Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAdmitted-Finance | ₹3.6 L | L1 | Admitted-Finance |
| 2 | L2₹3.6 LAdmitted-Finance GSTIN: 07BVPPS1030K1ZB | ₹3.6 L | L2 | Admitted-Finance |
| 3 | Rejected-Technical GSTIN: 07AEAPY8825K1ZV | - | - | Rejected-Technical Due to not full fill the term and condition of NIT |
| Sl No | Description | Qty | Unit | NAUNIDH ENTERPRISES L2 | SMJ Electrical Private Limited L1 |
|---|---|---|---|---|---|
| 1.01 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil (DSR - 2.1.1) | 40 | SQM | 4,400 ₹4,400 | 4,400 ₹4,400 |
| 1.02 | Hire and running charges of crane 20 tonne capacity (DSR - 0028) for shifting and stacking of old materials. | 1 | shift | 8,820 ₹8,820 | 8,800 ₹8,800 |
| 1.03 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR - 4.1.3) | 8 | CUM | 53,200 ₹53,200 | 52,800 ₹52,800 |
| 1.04 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (DSR - 10.25.2) | 1,230 | KG | 1,79,580 ₹1.8 L | 1,78,350 ₹1.8 L |
| 1.05 | Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces (DSR- 10.5.1) | 2 | SQM | 9,800 ₹9,800 | 9,700 ₹9,700 |
| 1.06 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR - 12.50) | 172 | SQM | 1,07,500 ₹1.1 L | 1,06,640 ₹1.1 L |
Tender Value
Refer Docs
EMD Value
₹8,600
Closing Date
5 Feb 2026, 3:00 pmClosed
EXECUTIVE ENGINEER (SDW) II
S.T.P. OKHLA MATHURA ROAD NEW DELHI-110025
Providing/Fabricating/Fixing of MS Shed at Batla House SPS.
2026_DJB_285892_6
NIT No-10 EE (SDW) II/ (25-26)
Open Tender
Electrical Works
45 days
S.T.P. OKHLA MATHURA ROAD NEW DELHI
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
A/c.50448339804
₹8,600
19 Feb 2026
30 Jan 2026
5 Feb 2026
30 Jan 2026
5 Feb 2026
30 Jan 2026
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil (DSR - 2.1.1)
Hire and running charges of crane 20 tonne capacity (DSR - 0028) for shifting and stacking of old materials.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR - 4.1.3)
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (DSR - 10.25.2)
Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces (DSR- 10.5.1)
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR - 12.50)
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
BOQ_378412.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid