flaps

Supply and fix in repairs Continuous piano hinges mild steel, bright finish or electrogalvanised 30mm flaps

Supply and fix 100mm long Anodised aluminum Hasp and staple including bolt to hinge plate fixed with screws

Cutting holes in brick walls, exc. half but not exc. one brick wall built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3, or cement concrete 1:2:4 type B1 complete all as specified

Supply and fix MS mortise lock, 4 levers, vertical type, size 65mm long fixed in repairs complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair MS butt hinges, medium weight, cold rolled mild steel 100mm long complete all as specified and directed.

Supply and fix in repair MS butt hinges, medium weight, cold rolled mild steel 75mm long complete all as specified and directed.

Material and labour for greasing and easing only to existing rolling shutters complete area of shutter exc 5.0 Sqm and not n exc 10 Sqm each.

Supply and fix Curtain rails anodised aluminium alloy with fixing brackets, stops, rollers etc.

Supply and fix aluminum powder coated window/ventilator shutter including frame , any type (sliding or open-able ) with frame , & other similar work etc fabricated by using the aluminium section including necessary arrangement to receive 4mm thick sheet glass or wire mesh with aluminium channel beading, stainless steel screws, rollers, maruti lock & F frame including the cost of rubber gasket / rubber beading rollers, maruti lock & F frame etc complete . But the weight of the rubber gasket / beading rollers, maruti lock will not be measured with weight of aluminium shutter Note :- Sheet glass & wire mesh shall be measured & paid separately

Taking down cement plaster of stone /Pvc block /brick wall / top of chajja, or concrete surface of any description including raking out joints hacking for key securing down with water etc and removal of debris to outside of INS Mandovi Area including filling of open joints in cement mortar 1:6 Complete

Material and labour for Rendering 15 mm thick (10+5) cement plaster in ready mix cement mortar 1:4 of approved make on brick masonry surfaces or surface other than fair face of brickwork with WPC as per manufacturer instruction and finished surface even and smooth without using extra cement complete all as specified and directed Note: Waterproofing will not be measured separately

Material and labour preparation of new surface of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ ltr and UV resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/ 10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm over new surface.

Material and labour for Dubbing out average 15mm thick in ready mix CM 1:6 of approved make on irregular face of walls (when specifically rendered in writing)

Material and labour for rendering 10 mm thick in ready mix cement mortar 1:6 of approved make on fair faces of brick work or concrete surfaces finish even & smooth with using extra cement

Material and labour for preparation of newly plastered surfaces of wall preparatory to distempering, Priming plastered and other surfaces with alkali resistant priming paint, Providing and applying plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth & distempering walls with two coats of distemper oil emulsion, white or tinted

Material and labour, 5 mm thick plastering in ready mix cement mortar 1:3 of approved make finished even and smooth without using extra cement on soffit of chajja and roof projection or other similar work

Material and labour for preparation of newly plastered surfaces of ceiling preparatory to distempering, Priming plastered and other surfaces with alkali resistant priming paint, Providing and applying plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth & distempering walls with two coats of distemper oil emulsion, white or tinted

Washing rubbing down and stopping of distempered surfaces any type of wall including preparation and making smooth surface by applying ready mix putty where required then apply two coats of distemper oil emulsion of any tint specified by Engineer -in-Charge

Washing rubbing down and stopping of distempered surfaces any type of wall including preparation and making smooth surface by applying ready mix putty where required then apply two coats of distemper Plastic emulsion of any tint specified by Engineer -in-Charge

Material and labour for Washing, rubbing down and stopping of old painted surfaces of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ ltr and UV resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/ 10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm over old surface

Material and labour for supply and application of 7 layer SHR waterproofing coating system on leaking concrete surfaces by thorough surface preparation, opening of cracks followed by one absorption coat of thermocol wp51 or equivalent, nano tech modified, uv resistant electroplast clear coat having min 50% solids, filling of crack, then over coating with sandwich coat of electrometric (thermocol wp51 + cement) waterproofing layer weigh 80 gsm non woven fibre mesh, application of 3 rd coat of elastomeric waterproofing layer having +450% elongation, tensile strength min 2.2 with two cats of thermocol 0.3c pure acrylic based, uv resistant map and then top-coated non-yellowing bio- organism resistant.

Material and labour Drilling and fixing Teflon nozzles in RCC members, including drilling holes (drilling 12 mm dia, 40mm deep holes in structural members at the intervals of 600mm c/c in staggered manner or s directed by Engr-in Charge in RCC structure elements and cleaning the holes (to clean the holes by air blower prior to fixing nozzles) and fixing of nozzles (to insert 12mm dia Teflon nozzles in cleaned holes external end of nozzles (to insert 12mm dia Teflon nozzles in cleaned holes external end of nozzles to be machined to receive outlet of grouting gun and fixing it inside the holes by applying thyrotrophic epoxy putty to ensure complete sealing and curing the system for minimum 12 hrs) and cutting of nozzles (to cut the nozzle by chisel after completion of grouting without damaging structural elements etc complete.

Providing and injection grouting low viscosity (3-5 cps) high molecular weight monomer APCOREP INJECTION GROUT LV or equivalent into concrete by injection grouting at 150-300 mm centre to centre through nylon nipples of 12 mm dia fixed into drilled holes at 3-5 kg /cm2 pressure and having tensile strength of I 0-15 N/mm2 (ASTM-D-638-95) & flexure of 20-25 N/mm2 (ASTM-D-790- 96). Drilling holes and fixing of nozzles paid separately

Injecting low viscosity (3-5 cps) high molecular weight by pressure and using mechanized injector gun with accessories, till nozzles refuses to accept the grout, Including, Mixing of materials( Mixing material components (part a & b) in required quantities as per manufacturer’s instruction by weigh batching) and Grouting ( Filling the grouting gun with monomer. Maintain desired pressure in the gun by air compressor; maintain the pressure at exit (4 to 5 Kg/ Cm2) by monitoring pressure gauge at exit. Grouting the material through prefixed nozzles in the structural elements till its refusal. Sealing the nozzle with epoxy putty after the refusal. Monitoring leakages through other nozzles while grouting and seal them as per the requirement. Repeat the process for all the nozzles. the operation to be within pot life of the material.)and Cleaning of gun and accessories ( the gun and accessories like valves, pipes and other fixtures to be cleaned with thinner after the operation to avoid jamming of the gun.) etc. complete.

Material and labour TMT bars 10 mm cut to length bent to shape required including cranking and binding with MS wire n less than 0.9 mm dia but for stiffener of chain link fencing

Demolition of cement concrete of any description in any position not otherwise specifically provided for

Material and labour Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate), 25mm thick on concrete surface over top of RCC chajjas with using waterproofing compound as per manufacture instruction finished even & fair with using extra cement Note: Waterproofing will not be measured separately

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

Material and labour Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Material and labour Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Supply and fix Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 Gde E-165 ®

Material and labour for 2 coats of synthetic enamel paint on new Steel surfaces of any description, not otherwise descripton-bed, over 10cm width or girth including preparation of new surfaces .

Demolition of precast concrete block built in cement mortar complete all as specified and as directed .

Material and labour for precast PCC 1:3:6 type C1 ( 20 mm graded aggregate ) block masonry with solid blocks, exc 10 cm in width and setting in CM 1:6

Material and labour for rendering 10 mm thick in ready mix cement mortar 1:6 on fair faces of brick work or concrete surfaces finish even & smooth with using extra cement

Preparation of newly plastered surfaces of wall and apply two coats of white wash

Disconnecting existing water tanks exc. 250 ltr n. exc. 500 ltr, setting aside for repairs, cleaning etc. with all fittings & pipe and hoisting if required reconnecting and re-fixing in position.

Disconnecting existing water tanks exc. 500 ltr n. exc. 1000 ltr, setting aside for repairs, cleaning etc. with all fittings & pipes and hoisting if required reconnecting and re-fixing in position.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Material and labour Screed bed or bedding layer of mortar 15 mm thick 1:6 for laying floor finishes

Material and labour Rendering 10 mm thick cement plaster in ready mix cement mortar 1:4 on Vertical Surface

Material and labour for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including gridding and polishing types.

Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations,

Glazed ceramic coloured tiles in vertical surface 350 x250x 7 mm/ 450x 350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match

Material and labour Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

Material and labour Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

Material and labour Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

Material and labour Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match

Material and labour Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

Material and labour Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments

Taking down steel tubing and connections 15 mm bore

Taking down steel tubing and connections 20 mm bore

Dismantling water tanks and removing to store exe 250 Ltr & n exe 500 Ltr

Dismantling water tanks and removing to store exe 500 Ltr & n exe 1000 Ltr

Supply and fix of CPVC 20mm pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply and fix of CPVC 25mm pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply and fix bib taps (long body) , cast copper alloy with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule & fixed . Size 15mm fixed in repair

Supply and fix 2 way bib taps , cast copper alloy with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule & fixed . Size 15mm fixed in repair

Supply and fix bib cock with wall flange , cast copper alloy with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule & fixed . Size 15mm fixed in repair Make Jaquar (OPP-CHR-15037PM)or equivalent model in KOHLER, CERA, HINDWARE, GROHE

Supply and fix pillar cock auto closing system , cast copper alloy with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule & fixed . Size 15mm fixed in repair Make Jaquar (PRS-CHR-709) or equivalent model in KOHLER, CERA, HINDWARE, GROHE

Supply and fix wall mixture with provision for overhead shower with 115mm long bend pipe on upper side connecting legs & wall flange , cast copper alloy with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule & fixed . Size 15mm fixed in repair Make Jaquar (CON-CHR-273KNUPR) or equivalent model in KOHLER, CERA, HINDWARE, GROHE

Supply and fix angular stop cock with wall flange , cast copper alloy with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule & fixed . Size 15mm fixed in repair Make Jaquar (ARI-CHR-39053) or equivalent model in KOHLER, CERA, HINDWARE, GROHE

Supply and fix 15 mm size stop valve copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union & fixed in repair

Supply and fix pillar taps,15 mm bore fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure and fly nut screwed for iron pipes complete fixed in repairs

Supply and fix in repairs Brass chromium plated shower rose 125mm size with Shower arm 15 mm dia size &195mm long with bend of 45degree with flange, including fixing to steel pipe or union

Supply and fix PTMT bathroom mirror cabinet of Size 600mm x 450mm x 200mm with all necessary arrangements for fixing to wall

Supply and fix Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device(colour : white )

Supply and fix Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed."

Supply and fix in repairs brass chromium plated tubular towel rail 20mm dia including all necessary fittings complete all as specified

Supply and fix in repairs grating doom 100mm dia of PTMT (Minimum weight 40 gms) including jointing with solvent cement

Supply and fix 32mm Waste pipe 800mm long in repairs

Supply and fix 2 in 1 Health Faucet with 8MM dia 1 Mtr long flexible tube and wall hook (Chrome Plated) Make : Make Jaquar (ALD-CHR-573) or equivalent model in KOHLER, CERA, HINDWARE, GROHE

Supply and fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) ( excluding flushing cistern and flush pipe ) fixed in repairs

Supply 10 litres Capacity PVC valveless,syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including bracketSupply and fixlush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern & fixing High or low level flushing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any

Supply and fix PVC Connection of size 15 mm ,450 mm long with PTMT nuts complete all as specified

Supply and fix PVC Connection of size 15 mm ,600 mm long with PTMT nuts complete all as specified

Supply and fix Wash basins, Vitreous China (flat back or angle back type) 550mmx400mm size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe fixed in repairSupply and fixlush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern

Supply and fix sinks with drainage board made of stainless steel 1 mm thick kitchen with plug ,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm bowl size 410mm x 330mm x160mm

Supply and fix 500 Litre Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Supply and fix 1000 Litre Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Supply and fix Ball valves 25mm bore dia high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed in repairs . (Minimum weight 15mm-142gms/ 2 0 m - 2 1 0 g m s . /25mm-455gms/ 40mm- 690 gms)

Supply and fix 25 mm bore CPVC BALL VALVE

Supply and fix 25 mm CPVC Tank Adaptor

Material and labour for 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed in repairs

Taking down eaves gutters, sewage lines and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

Supply and fix 160 mm Ø PVC (SWR) pipe with single socketed in any length solvent cement jointed fixed to wall/column

S& F PVC (SWR) bends any radius 160 mm bore with access door

Supply and fix 110 mm Ø PVC (SWR) pipe with single socketed in any length solvent cement jointed fixed to wall/column

S& F PVC (SWR) bends any radius 110 mm bore with access door

Dismantling boarding, any description, fixed in any position with Screws

Supply and fix Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm all as specified including 12mm Fibre insulation boards, ordinary type,. and fixed with Hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Dismantling structural steel work in cladding doors, gates but excluding framed truss etc

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

Material and labour for cleaning of manholes not exceeding 2.00 Sqm & up to 1.5m depth including pumping out liquid sludge/waste materials, removing all solid materials such as stones, bricks, pipes, plastic articles etc. from the manholes/ chambers, plugging or diverting of flow if required including taking all precautionary and safety measures such as gas mask, use of safety belt and cell torch for lighting inside manholes, spreading bleaching powder on the silt removed to avoid bad smell complete all as specified and as directed by Engr-in-Charge. Note for item No 1 to 04 :- Solid contents/materials, silt etc obtained from cleaning shall be removed outside MD land and contractor's quoted rate shall be deemed to be included for this provision.

Systematically cleaning of the sewage and waste water line pipes, 100mm / 75mm dia, fixed to walls vertically, by passing ropes, Knots, bamboo/wire/kandi rotary cleaner etc., at any height including necessary scaffolding complete all as specified and as directed by Engr-in-Charge.

Systematically cleaning of the sewage lines in ground including gully traps by passing ropes, Knots, bamboo/wire/kandi rotary cleaner etc, for dia of sewage pipe150 mm complete all as specified and as directed by Engr-in-Charge.

Systematically cleaning of the sewage lines in ground including gully traps by passing ropes, Knots, bamboo/wire/kandi rotary cleaner etc, for dia of sewage pipe200 mm complete all as specified and as directed by Engr-in-Charge.

Labour only repairing/cleaning of Plumbing fittings existing of Jaquar fittings from autorised service person including repair of ,materials required during repair like wall mixer, concealed stop cock, bib taps, pillar taps , shower rose etc

Opening the Separation Cracks at the Junction of RCC and Masonry where ever directed and instructed into‘’V’’Grooves2’’ to 3’’ from the either side of the cracks by carefully marking the areas to be opened up using a Cutting machine and skillfully /carefully Chiseling with a well sharpened chisel and hammer as directed including Wire brushing and washing of concrete Substrata and masonry walls with water jet to the surfaces thus prepared to the entire satisfaction of the Engineer-in-charge

Moistening theCracks,Providing and applying priming/bonding coat of slurry made out of “PolyalkEP”and cement or equivalent as specified in the List of Brand names) in proportion1:1 to surfaces prepared as instructed and directed. Filling the Cracks/Grooves by Providing and applying “PolyalkEP” ready mix Polymer modified cement mortar (or equivalent as specified in the ListofBrandnames) in Proportionof1:5:15 (Polyalk EP : Cement : Gradedsand / quartzsand) on the prepared surfaces and finishing it in level with the existing plaster Including Hand packing, curing and making the surface similar to the external plastering using wooden floats/punch etc. complete as per specified and directed.

Supply and fix 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall complete all as specified and directed.(rate inclusive scaffolding at any height)

Supply and fix 10 mm thick toughened glass, self embossed and glazing with oil putty / beading in squares exceeding 0.5 sqm each pane fixed all as specified .

Supply and fix factory made paneled FRP door shutter , 30 mm thick with 2 mm FRP lamination top rail of size 30 x 150 mm , lock rail & bottom rail of size 30 x 150 mm with 12 mm thick panels of FRP section of box type construction as per IS 4020 core shall be polyurethane foam / high density ( more than 40 Kg per cubic meter ) cellular foam done in situ & fixed in position as per manufacturer.

Supply and fix 100mm X 63 mm size factory made FRP door frame , frame fixed with 3.Nos on either side with MS flat iron 25mmx3mm cut to size & made to shape & fixed as in hold fast after necessary tarring & sanding & fixed as per manu facture instructions & as directed. Thickness of FRP lamination shall be 2mm. Core shall be polyurethane foam/high density (more than 40kg per cubic meter) cellular foam done in situ. Sscond class wooden blocks shall be provided to hold the fittings .The size of the chowkats shall be inclusive of 2mm thick FRP lamination.

RELIEVING STRUCTURAL MEMBERS Relieving Structural members such as column, beam and slabs of their superimposed loads partially or fully by provision of adjustable steel props, frames etc. including providing necessary timber runners, bracing, jacking up arrangement all Complete to the satisfaction of Engineer in charge (Removing and redoing of brickwork, if required, shall be paid separately.

Chipping off existing loose, damaged Concrete from RCC members of all affected RCC Columns, Beams, Slabs and Chajjas on External and internal facades, etc beyond main r/f. (if required in the opinion of the Consultant), carefully with chisel and hammer Providing and applying ‘Rusticide SS’ Rust passivator or equivalent as specified in the Brand Names to existing r/f. bars Including wire brushing of reinforcement , cleaning washing of concrete etc complete as directed. Providing and applying two coats of rust preventer slurry made out of “Polyalk Fixoprime” or equivalent as specified in the Brand Names and cement in proportion 1:1.5 to existing r/f.bars as directed complete. Providing and applying bonding coat of slurry made out of “Polyalk EP” or equivalent as specified in the Brand Names and cement in proportion 1:1 to concrete and r/f substrates complete as directed Providing and applying “Polyalk EP” or equivalent as specified in the Brand Names and providing Ready mix Polymer modified cement mortar of minimum M40 grade ) to RCC members Including Hand packing, curing and making the surface rough for plastering.

Material and labour for chipping & removal of existing damaged, cracked, spalled & loose portion of concrete of the RCC members completely till the reinforcement is exposed and sound concrete (20mm to 50mm) is observed by using mechanical means and manual chisels and further the surface is jetted with clean water for removal of dust and loose particles and complete all as specified and directed. Note : Hard concrete shall not be removed by force.

Material and labour for cleaning existing reinforcement by sand blasting with suitable pump as directed by the GE and wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 approved of make on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)

Material and labour for Anticorrosive Treatment to old and new Reinforcement to Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces, complete all as specified and directed . Note:- Mode of measurement: superficial area of concrete will be measured.

Material and labour for Epoxy bond coat of approved make as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed.

Insertion of SMART CARE APCOREP CORPTAB or equivalent sustained release Corrosion inhibiting caplets which shall protect both anodic & cathodic sites and reduce Corrosion potential Eco; by minimum 80 mV in conductive medium, by drilling 25 mm holes into the concrete at a depth of 30mm and inserts to be filled by EPOXY SEAL all as directed by Engineer in charge

Material and labour aplying a coat of polymer modified compendious bonding coat on the concrete surface with one coat of styrene butadiene rubber latex emulsion (SBR latex) manufactured by M/s Fosroc chemical or equivalent chemical manufactured by Sika India India pvt Ltd/ Choksey chemicalpvt Ltd/ M/s STP/ M/s Dr Sunanada with four parts of water and six parts of cement by weight coverage of SBR latex 0.25Ltr/sqm for one coat complete all as specified and directed.

Supply and fix for wire netting of stainless steel wire 1.4 mm dia (size of mesh 25 mm ) fixed with tinned tacks of stainless steel wire staples, including necessary frame of steel all as specified and directed.

Material and labour for application of polymer modified reinstatement mortar 20mm thick in isolated places of repair works of RCC members with reinstatement mortar of approved make having a compressive strength of M40 grade complete all as specified and directed.

Material and labour Material and labour for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fix factory made SFRC (Steel Fibre Reinforced Concrete) drain cover, 100 mm thick, size not exceeding 1.5 Sqm each, with engraved marking of year of construction on the top surface of each cover, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position such as in bed for drain pipe etc complete all as directed by Engineer-in-charge

Material and labour for 75mm thick cement concrete (1:3:6) type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

Removing plant/growth including its roots up to 1.00m of plant height at any location/at any storey and of any description and treating the surfaces with Acid (HCL) and making good surfaces with cement mortar 1:4, complete all as specified and directed.

Taking down unserviceable point wiring copper or Aluminium (light, fan or Sockets) completely including making good disturbed surfaces all as directed.

Material and labour for point wiring complete as specified with 1100 V grade with 1.5 Sq mm single core PVC insulated unsheathed FRLSH cable, copper conductor multistranded passing through including PVC Casing & Capping /through existing concealed conduit as required at site, with concealed modular box suitable for logic modular switches , sockets , etc and logic modular white plates, surroundings of suitable size as required at site with PVC insulated FRLSH unsheathed stranded copper conductor of size 1.5 sq mm as earth wire connected to common earth dully as specified complete all as specified and directed for the following:- Note: - (i) Rate quoted shall include for cost of making GI Metal box and concealed in wall including cutting and sinking of boxes and making good to the walls (ii) Rate include Provision of Inner plates , Cover plates and necessary blank plates as per site requirement

All as per item No 2 above but for 5 Amp switch socket on independent board.

All as per item No 2 above but for 5 Amp switch socket on the same board.

All as per item No 2 above but for 15 Amp switch socket on independent board with 4.0 Sq mm single core PVC insulated unsheathed FRLSH cable, copper conductor multistranded with 4.0 SQ mm single core PVC insulated unsheathed FRLSH cable as earth wire connected to common earth dully complete all as directed.

Supply and fixing in replacement Switch modular type, single pole, one way, 5/6 Amp, one module, completes all as specified and directed.

Supply and fixing in replacement Switch modular type, single pole, one way, and 15/16 Amps, one module complete all as specified.

Supply and fixing in replacement socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, two module, modular type completes all as specified and directed.

Supply and fixing in replacement socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp, modular type completes all as specified and directed.

Supply and fixing in replacement Switch modular type, single pole, Bell push, 5/6 Amp, one module, completes all as specified and directed.

Supply and fixing in replacement Switch modular type, single pole, 2 way 5/6 Amp, one module, completes all as specified and directed

Supply and fix in replacement power unit 25 Amps 2 module complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement socket outlet multipurpose 3 pin, 25 Amp modular type completes all as specified and directed.

S & F in replacement modular metal flush box 2 module concealed complete with modular type cover plate 2 module for fixing power unit and sockets complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement of bell Music type AC, 230 volts, single phase complete all as specified and directed.

Supply and fixing LED luminaries 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Note: The contractor shall arrange the fitting Fixture as per the existing shape/ Size suitable for existing ceiling arrangement / if ant alteration /cutting required for fitment of fitting cost of same in also included in Qtd rate.

Supply and fixing Square / round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Note: The contractor shall arrange the fitting Fixture as per the existing shape/ Size suitable for existing ceiling arrangement / if ant alteration /cutting required for fitment of fitting cost of same in also included in Qtd rate.

Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp.

Supply and fixing LED flood light 210/200 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp.

Supply and fixing replacement post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete. Make: decorative post top- Wipro Cat Part No - LP06-351-XXX-57-XX/Havell's Cat Part No - RINKPT45WLED757PSYMTOPC / Bajaj Cat Part No - BGCPNP 45W LED WW Make for Decorative Post top : Make: Havell's Cat Part No- ECO POLE 3M TOP Ø 76 MM or equivalent model in Bajaj / National / Utkrash.

Supply and fixing LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with driver, lamp bracket of 50 mm Outer dia , bend in to required shape max up to 1.5 Mtrs length complete.

Supply and fix in repairs stepped modular electronic fan regulator 120 Watt flush type on the existing board all as directed.

Supply and fix in repairs MCB 6 to 32 A, Single pole, 240 V, C Series.

Supply and fix in repairs MCB 32 to 40 A, Single pole neutral, 240 V, C Series.

Supply and fix in repairs MCB, 4 Pole, 32 to 40 A, 415 V, C-Series.

Supply and fix in repairs MCB, 4 Pole, 63 Amps 415 V, C Series.

Supply and fix in repairs LED batten 20 watt including polycarbonate frame and connecting with flexible copper cable of suitable size from ceiling rose to LED batten, The LED fitting duly mounted on PVC block with steel screw & sleeves complete all as specified and directed.

Supply and fix in repairs LED batten 10 watt including polycarbonate frame and connecting with flexible copper cable of suitable size from ceiling rose to LED batten, The LED fitting duly mounted on PVC block with steel screw & sleeves complete all as specified and directed.

Material and labour for taking down ceiling fan1200/1400 mm sweep of any make from its existing position after disconnecting of electric connection for carrying out servicing, overhauling, greasing etc after cleaning the body internally and externally with cleaning agent and fix back to its existing location complete all as directed.

Material and labour for painting to ceiling fan of any sweep complete body, blades and down rod with two coat of synthetic enamel paint similar to match with existing colour after preparation of surfaces by using electric spray machine including complete all as specified and directed .

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, of sweep 300 mm complete

Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, of sweep 250 mm complete

Supply and fix in replacement LED bollard 9/10 Watt , IP65 protection 230 Volt , with necessary foundation and earth work for fitment of LED Bollard complete all as specified. Havell's Cat Part NO - MOUNTBL10WLED830PSYMTOPMMA or equivalent model in makes specified in Appx-B

Supply and fix cable 3 core PVC insulated unsheathed multistranded copper conductor of sie 1.5 Sq mm in replacement passing through PVC conduit from junction box to fitting complete all as directed by Engineer-in-Charge. (Note: PVC conduit is measured and paid separately)

Supply and fix cable 3 core PVC insulated unsheathed multistranded copper conductor of sie 2.5 Sq mm in replacement passing through PVC conduit from junction box to fitting complete all as directed by Engineer-in-Charge. Note: PVC conduit is measured and paid separately.

Supply and fix rigid PVC non metallic conduit 20mm dia on pole with necessary bend Elbow ,couplers ,check nuts , PVC flexible conduit for connection to junction box/ connector to External/Internal fittings , as required at site , etc in replacement complete all as directed by Engineer-in-Charge.

Item Rate BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Material and labour for Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in CM 1:6

Supply and fix extruded aluminium alloy handles, 150 mm long fabricated type anodised all as specified

Supply and fix extruded aluminium alloy handles, 100 mm long fabricated type anodised all as specified

Supply and fix alluminium, anodised, barrel tower bolts of extruded section of size 150 mm long.

Supply and fix in repairs alluminium, anodised, barrel tower bolts of extruded section of size 150 mm long.

Ditto. all as per above item but 75 mm long.

Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty / beading in squares exceeding 0.5 sqm each pane fixed all as specified .

Supply and fix 4 mm thick figured glass, pin head type and glazing with oil putty / beading in squares exceeding 0.5 sqm each pane fixed all as specified

Supply and fix 40 mm dia, cupboard knobs fixed with nut, screw and washer of aluminium anodised fixed in repairs.

S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of Frame size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and including MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge, as per specification & drawing Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

Supply and fix in repairs 140mm Floor door stopper of aluminium alloy body and tongue, anodised with hard draw steel spring complete all as specified & directed.

Supply and fix Curtain rails anodised aluminium alloy with fixing brackets, stops, rollers etc.

Supply and fix aluminum powder coated window/ventilator shutter including frame , any type (sliding or open-able ) with frame , & other similar work etc fabricated by using the aluminium section including necessary arrangement to receive 4mm thick sheet glass or wire mesh with aluminium channel beading, stainless steel screws, rollers, maruti lock & F frame including the cost of rubber gasket / rubber beading rollers, maruti lock & F frame etc complete . But the weight of the rubber gasket / beading rollers, maruti lock will not be measured with weight of aluminium shutter Note :- Sheet glass & wire mesh shall be measured & paid separately

Taking down cement plaster of stone /Pvc block /brick wall / top of chajja, or concrete surface of any description including raking out joints hacking for key securing down with water etc and removal of debris to outside of INS Mandovi Area including filling of open joints in cement mortar 1:6 Complete

Material and labour for Rendering 15 mm thick (10+5) cement plaster in ready mix cement mortar 1:4 of approved make on brick masonry surfaces or surface other than fair face of brickwork with WPC as per manufacturer instruction and finished surface even and smooth without using extra cement complete all as specified and directed Note: Waterproofing will not be measured separately

Material and labour preparation of new surface of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ ltr and UV resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/ 10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm over new surface.

Material and labour for Dubbing out average 15mm thick in ready mix CM 1:6 of approved make on irregular face of walls (when specifically rendered in writing)

Material and labour for rendering 10 mm thick in ready mix cement mortar 1:6 of approved make on fair faces of brick work or concrete surfaces finish even & smooth with using extra cement

Material and labour for preparation of newly plastered surfaces of wall preparatory to distempering, Priming plastered and other surfaces with alkali resistant priming paint, Providing and applying plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth & distempering walls with two coats of distemper oil emulsion, white or tinted

Material and labour, 5 mm thick plastering in ready mix cement mortar 1:3 of approved make finished even and smooth without using extra cement on soffit of chajja and roof projection or other similar work

Material and labour for preparation of newly plastered surfaces of ceiling preparatory to distempering, Priming plastered and other surfaces with alkali resistant priming paint, Providing and applying plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth & distempering walls with two coats of distemper oil emulsion, white or tinted

Washing rubbing down and stopping of distempered surfaces any type of wall including preparation and making smooth surface by applying ready mix putty where required then apply two coats of distemper oil emulsion of any tint specified by Engineer -in-Charge

Washing rubbing down and stopping of distempered surfaces any type of wall including preparation and making smooth surface by applying ready mix putty where required then apply two coats of distemper Plastic emulsion of any tint specified by Engineer -in-Charge

Material and labour for Washing, rubbing down and stopping of old painted surfaces of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ ltr and UV resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/ 10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm over old surface

Providing and injection grouting low viscosity (3-5 cps) high molecular weight monomer APCOREP INJECTION GROUT LV or equivalent into concrete by injection grouting at 150-300 mm centre to centre through nylon nipples of 12 mm dia fixed into drilled holes at 3-5 kg /cm2 pressure and having tensile strength of I 0-15 N/mm2 (ASTM-D-638-95) & flexure of 20-25 N/mm2 (ASTM-D-790- 96). Drilling holes and fixing of nozzles paid separately

Injecting low viscosity (3-5 cps) high molecular weight by pressure and using mechanized injector gun with accessories, till nozzles refuses to accept the grout, Including, Mixing of materials( Mixing material components (part a & b) in required quantities as per manufacturer’s instruction by weigh batching) and Grouting ( Filling the grouting gun with monomer. Maintain desired pressure in the gun by air compressor; maintain the pressure at exit (4 to 5 Kg/ Cm2) by monitoring pressure gauge at exit. Grouting the material through prefixed nozzles in the structural elements till its refusal. Sealing the nozzle with epoxy putty after the refusal. Monitoring leakages through other nozzles while grouting and seal them as per the requirement. Repeat the process for all the nozzles. the operation to be within pot life of the material.)and Cleaning of gun and accessories ( the gun and accessories like valves, pipes and other fixtures to be cleaned with thinner after the operation to avoid jamming of the gun.) etc. complete.

