Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
Tender Value
₹2.6 L
EMD Value
₹5,286
Closing Date
18 Aug 2020, 3:00 pmClosed
Executive Engineer Elect
Executive Engineer Elect BSNL Electrical Division II WMS Compound 47th Cross, 9th Main, 5th Block, Jayanagar Bengaluru
Repairs to Main pumps Rewinding Street Light fittings at WMS Compound Jayanagar Bengaluru
2020_BSNL_53710_1
14/2020-2021/BSNL/ ED-II/ BGL
Open Tender
Electrical Works
Item Rate
30 days
WMS Compound Jayanagar
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Accounts Officer (Cash) HQ BSNL BGTD
₹5,286
31 Aug 2020
24 Jul 2020
20 Aug 2020
24 Jul 2020
18 Aug 2020
24 Jul 2020
24 Jul 2020 - 18 Aug 2020
Amount
WMS Electrical Mtce
Servicing & repair of faulty 25HP, 3ph monoblock centrifugal type pump set including replacement of 1 Set Impeller, 2No bearings, 1No gunmetal bush, 2No oil seal, 2 set of gland packing, 1set gasket, greasing of moving parts, lathe turning works, Replacement of rusted Bolts and Nuts, dismantling and re-installation, transportation of pumpset to workshop & back to site, installation of spare existing pump for lifting water till the completion of servicing work as per the instructions of Engineer inchargre and the agency should carry out the work without disturbing existing water supply arrangement as reqd.
Servicing & repair of faulty 25HP, 3ph monoblock centrifugal type pump set including replacement of 2No bearings, 1No gunmetal bush, 2No oil seal, 2 set of gland packing, 1set gasket, greasing of moving parts, lathe turning works, Replacement of rusted Bolts and Nuts, dismantling and re-installation, transportation of pumpset to workshop & back to site, installation of spare existing pump for lifting water till the completion of servicing work as per the instructions of Engineer Inchargre and the agency should carryout the work without disturbing existing water supply arrangement as reqd
Servicing & repair of faulty 25HP, 3ph monoblock centrifugal type pump set including replacement of burnt winding, 1 Set Impeller, 2No bearings, 1No gunmetal bush, 2No oil seal, 2 set of gland packing, 1set gasket, greasing of moving parts, lathe turning works, Replacement of rusted Bolts and Nuts, dismantling and re-installation, transportation of pumpset to workshop & back to site, installation of spare existing pump for lifting water till the completion of servicing work as per the instructions of Engineer Inchargre and the agency should carryout the work without disturbing existing water supply arrangement as reqd
Supplying and Fixing of 100mm Dia Brass Foot Valve i/c dismantling the suction pipe, taking out the same from sump, changing the rusted and damaged cast iron foot Valve, lowering the suction pipe, assembling, checking for leakages etc as reqd.
Supplying and Laying of 3½ x 95 Sqmm size PVC insulated PVC sheathed, Alu. Condr. UG cable of 1.1KV grade as per Dept Specification In Hard/ Soft soil i/c excavation laying cable, refilling the trench etc as reqd. (Make: Polycab, Havells or Superior make)
Supplying and Laying of 2 Core 16 Sqmm size PVC insulated PVC sheathed, Alu. Condr. UG cable of 1.1KV grade as per Dept Specification In Hard/ Soft soil i/c excavation laying cable, refilling the trench etc as reqd. (Make: Polycab, Havells or Superior make)
Supplying and Laying of 2 Core 6 Sqmm size PVC insulated PVC sheathed, Alu. Condr. UG cable of 1.1KV grade as per Dept Specification In Hard/ Soft soil i/c excavation laying cable, refilling the trench etc as reqd. (Make: Polycab, Havells or Superior make)
Supplying and Laying of 3½ x 95 Sqmm size PVC insulated PVC sheathed, Alu. Condr. UG cable of 1.1KV grade as per Dept Specification In existing pipe/ surface of wall/pole etc as reqd. (Make: Polycab, Havells or Superior make)
Supplying and Laying of 2 Core 16 Sqmm size PVC insulated PVC sheathed, Alu. Condr. UG cable of 1.1KV grade as per Dept Specification In existing pipe/ surface of wall/pole etc as reqd. (Make: Polycab, Havells or Superior make)
Supplying and Laying of 2 Core 6 Sqmm size PVC insulated PVC sheathed, Alu. Condr. UG cable of 1.1KV grade as per Dept Specification In existing pipe/ surface of wall/pole etc as reqd. (Make: Polycab, Havells or Superior make)
Supply & Making end termination suitable for 3½ x 95 Sqmm size aluminium conductor cable with brass compression gland etc., as reqd.
Supply & Making end termination suitable for 2core 16 sqmm size aluminium conductor cable with brass compression gland etc., as reqd.
Supply & Making end termination suitable for 2core 6 sqmm size aluminium conductor cable with brass compression gland etc., as reqd.
Supply & Laying of 40mm outer dia HDPE PVC pipe with accessories in the following manner as per dept Spec in Hard/ Soft soil i/c excavation laying Pipe, refilling the trench and making good the damages etc as reqd.
Supply & Laying of 40mm outer dia HDPE PVC pipe with accessories in the following manner as per dept Spec On surface of wall/ pole i/c clamping and making good the damages etc as reqd.
Supply & Fixing of weather proof box made of SMC/Poly vinyl with 1No 6Amp SPMCB, din channel, connector of size about 150mm x 200mmx100mm deep I/c fixing arrangements, locking hinges, connections etc as reqd [M/s Syntax or similar approved make]
Construction of brick work cement concrete pedestal to street light poles of size approx. 1.5ftx1.5ftx2.0ft depth including removing of broken damaged concrete/ Brick Masonary, plastering and color washing etc as required
Supplying and making 2 x 6 up to 25 Sqmm straight through cable joint with cast resin compound including ferrules and other joining materials for PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required
Cutting the cement concrete Road of 150mm depth x 200mm width for laying of UG cable and Providing 1:2:4 cement concrete i/c making good the damages etc as reqd.
Supplying and fixing 16SWG MS sheet to cover the openings in the existing outdoor feeder pillars to avoid damages and entry of rodents, including painting to match with existing panels etc as required.
Supplying and laying of 2 Core 1.5 Sqmm copper cable from control box to the light fitting on street light pole i/c making connection etc as required.
Repairs to 12 / 16 Watts Tubular LED Lamp in existing street light fittings/ LED Lamps, rectification of faults i/c checking for faults, replacement of drivers, LEDs, wiring interconnection complete etc as reqd.
Repairs to 20 Watts Box Type LED Lamp existing street light fittings/ LED Lamps, rectification of faults i/c checking for faults, replacement of drivers, LEDs, wiring interconnection complete etc as reqd.
Repairs to 28 Watts LED Fitting existing street light fittings/ LED Lamps, rectification of faults i/c checking for faults, replacement of drivers, LEDs, wiring interconnection complete etc as reqd.(Make: Crompton Greaves)
Rectification of fault in the existing 3 Phase Electronic DOL starter of GELCO make in MSEA Bldg water pump i/c replacement of Contactor coil, servicing & interconnection wiring complete etc as reqd.
Cutting and removing the plants and weeds grown / dumped all around outdoor BESCOM meter boards/ feeder pillars to make ease to BESCOM people to take monthly energy meter readings and to avoid possible entry of rodents etc as reqd
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .