752765 ADDN ALTN CUM SPL REPAIRS TO OFFRS JCO OR MD ACCN AT CMM AND JCO OR MD ACCN AT MANDIR COLONY ANANT NAGER AND AMN SUB DEPOT LINE IN COD ESTATE JABALPUR UNDER GE EAST JABALPUR

Amount

SCHEDULE "A" :

Item No 01:- Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

Item No 2 :- Dismantling floor, walls, roof tiles including bedding but not backing and rubbish off permises all as specified.

Item No 3 :- Demolition of reinforcement cement concrete above ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc

Item No 04 : Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand ) to match the existing floors complete.

Item No 05 : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

Item No 06 : M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Item No 07 : M&L for 9 to 10 mm thick Light shade vitrified ceramic tiles, double charged in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Item No 08 - M&L for 9 to 10 mm thick Dark shade vitrified ceramic tiles, double charged in skirting, exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Item No 09 : - M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match complete.

Item No 10 :- M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm & not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match complete.

Item No 11 :- M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm, & not exceeding 0.38 sqm in vertical surface such as skirtings, dados etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match complete.

Item No 12 : M&L for 15 mm thick screed bed or bedding layer in CM 1:6 surface finished fair and even for laying floor finishes complete all as specified and directed.

Item No 13 : M&L for 20 mm thick screed bed or bedding layer in CM 1:6 surface finished fair and even for laying floor finishes complete all as specified and directed.

Item No. 14 - M&L Machine cut Kota stone slab flooring 20-25mm thick as in floor, over cement mortar laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab of the slab incl rubbing, polishing & rounding to edges/bull nosed complete

Item No. 15 - M&L Machine cut Kota stone slab flooring 20-25mm thick as in riser, steps & skirting, over cement mortar laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab of the slab incl rubbing, polishing & rounding to edges/bull nosed complete incl 10mm thick plaster in CM 1:4.

Item No. 16 :- M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment (ii) Rendering shall be measured and paid separately under respective items.

Item No. 17 :- M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick or concrete surface finished rough complete all as specified and directed.

Item No. 18 :- M&L for robber moulded glossy finish coloured chequered cement concrete tiles 30 cm x 30 cm x 22 to 25 mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and pigments complete all as specified and directed.

Item No. 19 :- Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Item No. 20 :- M&L Flyash Brick work using modular bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Item No. 21 :- M&L Flyash Brick work in half brick wall using modular bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Item No. 22 :- M&L Flyash Brick work using modular bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 including flush pointing on external faces with the same mortar while the work in progress, complete all as specified and directed.

Item No. 23 :- Ditto all as per item No 22 above but except brick, complete all as specified and directed.

Item No 24:- M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Item No 25 :- M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction. 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand (all by weight) complete.

Item No 26 : M&L for cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in hold fast etc and similar work including necessary form work and , complete all as specified and directed.

Item No 27 : M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, chhajja, shelves etc and similar work including necessary form work and set in CM 1:4 complete all as specified and directed.

Item No 28 : M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab and similar work including necessary form work and set in CM 1:6 complete all as specified and directed.

Item No 29 :.Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Item No 30 : M&L for rendering on fair faces of brick work or concrete surface of wall 10 mm thick in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed

Item No 31 : M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat mixed with WPC and 2nd layer 5mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml /50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

Item No 32 : M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed.

Item No 33 :- Supply only liquid water proofing compound, ISI marked.

Item No 34 :- Taking down chowkats or frames not exc 1.5 Sqm each with shutters ( with out taking off shutters from the frames) incl making good the disturbed portion complete all as specified and directed.

Item No 35 :- Taking down chowkats or frames exc 1.5 sqm but not exc 4.0 Sqm each with shutters ( with out taking off shutters from the frames) incl making good the disturbed portion complete all as specified and directed.

Item No 36 : Taking down shutter of any description n exc 1 sqm each and removing from site.

Item No 37 : M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves,lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good in brick walls, cutting not exceeding 10 cm girth complete all as specified and directed.

Item No 38 : M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves,lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good in brick walls, cutting exceeding 10 cm but n exc 20 cm girth complete all as specified and directed.

Item No 39 : S&F 35 mm thick 2nd class hardwood factory made glazed and skeleton shutters, for window open rebated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed.

Item No. 40 :- S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Item No. 41 :- S&F Factory made precoated steel window and vents (Box Section) with fly proof and guard bars as per HQ CEJZ Drg No CEJZ/TD/980 of sh 1/2 & 2/2 with and including all precoated fittings and 4 mm thick glass pan and stainless steel wiremesh, complete all as specified and directed.

Item No. 42 :- S&F pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of priming complete all as specified and directed.

Item No. 43 :- S&F pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of priming complete all as specified and directed.

Item No 44 : M&L for cement concrete 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in back filling etc and similar work including necessary form work and , complete all as specified and directed.

Item No. 45 :- S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0

Item No. 46 :- M&L Second class hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Item No. 47 : S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2020 Part-II complete all as specified and directed

Item No. 48 :- S&F Factory made solid PVC Moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face,with particle board core supplying and fixing in the frame as shown on drawing in section 8 of SSR-2020 Part-II complete all as specified and directed.

Item No. 49 :- S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2020 Part-II complete all as specified and directed.

Item No. 50 :- M&L butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 for 100 mm long complete all as specified and directed.

Item No. 51 :- S&F Butt hinges, medium weight, cold rolled mild steel 100 mm long complete all as specified and directed.

Item No. 52 :- S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300 mm length of bolt dia 16 mm complete all as specified and directed.

Item No. 53 :- S&F 150 mm long ordinary helical door spring incl roller and roller plate complete.

Item No. 54 :- S&F aluminium, anodised, barrel tower bolts of extruded section 200 mm long dia of 12mm complete all as specified and directed.

Item No. 55 :- S&F aluminium, anodised, barrel tower bolts of extruded section 150 mm long dia of 12mm complete all as specified and directed.

Item No. 56 :- S&F aluminium, anodised, barrel tower bolts of extruded section 100 mm long dia of 10 mm complete all as specified and directed.

Item No. 57 :- S&F extruded aluminium alloy handles fabricated type anodised of 150 mm size complete all as specified and directed

Item No. 58 :- S&F extruded aluminium alloy handles fabricated type anodised of 100 mm size complete all as specified and directed

Item No. 59 :- S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm complete all as specified and directed.

Item No. 60 :- S&F small fitings of 2nd class hard wood door, window stops and the like not exc 200 cucm each including MS butt hinges, medium weight, cold rolled 50mm long all as specified and directed.

Item No. 61 :- S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Item No. 62 :- S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/wooden beads complete all as specified.

Item No. 63 :- Taking down old wooden/wood based particle board & S&F 18/19 mm thick high density PVC solid fibre board duly laminated 2mm thick prelaminated PVC sheet on front face (ISI mark) etc in kitchen cupboard/ or in any position etc.

Item No. 64 :- S&F 100 mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Item No. 65 :- S&F Modular kitchen trolley of any size & pattern made out of stainless steel wire / sheet of SS304, complete all as specified and directed.

Item No. 66 :- S&F heavy duty casement type sliding channel for kitchen shutter upto 600 mm depth of stainless steel, complete all as specified and directed.

Item No. 67 :- S&F self closing shutter hinges (Ebco) of MS body, complete all as specified and directed.

Item No. 68 :- S&F extruded brass handles, fabricated type, polished of 200 mm size complete all as specified and directed.

Item No. 69 :- S&F MS Peg set of six powder coated as approved by GE, complete all as specified and directed

Item No. 70 :- S&F in repair mild steel conduit curtain rod with PVC coating fancy type curtain rod 20mm dia of any colour as approved complete including side mounting end fixture (globe type), complete all as specified and directed

Item No. 71 :- S&F in repair mild steel Bracket with PVC coating fancy type for curten rod 20 mm dia of any colour as approved complete.

Item No. 72 :- S&F in mild steel conduit curtain rod with PVC coating fancy type curtain rod 20mm dia of any colour as approved complete including side mounting end fixture (globe type), complete all as specified and directed

Item No. 73 :- S&F mild steel Bracket with PVC coating fancy type for curten rod 20 mm dia of any colour as approved complete.

Item No 74 : Taking down and refixing shutter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed

Item No 75 : Taking down and refixing shutter of any description n exc 1 sqm each complete all as specified and directed

Item No. 76 :- S&F continuous (Piano) hinges,mild steel, bright finish or electro galvanised width of flaps (when open) 30 mm complete all as specified and directed.

Item No. 77 :- Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Item No. 78 :- Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

Item No. 79 :- S&F GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed.

Item No. 80 :- S&F GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed.

Item No. 81 :- Fixing only GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed.

Item No. 82 :- Fixing only GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed.

Item No. 83 :- M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good in brick walls, cutting not exceeding 10 cm girth complete all as specified and directed.

Item No. 84 :- S&F in repair chromium plated single lever basin mixer single lever withouy popup waste system with 450 mm long braided hoses complete.

Item No. 85 :- S&F in repair chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower cimplete with 115mm long bend pipe, connecting legs and flange complete.

Item No. 86 :- S&F in repair vitrecous china WHB size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete.

Item No. 87 :- S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) including fixing bolts & excluding flushing cistern and flush pipe complete all as specified and as directed.

Item No. 88 :- S&F in repair vitreous china squating pan 'Orissa' pattern WC size 580x400 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor all as specified and as directed.

Item No. 89 :- S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete.

Item No. 90 :- S&F in repair chromium plated health foucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete.

Item No. 91 :- S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed.

Item No. 92 :- S&F cabinet mirror, box type of size 19" x 21" of colour as approved fixed to wall compete.

Item No. 94 :- S&F in repair bib tap 15 mm bore, long body chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete.

Item No. 95 :- S&F for repair 15mm bore pillar taps cast copper alloy, with capstan head chromium plated screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly-nuts screwed for iron pipe & fixed complete.

Item No. 96 :- S&F for repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete.

Item No. 97 :- S&F for repair aluminium anodised tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

Item No. 98 :- S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe.

Item No. 99 :- S&F 15 mm concealed type stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup.

Item No. 100 :- S&F in repair of stainless steel soap dish, of standard size and shape complete.

Item No. 101 :- S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, & waste pipe incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm complete.

Item No. 102 :- S&F in repair sinks without drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washes and waste pipe incl bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete.

Item No. 103 :- S&F repair 0.63 mm thick kitchen plate rack made of astainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified.

Item No. 104 :- S&F 0.63 mm thick kitchen plate rack made of astainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified.

Item No. 105 :- S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed

Item No. 106 :- S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC.

Item No. 107 :- S&F PVC (SWR) 'P' trap for 110 mm dia etc complete.

Item No. 108 :- S&F in repair chromium plated toilet paper holder with flap complete.

Item No. 109 :- M&L for RCC (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in kitchen platform, shelves & chhajja and similar work incl form work complete all as specified and directed. Note - Reinforcement shall be measured and paid separately.

Item No. 110 :- M&L for 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including edge moulding & cutting hole for gas pipe and similar work and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Item No. 111 :- M&L for machine cut cudappah stone slab 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Item No. 112 :- Mild Steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Item No. 113 :- Mild Steel TMT bar 8 mm dia cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Item No. 114 :- Taking down of eaves gutters and rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

Item No. 115 :- M&L for PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed.

Item No. 116 :- S&F for PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and directed.

Item No. 117 :- S&F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed.

Item No. 118 :- S&F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 50 mm bore of pipe etc complete all as specified and directed.

Item No. 119 :- S&F stack clamps made out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nut and securing ends of stays to wall or roof for 110 mm bore of pipe complete all as specified and directed.

Item No. 120 :- S&F stack clamps made out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nut and securing ends of stays to wall or roof for 75 mm bore of pipe complete all as specified and directed.

Item No. 121 :- S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed.

Item No. 122 :- S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed.

Item No. 123 :- S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed

Item No. 124 :- S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed.

Item No. 125 :- S&F PVC (SWR) branch pieces, single (equal or un equal), ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door.

Item No. 126 :- S&F PVC (SWR) branch pieces, single (equal or un equal), ordinary or inverted (spigot or socket type) or with parralled branches of 75 mm dia with access door.

Item No. 127 :- S&F PVC (SWR) vent cowl 110 mm bore

Item No. 128 :- S&F PVC (SWR) nahani/floor trap, plain with grating with or without waste hole including jointing with solvent cement 75 mm dia etc complete.

Item No. 129 :- Dismantling water tanks and removing to store of capacity exc 250 and n exc 500 ltrs all as specified.

Item No. 130 :- Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs all as specified.

Item No. 131 :- S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity all as specified.

Item No. 132 :- S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacity all as specified.

Item No. 133 :- S&F Ball valves 20mm dia high pressure pf PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm -210gms) complete.

Item No. 134 :- S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete.

Item No. 135 :- M&L for preparation of new weeden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete.

Item No. 136 :- M&L for preparation of new steel surfaces any description, any described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete.

Item No. 137 :- Removing old paints by paint removes or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth complete.

Item No. 138 :- M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete.

Item No. 139 :- M&L for applying 2mm thick wall care Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and rubbing with sand paper and making the surface even & smooth complete all as specified and directed.

Item No. 140 :- M&L for apply 2mm thick wall care Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and rubbing with sand paper and making the surface even & smooth complete all as specified and directed.

Item No. 141 :- M&L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including rubbing the surface absolutely even and smooth complete all as specified and directed.

Item No. 142 :- M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including rubbing the surface absolutely even and smooth complete all as specified and directed.

Item No. 143 :- M&L for preparation of old plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, making goods and applying two coat of white wash complete.

Item No. 144 :- M&L for preparation of new plastered surfaces of ceilings and apply three coat of white wash complete all as specified and directed.

Item No 145 : M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

Item No. 146 :- M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete.

Item No. 147 :- M&L for preparation of old plastered surfaces of ceilings and apply two coat of white wash complete all as specified and directed.

Item No. 148 :- M & L for two coats of cement based paint over a coat of alkali primer on new plastered surface of walls including preparation of surface complete all as specified and directed.

Item No. 149 :- M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down andstopping andapplying two coat of cement base paint white or tinted complete all as specified as directed.

Item No. 150 :- Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified. (IWPC will be paid separately)

Item No. 151 :- M&L water proofing treatment on "Non approachable / non accessible and approachable roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete

(a) 10 mm thick rendering on roof surface/concrete surface in CM 1:4

(b) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg/Sqm

(c) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm incl cleaning surfaces.

(d) Laying unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less then 3kg/Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instructions.

(e) Applying two coats of bituminous aluminium paint including preparation complete

Item No 152 : M&L for cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in roof padding / kerb / sunken slab etc and similar work including necessary form work and , complete all as specified and directed.

Item No 153 : M&L for cement concrete tiles of size 250 mm x 250 mm x 20-22 mm thick machine pressed set jointed and pointed in neat cement slurry in floor and cut and polished with grey cement and no pigment over and including 15 mm thick screed bed in cement mortor 1:4 complete all as specified and directed..

Item No. 154 :- Dismantling timber scantlings 40 sqcm and over in section as in framed work in any position complete all as specified and directed.

Item No. 155 :- Dismantling of timber under 40 sqcm in section as in unframed work in any position as in fillets ,rails, posts, rafters ,purlins etc complete all as specified and directed.

Item No. 156 :- M&L for second class hard wood (SAL) in scantlings clean swan in unframed work as in rafter purlines etc complete all as specified and directed.

Item No. 157 :- Dismantling boarding, any description, fixed in any position with nails complete all as speified and directed

Item No. 158 :- M&L for suspended false ceiling using Chicago metallic E-Graid exposed suspended sys, grid sec size 600 x 600 mm comprising of GI powder coaed main runners of dim 39 x 24 x 360 x 0.88 mm thick(thickness comprising 0.40 mm + PPP GSO 30 mm and weight of runners 1.35 kg for 360 mm length. Gross T of demesnes of 29 x 24 x 600 x 0.80 mm thick. the thickness of comprising GI 0.40 mm + PPPC GS (0.30mm and weight of T 0.195 kg for 6000 mm length) and wall angle of dimension 22.2 x 22.20 x 3050 x0.65 thick (the thickness comprising of GI0.35mm + PPGC GS 0.30 and eight of angle 0.70 kg for 3050 mm length) with and including 4 mm thick HPSC (Tugs pressure steam cured) Preprimedm self embossed texture dingier bound water termited and sesistant for including and acoustic purpose the to be placed in the grid system duly suspended with 4mm dia GI war hangers fixed with steel dash trough fasteners from purline of the roof with butterflyclips (wt 0.007 kg per clip) hold down clip wt 0.0035 kg per clip) with provision of complete all as specified. NNote:- PPPCGS Densts Prep anted Polysters Coated Galvanised steel.

Item No. 159 :- S&F rolled mild steel section in roof trusses (framed), trussed, purlins, crane gantries,rail and fastenings and heavy bracket framing (beam, tee, angle,channel or flat sections) including distance pieces, cleat etc of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed.

Item No. 160 :- S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long and 11 to 15 mm dia of shank complete all as specified and directed.

Item No. 161 :- S&F MS flat iron as in wind ties or similar work conforming to Fe -290 Gde E-165 including cutting, drilling ,bolting or riveting etc complete all as specified and directed.

Item No. 162 :- Dismantling of AC plain or corrugated any type of sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Item No. 163 :- Pre-painted galvalume zinc coating GI based corrugated,steel sheet 0.50mm thick of an colour having tensile strength of 550 MPA as in roof covering/cladding to wall, including ridge of same colour fixed with self tapping screws as specified.

Item No. 164 :- Pre-painted galvalume zinc coating GI based ridge / gutter factory made steel sheet 0.50mm thick of an colour having tensile strength of 550 MPA as in roof covering/cladding to wall, including ridge of same colour fixed with self tapping screws as specified.

Item No 165 :- M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Item No 166:- M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Item No 167 :- M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

Item No 168 :- All as per above item 153 but for add or deduct for each 25 mm girth or part thereof over or under 30 cm

Item No. 169 :- S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

Item No. 170 :- S&F welded steel wire fabric and fixed complete to wood or steel members weight n. exc 4 kg/Sqm, complete all as specified and directed.

Item No. 171 :- M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Item No. 172 :- Excavation in soft / loose soil for post holes (or similar holes) each not exceeding 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed.

Item No. 173 :- Surface excavation not exceeding 30 cm deep and averaging15 cm deep and getting out in any type of soil complete all as specified and directed.

Item No. 174 :- Add to (or deduct from) above item for every 3 cm or part thereof above or below 15 cm average depth in any type of soil complete all as specified and directed.

Item No. 175 :- Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m depth in any type soil etc complete all as specified and directed.

Item No. 176 :- Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m depth in hard / dense soil etc complete all as specified and directed.

Item No. 177 :- Excavation over areas not exceeding 1.5m deep and getting out in hard / dense soil complete all as specified and directed.

Item No. 178 :- Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soil etc complete all as specified and directed

Item No. 179 :- Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

Item No. 180 :- M&L moorum / red bajri filling in floors or pavings laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Item No. 181 :- M&L Broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Item No. 182 :- M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete for embedding of precast post, complete all as specified and directed.

Item No. 183 :- S&F Rubber mould casted machine pressed precast concrete interlocking paver block (Glossy finish) any shape and size confirming to IS 15658-2006 of 60 mm M-30 Grade with grey cement and pigment over 25mm thick sand cushioning complete all as specified and directed.

Item No. 184 :- Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforing to Fe-290 Gde E-165, A quality complete..

Item No. 185 :- M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and directed.

Item No. 186 :-S&F reinforced concrete pipes, class NP-2, laid and jointed with collars of150 mm bore of pipe complete all as specified and directed.

Item No. 187 :-S&F 100 mm Cast Iron Soil,Waste And Vent Pipes,In Any Length With Or Without Ears,With Cement Joints,Laid In Trenches Or In Floors complete all as specified and directed.

Item No. 188 :-S&F 50 mm bore medium grade Galvanised steel water tubing with & including all fittings heavy grade ISI marked, laid in tranches complete all as specified.

Item No. 189 :- M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick or concrete surface of ceiling finished even and smooth without ussing extra cement, complete all as specified and directed.

Item No. 190 :- Excavation in hard / dense soil for post holes (or similar holes) each not exceeding 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed.

Item No. 191 :- M & L Hand rail, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, nosing to steps including embeddding in concrete and screwing etc. post and struts in fencing including cutting tops to shap, drilling holes, notching for wire etc, conforming to Fe-250 Gde E-165, A quality complete..

Item No. 192 :- 4 mm dia galvanised steel wire, made up into mattresses or cages, lapped, wired and laid in position, complete as directed.

Item No. 193 :- Galvanized, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of posts, straining bolts,standard bolt, including securing or tying at crossing with and including provision of galvanized mild steel wire staples or steel pins, etc complete all as specified and directed (Each line of wire to be measured for the purpose of payment).

Item No. 194 :- Form work to sides of concrete foundations, footings, bases of columns, plinth and raft beams, sides and soffits (if any) of foundation and plinth beams etc and similar work, vertical or to batter for rough finished flat concrete surfaces complete all as specified.

Item No. 195 :- Form work to sides of pillars, posts, struts, piers, columns and stanchions for square, rectangular or polygonal fair finished concrete surface complete all as specified and directed.

Item No 196 : M&L for RCC (nominal mix) 1:2:4 type B1 using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed . Note - Reinforcement and form work shall be measured and paid separately.

Item No 197 : M&L for RCC (nominal mix) 1:2:4 type B1 using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts and similar work complete all as specified and directed. Note - Reinforcement and form work shall be measured and paid separately.

Item No. 198 :- M&L for preparation of new plastered surfaces of wall and apply three coat of white wash complete all as specified and directed.

INTERNAL ELECTRIFICATION

Item No. 199 :- Taking down copper / aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed. (Note: New Points for AC, Geysers, & Exhaust fan not considered for taking down.)

Item No. 200 :- Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN / Main Switch including old unserviceable MCCBs /MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site.

Item No. 201 :- Taking down carefully copper/aluminium Sub main wiring of any size from surface /concealed /existing conduit of any height and removing materials at size and making good disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

Item No. 202 :- Taking down old/unserviceable Geyser of any capacity after disconnecting all necessary electrical and water supply connection and deposite to MES store yard and making good to disturbed surface all as specified and directed at site.

Item No. 203 :- Taking down ceiling fan/exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and directed.

Item No. 204 :- Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and deposit to MES store yard of AGE E/M complete all as specified and directed.

Item No. 205 :- M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-894 marked drawn through in and including heavy duty, PVC concealed conduit of white/ivory colour including all accessories, heavy duty ISI marked, after chasing in wall/ceiling etc with sunk in anodized pressed steel box 1.6 mm thick, 60mm deep for housing switch socket etc with white laminated 3 mm thick sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal incl cutting, chases and making good disturbed surface to match with existing finish with plaster for complete all as specified and directed by Engr-in-charge

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One light point controlled by one, two way switch 5 amps

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One 3 pin 5 Amps switch outlet point controlled by one switch on independent board.

(f) One bell point controlled by one, bell switch 5 Amps

Item No. 206 :- All as per item No 205 but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

Item No. 207 :- M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One light point controlled by one, two way switch 5 amps

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One 3 pin 5 Amps switch outlet point controlled by one switch on independent board.

(f) One bell point controlled by one, bell switch 5 Amps

Item No. 208 :- All as per item No 207 but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

Item No. 209 :- All as per item No 207 but using 4.0 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point)

Item No. 210 :- S&F switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site.

Item No. 211 :- S&F switch Piano type 2 way switch 5 amp, 230 Volts complete all as specified and directed at site.

Item No. 212 :- S&F switch bell push piano type 5 amp, 230 Volts complete all as specified and directed at site.

Item No. 213 :- S&F socket outlet 2 in 1, 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.

Item No. 214 :- S&F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fiffing complete all as specified.

Item No. 215 :- S&F for stepped type electronic fan regulator flush Type complete all as specified and directed at site.

Item No. 216 :- S&F for Modular switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

Item No. 217 :- S&F for Modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

Item No. 218 :- S&F for Modular switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified.

Item No. 219 :- S&F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6Amp, 2 module piano flush type complete all as specified.

Item No. 220 :- S&F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6Amp, 2 module piano flush type complete all as specified.

Item No. 221 :- S&F for Bell push modular 6 Amps single module complete all as specified.

Item No. 222 :- S&F for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten / slanting fittings complete all as specified and directed.

Item No. 223 :- S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ AC supply complete all as specified and directed.

Item No. 224 :- S&F for Switch piano type single pole 15 amp, 230 Volts complete all as specified and directed at site.

Item No. 225 :- S&F for socket outlet 2 in 1, 5 pin, 5/15 amp, 230 volts complete all as specified and directed at site.

Item No. 226 :- S&F for modular step type fan regulator120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed at site.

Item No. 227 :- S&F for modular type TV socket out let, complete all as specified.

Item No. 228 :- M&L for Sub main wiring with approved colour as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as direced. (Note:- Two runs of conductor cable, one run of earth wire and one run of PVC conduit will be measured as one unit)

Item No. 229 :- M&L for Sub main wiring with approved colour as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as direced. (Note:- four runs of conductor cable, two runs of earth wire and one run of PVC conduit will be measured as one unit)

Item No. 230 :- S&F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distruebed surface to match with existing colour of wall complete all as specified and as directed.

Item No. 231 :- S&F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distruebed surface to match with existing colour of wall complete all as specified and as directed.

Item No. 232 :- S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 233 :- S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 234 :- S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 235 :- S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and directed.

Item No. 236 :- S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL diect fir lamp, in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed.

Item No. 237 :- S & F Decorative wall mounted luminaire made our of polycarbonate with unbreakable globe suitable for LED bulb and including provision of LED bulb 10 Watts complete all as specified and directed. (Make Havells Cat Part No LHDL 06160099 or its equivalent as per Group-I of list of make.)

Item No. 238 :- S & F LED 10 Watts batten aluminium extruded with decorative end caps complete all as specified and as directed. (Make- Bajaj Cat Part No BCLSB 10 WH or its equivalent as per Group-I of list of make.)

Item No. 239 :- S & F Energy saving new generation 10 Watts LED bulk head fitting IP-65 luminaire with opel diffuser pre wired, with warranty option of 5 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 form ceiling rose to fitting including LED bulb complete all as directed. (Make :- Bajaj Cat No. BIBWP 10W LED or its as per Group-I of list of make)

Item No. 240 :- S & F for wall mounted LED tube light fitting 20 watts batten for surface molnted, anodized extrded aluminium housing, high transmissitivity diffuser, high lumen etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make:- Bajaj Cat Part No BCLSB 20 W, Wipro Cat part No LL20-281-XXX065-ALI or its equvalent as per Group-I of list of make.

Item No. 241 :- S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements with warranty option of 5 years from date of installation/completion and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer-in-charge. Make :- Bajaj Cat Part No BRLEP 25W LED WH (Edge plus series) or its equivalentas per Group-I of list of make.

Item No. 242 :- Fixing only ceiling fans with replacement of UNSV 3 core PVC insulated PVC sheased 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling the fan, spray painting the fan body and wings with syntetic enamel paint of white colour and filling the cavities complete all as specified and directed.

Item No. 243 :- S & F for Energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 Cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable o size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick for fan base complete all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

Item No. 244 :- S & F for ceiling fan 230 Volts, 1200 mm sweep with main air delivery 210 CFM, service value of the fan shall be greater than 6.1 as per BIS with blades, down rod & other necessary accessories with bushless direct current motor (BLDC) and electrical connections from ceiling rose to fan terminal complete all as specified and directed.

Item No. 245 :- S & F for water heater storage type (Geyser) vertical/Horizental type as per site requirement with inner contaner of capacity 25 ltrs, electrically operated, AC 230 Volts, BEE 5 star reted, ISI marked including 04 Nos of hold fechner nuts required suitable size fixed in brick wall, PVC connection pipe hot & cold complete all as specified and directed.

Item No. 246 :- S&F for PVC non-metallic rigid conduit ISI marked heavy duty white/ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting chases and making good disturbed surfaces to match with existing finish with plaster complete all as specified and directed.

Item No. 247 :- supply and laying of three phase electric energy meter accuracy class 1.0, 240 V, with in-home display 10-60 A, 3 Nos self locking meter seal, LCD display with optical port, anti temper features, instantaneous KW, volts, PF, Hz, MD, total tamper count, self billing code, battery backup in 04 Nos complete all as specified and directed. (Make : L&T, Cat No : WR301BC7D10/Secure, HPL)

Item No. 248 :- Supply, installation, commissioning and testing indoor wall mounting LT Panel Board of minimum size 1.50 m (height) x 1.20 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four comparment for fixing of four nos Three phase meter and MCB TPN and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with PVC tape/ sleeves with maintainedvthe colour code and copper strip/wire busbar of suitable size ot MCCB input and MCCB /MCB output of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle in supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external internal surface suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 10 Sqmm copper wire and connections of all outgoing / incomming existing cable of any size and removing existing unsv one complete all as directed by Engineer-in-Charge.(For Officers Accn)

OUTGOING (a) MCB, Tripple pole & neutral, 40 amps, 415 volts, 'C' curve, 10 KA all complete as specified and as directed - 4 Nos (Officers Accn) (b) MCB, single pole & neutral, 10 amps, 240 volts, 'C' curve, 10 KA all complete as specified and as directed - 01 Nos (Stair case lighting) (c) Fixing only serviceableexisting electric meter- 01 No. (d) Supply and Installation of Smart Three Phase Meter AC Three Phase Four Wire, Tamper Proof, Static Meter of Class 1.0, 415V, 50 Hz, 10 A-60 A conforming IS-16444 and relevant IEC sstandards with inbuilt 865-867 MHz Radio Frequency communication facility with self healing Mesh metwork with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED/LCD based circuitry. Meter should support the following data : 30 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, 30 load survey data for energy, monthly filling survey for cumulative Energy and Max demand. Meter should have connect / disconnect functionality operable compactable system from prepaid billing software in future. the meter should support open communication protocol DLMS with the software - 04 Nos. Make:- Secure, L&T, Schneider

Item No. 249 :- Supply, installation, commissioning and testing indoor wall mounting LT Panel Board of minimum size 1.20 m (height) x 1.20 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four comparment for fixing of four nos single phase meter and MCB and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip/wire busbar of suitable size to MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with6 sqmm copper wire and connections of all outgoing / incomming existing cable of any size and removing existing unsv one complete all as directed by Engineer-in-Charge. (For JCO/Ors Md Accn)

External Water Supply/ELECTRIC SUPPLY

Item No. 250 :- Supply and laying un-reinforced precast concrete cable cover LV, type 1 with peak of size 250 mm x 150 mm x 40 mm with minimum average breaking load 200 kg as per IS 5820:1970, ISI marked, complete all as specified.

Item No. 251 :- Boring holes horizontally under Road without damaging the surface of road (minimum 1.0 Mtr below the road surface with the help of GI tubing of any dia not exceed 80 mm bore for passing of UG cable all mas specified and as directed (GI pipe laid shall be measured seperately).

Item No. 252 :- Supply & laying 40 mm dia GI tubes Light grade in protection of cable at road crossing/ hard standing/pole protection fixed with clamps as per site requirement etc of following sizes complete all as specified and directed.

Item No. 253 :- Supply & laying 25 mm dia GI tubes Light grade in protection of cable at road crossing/ hard standing/pole protection fixed with clamps as per site requirement etc of following sizes complete all as specified and directed.

Item No. 254 :- Supply, spread and filling approved sand in cable trenches for cushioning of UG cable all as specified. Note: Punned thickness only will be measured and paid.

Item No. 255 :- Taking down existing old Extg unserviceable LT UG/ service cable of any description and size complete all as specified and directed.

Item No. 256 :- Supply and laying testing commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of following sizes complete all as specified and directed.

(a) 4 core x 35 Sqmm

(b) 4 core x 25 Sqmm

(c) 4 core x 16 Sqmm

(d) 2 core x 10 Sqmm

Item No. 257 :- M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level, with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part -I including excavation and earthwork in any type of soil/strata and testing on completion Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

SCHEDULE "A" (Schedule of credit) Schedule of Credit Rs 1320635.30 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net bid amount)

S.K. MINERALS

M A Builders

MD BUILDER

JAIDEV SINGH CHADHA

Mata Builders