Material and labour TMT bars 10 mm cut to length bent to shape required including cranking and binding with MS wire n less than 0.9 mm dia but for stiffener of chain link fencing

Demolition of cement concrete of any description in any position not otherwise specifically provided for

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

Material and labour Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Supply and fix Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 Gde E-165 ®

Disconnecting existing water tanks exc. 500 ltr n. exc. 1000 ltr, setting aside for repairs, cleaning etc. with all fittings & pipes and hoisting if required reconnecting and re-fixing in position.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Material and labour Screed bed or bedding layer of mortar 15 mm thick 1:6 for laying floor finishes

Material and labour Rendering 10 mm thick cement plaster in ready mix cement mortar 1:4 on Vertical Surface

Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations,

Glazed ceramic coloured tiles in vertical surface 350 x250x 7 mm/ 450x 350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match

Taking down steel tubing and connections 15 mm bore

Taking down steel tubing and connections 20 mm bore

Dismantling water tanks and removing to store exe 500 Ltr & n exe 1000 Ltr

Supply and fix of CPVC 20mm pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply and fix of CPVC 25mm pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply and fix bib taps (long body) , cast copper alloy with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule & fixed . Size 15mm fixed in repair

Supply and fix bib cock with wall flange , cast copper alloy with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule & fixed . Size 15mm fixed in repair Make Jaquar (OPP-CHR-15037PM)or equivalent model in KOHLER, CERA, HINDWARE, GROHE

Supply and fix pillar cock auto closing system , cast copper alloy with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule & fixed . Size 15mm fixed in repair Make Jaquar (PRS-CHR-709) or equivalent model in KOHLER, CERA, HINDWARE, GROHE

Supply and fix PTMT bathroom mirror cabinet of Size 600mm x 450mm x 200mm with all necessary arrangements for fixing to wall

Supply and fix Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device(colour : white )

Supply and fix Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed."

Supply and fix in repairs brass chromium plated tubular towel rail 20mm dia including all necessary fittings complete all as specified

Supply and fix in repairs grating doom 100mm dia of PTMT (Minimum weight 40 gms) including jointing with solvent cement

Supply and fix 32mm Waste pipe 800mm long in repairs

Supply and fix 2 in 1 Health Faucet with 8MM dia 1 Mtr long flexible tube and wall hook (Chrome Plated) Make : Make Jaquar (ALD-CHR-573) or equivalent model in KOHLER, CERA, HINDWARE, GROHE

Supply and fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) ( excluding flushing cistern and flush pipe ) fixed in repairs

Supply 10 litres Capacity PVC valveless,syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including bracketSupply and fixlush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern & fixing High or low level flushing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any

Supply and fix PVC Connection of size 15 mm ,450 mm long with PTMT nuts complete all as specified

Supply and fix PVC Connection of size 15 mm ,600 mm long with PTMT nuts complete all as specified

Supply and fix Wash basins, Vitreous China (flat back or angle back type) 550mmx400mm size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe fixed in repairSupply and fixlush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern

Supply and fix sinks with drainage board made of stainless steel 1 mm thick kitchen with plug ,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm bowl size 410mm x 330mm x160mm

Supply and fix 500 Litre Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Supply and fix 1000 Litre Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Supply and fix Ball valves 25mm bore dia high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed in repairs . (Minimum weight 15mm-142gms/ 2 0 m - 2 1 0 g m s . /25mm-455gms/ 40mm- 690 gms)

Supply and fix 25 mm bore CPVC BALL VALVE

Supply and fix 25 mm CPVC Tank Adaptor

Material and labour for 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed in repairs

Taking down eaves gutters, sewage lines and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

Supply and fix 160 mm Ø PVC (SWR) pipe with single socketed in any length solvent cement jointed fixed to wall/column

S& F PVC (SWR) bends any radius 160 mm bore with access door

Supply and fix 110 mm Ø PVC (SWR) pipe with single socketed in any length solvent cement jointed fixed to wall/column

S& F PVC (SWR) bends any radius 110 mm bore with access door

Dismantling boarding, any description, fixed in any position with Screws

Supply and fix Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm all as specified including 12mm Fibre insulation boards, ordinary type,. and fixed with Hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Dismantling structural steel work in cladding doors, gates but excluding framed truss etc

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

Material and labour for cleaning of manholes not exceeding 2.00 Sqm & up to 1.5m depth including pumping out liquid sludge/waste materials, removing all solid materials such as stones, bricks, pipes, plastic articles etc. from the manholes/ chambers, plugging or diverting of flow if required including taking all precautionary and safety measures such as gas mask, use of safety belt and cell torch for lighting inside manholes, spreading bleaching powder on the silt removed to avoid bad smell complete all as specified and as directed by Engr-in-Charge. Note for item No 1 to 04 :- Solid contents/materials, silt etc obtained from cleaning shall be removed outside MD land and contractor's quoted rate shall be deemed to be included for this provision.

Systematically cleaning of the sewage and waste water line pipes, 100mm / 75mm dia, fixed to walls vertically, by passing ropes, Knots, bamboo/wire/kandi rotary cleaner etc., at any height including necessary scaffolding complete all as specified and as directed by Engr-in-Charge.

Systematically cleaning of the sewage lines in ground including gully traps by passing ropes, Knots, bamboo/wire/kandi rotary cleaner etc, for dia of sewage pipe150 mm complete all as specified and as directed by Engr-in-Charge.

Systematically cleaning of the sewage lines in ground including gully traps by passing ropes, Knots, bamboo/wire/kandi rotary cleaner etc, for dia of sewage pipe200 mm complete all as specified and as directed by Engr-in-Charge.

Labour only repairing/cleaning of Plumbing fittings existing of Jaquar fittings from autorised service person including repair of ,materials required during repair like wall mixer, concealed stop cock, bib taps, pillar taps , shower rose etc

Opening the Separation Cracks at the Junction of RCC and Masonry where ever directed and instructed into‘’V’’Grooves2’’ to 3’’ from the either side of the cracks by carefully marking the areas to be opened up using a Cutting machine and skillfully /carefully Chiseling with a well sharpened chisel and hammer as directed including Wire brushing and washing of concrete Substrata and masonry walls with water jet to the surfaces thus prepared to the entire satisfaction of the Engineer-in-charge

Moistening theCracks,Providing and applying priming/bonding coat of slurry made out of “PolyalkEP”and cement or equivalent as specified in the List of Brand names) in proportion1:1 to surfaces prepared as instructed and directed. Filling the Cracks/Grooves by Providing and applying “PolyalkEP” ready mix Polymer modified cement mortar (or equivalent as specified in the ListofBrandnames) in Proportionof1:5:15 (Polyalk EP : Cement : Gradedsand / quartzsand) on the prepared surfaces and finishing it in level with the existing plaster Including Hand packing, curing and making the surface similar to the external plastering using wooden floats/punch etc. complete as per specified and directed.

Supply and fix 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall complete all as specified and directed.(rate inclusive scaffolding at any height)

Supply and fix 10 mm thick toughened glass, self embossed and glazing with oil putty / beading in squares exceeding 0.5 sqm each pane fixed all as specified .

Supply and fix factory made paneled FRP door shutter , 30 mm thick with 2 mm FRP lamination top rail of size 30 x 150 mm , lock rail & bottom rail of size 30 x 150 mm with 12 mm thick panels of FRP section of box type construction as per IS 4020 core shall be polyurethane foam / high density ( more than 40 Kg per cubic meter ) cellular foam done in situ & fixed in position as per manufacturer.

Supply and fix 100mm X 63 mm size factory made FRP door frame , frame fixed with 3.Nos on either side with MS flat iron 25mmx3mm cut to size & made to shape & fixed as in hold fast after necessary tarring & sanding & fixed as per manu facture instructions & as directed. Thickness of FRP lamination shall be 2mm. Core shall be polyurethane foam/high density (more than 40kg per cubic meter) cellular foam done in situ. Sscond class wooden blocks shall be provided to hold the fittings .The size of the chowkats shall be inclusive of 2mm thick FRP lamination.

RELIEVING STRUCTURAL MEMBERS Relieving Structural members such as column, beam and slabs of their superimposed loads partially or fully by provision of adjustable steel props, frames etc. including providing necessary timber runners, bracing, jacking up arrangement all Complete to the satisfaction of Engineer in charge (Removing and redoing of brickwork, if required, shall be paid separately.

Chipping off existing loose, damaged Concrete from RCC members of all affected RCC Columns, Beams, Slabs and Chajjas on External and internal facades, etc beyond main r/f. (if required in the opinion of the Consultant), carefully with chisel and hammer Providing and applying ‘Rusticide SS’ Rust passivator or equivalent as specified in the Brand Names to existing r/f. bars Including wire brushing of reinforcement , cleaning washing of concrete etc complete as directed. Providing and applying two coats of rust preventer slurry made out of “Polyalk Fixoprime” or equivalent as specified in the Brand Names and cement in proportion 1:1.5 to existing r/f.bars as directed complete. Providing and applying bonding coat of slurry made out of “Polyalk EP” or equivalent as specified in the Brand Names and cement in proportion 1:1 to concrete and r/f substrates complete as directed Providing and applying “Polyalk EP” or equivalent as specified in the Brand Names and providing Ready mix Polymer modified cement mortar of minimum M40 grade ) to RCC members Including Hand packing, curing and making the surface rough for plastering.

Material and labour for chipping & removal of existing damaged, cracked, spalled & loose portion of concrete of the RCC members completely till the reinforcement is exposed and sound concrete (20mm to 50mm) is observed by using mechanical means and manual chisels and further the surface is jetted with clean water for removal of dust and loose particles and complete all as specified and directed. Note : Hard concrete shall not be removed by force.

Material and labour for cleaning existing reinforcement by sand blasting with suitable pump as directed by the GE and wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 approved of make on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)

Material and labour for Anticorrosive Treatment to old and new Reinforcement to Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces, complete all as specified and directed . Note:- Mode of measurement: superficial area of concrete will be measured.

Material and labour for Epoxy bond coat of approved make as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed.

Insertion of SMART CARE APCOREP CORPTAB or equivalent sustained release Corrosion inhibiting caplets which shall protect both anodic & cathodic sites and reduce Corrosion potential Eco; by minimum 80 mV in conductive medium, by drilling 25 mm holes into the concrete at a depth of 30mm and inserts to be filled by EPOXY SEAL all as directed by Engineer in charge

Material and labour aplying a coat of polymer modified compendious bonding coat on the concrete surface with one coat of styrene butadiene rubber latex emulsion (SBR latex) manufactured by M/s Fosroc chemical or equivalent chemical manufactured by Sika India India pvt Ltd/ Choksey chemicalpvt Ltd/ M/s STP/ M/s Dr Sunanada with four parts of water and six parts of cement by weight coverage of SBR latex 0.25Ltr/sqm for one coat complete all as specified and directed.

Supply and fix for wire netting of stainless steel wire 1.4 mm dia (size of mesh 25 mm ) fixed with tinned tacks of stainless steel wire staples, including necessary frame of steel all as specified and directed.

Material and labour for application of polymer modified reinstatement mortar 20mm thick in isolated places of repair works of RCC members with reinstatement mortar of approved make having a compressive strength of M40 grade complete all as specified and directed.

Material and labour Material and labour for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fix factory made SFRC (Steel Fibre Reinforced Concrete) drain cover, 100 mm thick, size not exceeding 1.5 Sqm each, with engraved marking of year of construction on the top surface of each cover, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position such as in bed for drain pipe etc complete all as directed by Engineer-in-charge

Material and labour for 75mm thick cement concrete (1:3:6) type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

Removing plant/growth including its roots up to 1.00m of plant height at any location/at any storey and of any description and treating the surfaces with Acid (HCL) and making good surfaces with cement mortar 1:4, complete all as specified and directed.

Taking down unserviceable point wiring copper or Aluminium (light, fan or Sockets) completely including making good disturbed surfaces all as directed.

Material and labour for point wiring complete as specified with 1100 V grade with 1.5 Sq mm single core PVC insulated unsheathed FRLSH cable, copper conductor multistranded passing through including PVC Casing & Capping /through existing concealed conduit as required at site, with concealed modular box suitable for logic modular switches , sockets , etc and logic modular white plates, surroundings of suitable size as required at site with PVC insulated FRLSH unsheathed stranded copper conductor of size 1.5 sq mm as earth wire connected to common earth dully as specified complete all as specified and directed for the following:- Note: - (i) Rate quoted shall include for cost of making GI Metal box and concealed in wall including cutting and sinking of boxes and making good to the walls (ii) Rate include Provision of Inner plates , Cover plates and necessary blank plates as per site requirement

All as per item No 2 above but for 5 Amp switch socket on independent board.

All as per item No 2 above but for 5 Amp switch socket on the same board.

All as per item No 2 above but for 15 Amp switch socket on independent board with 4.0 Sq mm single core PVC insulated unsheathed FRLSH cable, copper conductor multistranded with 4.0 SQ mm single core PVC insulated unsheathed FRLSH cable as earth wire connected to common earth dully complete all as directed.

Supply and fixing in replacement Switch modular type, single pole, one way, 5/6 Amp, one module, completes all as specified and directed.

Supply and fixing in replacement Switch modular type, single pole, one way, and 15/16 Amps, one module complete all as specified.

Supply and fixing in replacement socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, two module, modular type completes all as specified and directed.

Supply and fixing in replacement socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp, modular type completes all as specified and directed.

Supply and fixing in replacement Switch modular type, single pole, Bell push, 5/6 Amp, one module, completes all as specified and directed.

Supply and fixing in replacement Switch modular type, single pole, 2 way 5/6 Amp, one module, completes all as specified and directed

Supply and fix in replacement power unit 25 Amps 2 module complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement socket outlet multipurpose 3 pin, 25 Amp modular type completes all as specified and directed.

S & F in replacement modular metal flush box 2 module concealed complete with modular type cover plate 2 module for fixing power unit and sockets complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement of bell Music type AC, 230 volts, single phase complete all as specified and directed.

Supply and fixing LED luminaries 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Note: The contractor shall arrange the fitting Fixture as per the existing shape/ Size suitable for existing ceiling arrangement / if ant alteration /cutting required for fitment of fitting cost of same in also included in Qtd rate.

Supply and fixing Square / round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Note: The contractor shall arrange the fitting Fixture as per the existing shape/ Size suitable for existing ceiling arrangement / if ant alteration /cutting required for fitment of fitting cost of same in also included in Qtd rate.

Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp.

Supply and fixing LED flood light 210/200 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp.

Supply and fixing replacement post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete. Make: decorative post top- Wipro Cat Part No - LP06-351-XXX-57-XX/Havell's Cat Part No - RINKPT45WLED757PSYMTOPC / Bajaj Cat Part No - BGCPNP 45W LED WW Make for Decorative Post top : Make: Havell's Cat Part No- ECO POLE 3M TOP Ø 76 MM or equivalent model in Bajaj / National / Utkrash.

Supply and fixing LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with driver, lamp bracket of 50 mm Outer dia , bend in to required shape max up to 1.5 Mtrs length complete.

Supply and fix in repairs stepped modular electronic fan regulator 120 Watt flush type on the existing board all as directed.

Supply and fix in repairs MCB 6 to 32 A, Single pole, 240 V, C Series.

Supply and fix in repairs MCB 32 to 40 A, Single pole neutral, 240 V, C Series.

Supply and fix in repairs MCB, 4 Pole, 32 to 40 A, 415 V, C-Series.

Supply and fix in repairs MCB, 4 Pole, 63 Amps 415 V, C Series.

Supply and fix in repairs LED batten 20 watt including polycarbonate frame and connecting with flexible copper cable of suitable size from ceiling rose to LED batten, The LED fitting duly mounted on PVC block with steel screw & sleeves complete all as specified and directed.

Supply and fix in repairs LED batten 10 watt including polycarbonate frame and connecting with flexible copper cable of suitable size from ceiling rose to LED batten, The LED fitting duly mounted on PVC block with steel screw & sleeves complete all as specified and directed.

Material and labour for taking down ceiling fan1200/1400 mm sweep of any make from its existing position after disconnecting of electric connection for carrying out servicing, overhauling, greasing etc after cleaning the body internally and externally with cleaning agent and fix back to its existing location complete all as directed.

Material and labour for painting to ceiling fan of any sweep complete body, blades and down rod with two coat of synthetic enamel paint similar to match with existing colour after preparation of surfaces by using electric spray machine including complete all as specified and directed .

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, of sweep 300 mm complete

Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, of sweep 250 mm complete

Supply and fix in replacement LED bollard 9/10 Watt , IP65 protection 230 Volt , with necessary foundation and earth work for fitment of LED Bollard complete all as specified. Havell's Cat Part NO - MOUNTBL10WLED830PSYMTOPMMA or equivalent model in makes specified in Appx-B

Supply and fix cable 3 core PVC insulated unsheathed multistranded copper conductor of sie 1.5 Sq mm in replacement passing through PVC conduit from junction box to fitting complete all as directed by Engineer-in-Charge. (Note: PVC conduit is measured and paid separately)

Supply and fix cable 3 core PVC insulated unsheathed multistranded copper conductor of sie 2.5 Sq mm in replacement passing through PVC conduit from junction box to fitting complete all as directed by Engineer-in-Charge. Note: PVC conduit is measured and paid separately.

Supply and fix rigid PVC non metallic conduit 20mm dia on pole with necessary bend Elbow ,couplers ,check nuts , PVC flexible conduit for connection to junction box/ connector to External/Internal fittings , as required at site , etc in replacement complete all as directed by Engineer-in-Charge.